2020-26147. Small Vertical Shaft Engines From China; Scheduling of the Final Phase of Countervailing and Antidumping Duty Investigations

AGENCY:

United States International Trade Commission.

ACTION:

Notice.

SUMMARY:

The Commission hereby gives notice of the scheduling of the final phase of antidumping and countervailing duty investigation Nos. 701-TA-643 and 731-TA-1493 (Final) pursuant to the Tariff Act of 1930 (“the Act”) to determine whether an industry in the United States is materially injured or threatened with material injury, or the establishment of an industry in the United States is materially retarded, by reason of imports of small vertical shaft engines from China, provided for in subheadings 8407.90.10, 8409.91.99, 8433.11.00, 8424.30.90, and 8407.90.90 of the Harmonized Tariff Schedule of the United States, preliminarily determined by the Department of Commerce (“Commerce”) to be subsidized and sold at less-than-fair-value.

DATES:

October 21, 2020.

FOR FURTHER INFORMATION CONTACT:

Charles Cummings ([phone]), Office of Investigations, U.S. International Trade Commission, 500 E Street SW, Washington, DC 20436. Hearing-impaired persons can obtain information on this matter by contacting the Commission's TDD terminal on 202-205-1810. Persons with mobility impairments who will need special assistance in gaining access to the Commission should contact the Office of the Secretary at 202-205-2000. General information concerning the Commission may also be obtained by accessing its internet server (https://www.usitc.gov). The public record for these investigations may be viewed on the Commission's electronic docket (EDIS) at https://edis.usitc.gov.

SUPPLEMENTARY INFORMATION:

Scope.— For purposes of these investigations, Commerce has defined the subject merchandise as spark-ignited, nonroad, vertical shaft engines, whether finished or unfinished, whether assembled or unassembled, whether mounted or unmounted, primarily for walk-behind lawn mowers. Engines meeting this physical description may also be for other non-handheld outdoor power equipment, including but not limited to, pressure washers. The subject engines are spark ignition, single-cylinder, air cooled, internal combustion engines with vertical power take off shafts with a minimum displacement of 99 cubic centimeters (cc) and a maximum displacement of up to, but not including, 225cc. Typically, engines with displacements of this size generate gross power of between 1.95 kilowatts (kw) to 4.75 kw. Engines covered by this scope normally must comply with and be certified under Environmental Protection Agency (EPA) air pollution controls title 40, chapter I, subchapter U, part 1054 of the Code of Federal Regulations standards for small nonroad spark-ignition engines and equipment. Engines that otherwise meet the physical description of the scope but are not certified under 40 CFR part 1054 and are not certified under other parts of subchapter U of the EPA air pollution controls are not excluded from the scope of this proceeding. Engines that may be certified under both 40 CFR part 1054 as well as other parts of subchapter U remain subject to the scope of this proceeding.

Certain small vertical shaft engines, whether or not mounted on non-hand-held outdoor power equipment, including but not limited to walk-behind lawn mowers and pressure washers, are included in the scope. However, if a subject engine is imported mounted on such equipment, only the engine is covered by the scope. Subject merchandise includes certain small vertical shaft engines produced in the subject country whether mounted on outdoor power equipment in the subject country or in a third country. Subject engines are covered whether or not they are accompanied by other parts.

For purposes of these investigations, an unfinished engine covers at a minimum a sub-assembly comprised of, but not limited to, the following components: Crankcase, crankshaft, camshaft, piston(s), and connecting rod(s). Importation of these components together, whether assembled or unassembled, and whether or not accompanied by additional components such as a sump, carburetor spacer, cylinder head(s), valve train, or valve cover(s), constitutes an unfinished engine for purposes of these investigations. The inclusion of other products such as spark plugs fitted into the cylinder head or electrical devices (e.g., ignition coils) for synchronizing with the engine to supply tension current does not remove the product from the scope. The inclusion of any other components not identified as comprising the unfinished engine subassembly in a third country does not remove the engine from the scope. Specifically excluded from the scope of these investigations are “Commercial” or “Heavy Commercial” engines under 40 CFR 1054.107 and 1054.135 that have (1) a displacement of 160 cc or greater, (2) a cast iron cylinder liner, (3) an automatic compression release, and (4) a muffler with at least three chambers and volume greater than 400 cc.

Background.—The final phase of these investigations is being scheduled pursuant to sections 705(b) and 731(b) of the Tariff Act of 1930 (19 U.S.C. 1671d(b) and 1673d(b)), as a result of affirmative preliminary determinations by Commerce that certain benefits which constitute subsidies within the meaning of § 703 of the Act (19 U.S.C. 1671b) are being provided to manufacturers, producers, or exporters in China of small vertical shaft engines, and that such products are being sold in the United States at less than fair value within the meaning of § 733 of the Act (19 U.S.C. 1673b). The investigations were requested in petitions filed on March 18, 2020, by Briggs & Stratton Corporation, Wauwatosa, Wisconsin.

For further information concerning the conduct of this phase of the investigations, hearing procedures, and rules of general application, consult the Commission's Rules of Practice and Procedure, part 201, subparts A and B (19 CFR part 201), and part 207, subparts A and C (19 CFR part 207).

Participation in the investigations and public service list.—Persons, including industrial users of the subject merchandise and, if the merchandise is sold at the retail level, representative consumer organizations, wishing to participate in the final phase of these investigations as parties must file an entry of appearance with the Secretary to the Commission, as provided in § 201.11 of the Commission's rules, no later than 21 days prior to the hearing date specified in this notice. A party that filed a notice of appearance during the preliminary phase of the investigations need not file an additional notice of appearance during this final phase. The Secretary will maintain a public service list containing the names and addresses of all persons, or their representatives, who are parties to the investigations.

Please note the Secretary's Office will accept only electronic filings during this time. Filings must be made through the Commission's Electronic Document Information System (EDIS, https://edis.usitc.gov.) No in-person paper-based filings or paper copies of any electronic filings will be accepted until further notice.

Limited disclosure of business proprietary information (BPI) under an administrative protective order (APO) and BPI service list.—Pursuant to § 207.7(a) of the Commission's rules, the Secretary will make BPI gathered in the final phase of these investigations available to authorized applicants under the APO issued in the investigations, provided that the application is made no later than 21 days prior to the hearing date specified in this notice. Authorized applicants must represent interested parties, as defined by 19 U.S.C. 1677(9), who are parties to the investigations. A party granted access to BPI in the preliminary phase of the investigations need not reapply for such access. A separate service list will be maintained by the Secretary for those parties authorized to receive BPI under the APO.

Staff report.—The prehearing staff report in the final phase of these investigations will be placed in the nonpublic record on February 23, 2021, and a public version will be issued thereafter, pursuant to § 207.22 of the Commission's rules.

Hearing.—The Commission will hold a hearing in connection with the final phase of these investigations beginning at 9:30 a.m. on Tuesday, March 9, 2021. Information about the place and form of the hearing, including about how to participate in and/or view the hearing, will be posted on the Commission's website at https://www.usitc.gov/​calendarpad/​calendar.html. Interested parties should check the Commission's website periodically for updates. Requests to appear at the hearing should be filed in writing with the Secretary to the Commission on or before Wednesday, March 3, 2021. A nonparty who has testimony that may aid the Commission's deliberations may request permission to present a short statement at the hearing. All parties and nonparties desiring to appear at the hearing and make oral presentations should attend a prehearing conference to be held at 9:30 a.m. on Friday, March 5, 2021, if deemed necessary. Oral testimony and written materials to be submitted at the public hearing are governed by sections 201.6(b)(2), 201.13(f), and 207.24 of the Commission's rules. Parties must submit any request to present a portion of their hearing testimony in camera no later than 7 business days prior to the date of the hearing.

Written submissions.—Each party who is an interested party shall submit a prehearing brief to the Commission. Prehearing briefs must conform with the provisions of § 207.23 of the Commission's rules; the deadline for filing is March 2, 2021. Parties may also file written testimony in connection with their presentation at the hearing, as provided in § 207.24 of the Commission's rules, and posthearing briefs, which must conform with the provisions of § 207.25 of the Commission's rules. The deadline for filing posthearing briefs is March 15, 2021. In addition, any person who has not entered an appearance as a party to the investigations may submit a written statement of information pertinent to the subject of the investigations, including statements of support or opposition to the petitions, on or before March 15, 2021. On March 30, 2021, the Commission will make available to parties all information on which they have not had an opportunity to comment. Parties may submit final comments on this information on or before April 1, 2021, but such final comments must not contain new factual information and must otherwise comply with § 207.30 of the Commission's rules. All written submissions must conform with the provisions of § 201.8 of the Commission's rules; any submissions that contain BPI must also conform with the requirements of §§ 201.6, 207.3, and 207.7 of the Commission's rules. The Commission's Handbook on Filing Procedures, available on the Commission's website at https://www.usitc.gov/​documents/​handbook_​on_​filing_​procedures.pdf,, elaborates upon the Commission's procedures with respect to filings.

Additional written submissions to the Commission, including requests pursuant to § 201.12 of the Commission's rules, shall not be accepted unless good cause is shown for accepting such submissions, or unless the submission is pursuant to a specific request by a Commissioner or Commission staff.

In accordance with §§ 201.16(c) and 207.3 of the Commission's rules, each document filed by a party to the investigations must be served on all other parties to the investigations (as identified by either the public or BPI service list), and a certificate of service must be timely filed. The Secretary will not accept a document for filing without a certificate of service.

Authority: These investigations are being conducted under authority of title VII of the Tariff Act of 1930; this notice is published pursuant to § 207.21 of the Commission's rules.

By order of the Commission.

Issued: November 20, 2020.

Lisa Barton,

Secretary to the Commission.