2021-25897. SGS North America, Inc.: Grant of Expansion of Recognition and Modification to the NRTL Program's List of Appropriate Test Standards

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces the final decision to expand the scope of recognition for SGS North America, Inc., as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces the addition of one test standard to the NRTL Program's List of Appropriate Test Standards.

DATES:

The expansion of the scope of recognition becomes effective on November 29, 2021.

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone: [phone]; email: [e-mail].

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone: [phone]; email: [e-mail]. OSHA's web page includes information about the NRTL Program (see http://www.osha.gov/​dts/​otpca/​nrtl/​index.html).

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

OSHA hereby gives notice of the expansion of the scope of recognition of SGS of North America, Inc. (SGS), as a NRTL. SGS's expansion covers the addition of five test standards to its scope of recognition. Additionally, OSHA announces the addition of one test standard to the NRTL Program's List of Appropriate Test Standards.

OSHA recognition of a NRTL signifies that the organization meets the requirements specified by 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.

The agency processes applications by a NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding and, in the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL that details the scope of recognition. These pages are available from the agency's website at http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

SGS submitted an application on February 5, 2020 (OSHA-2006-0040-0067), to expand its scope of recognition to include the addition of five test standards. OSHA staff performed a detailed analysis of the application packet and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

OSHA published the preliminary notice announcing SGS's expansion application and proposed addition to the NRTL Program's List of Appropriate Test Standards in the Federal Register on August 24, 2021 (86 FR 47336). The agency requested comments by September 8, 2021, but it received no comments in response to the preliminary notice. OSHA now is proceeding with this final notice to grant expansion of SGS's scope of recognition.

To obtain or review copies of all public documents pertaining to SGS's applications, go to http://www.regulations.gov or contact the Docket Office at [phone] (TTY [phone]) for assistance in locating docket submissions. Docket No. OSHA-2006-0040 contains all materials in the record concerning SGS's recognition.

II. Final Decision and Order

OSHA staff examined SGS's expansion application, the capability to meet the requirements of the test standards, and other pertinent information. Based on a review of this evidence, OSHA finds that SGS meets the requirements of 29 CFR 1910.7 for expansion of the recognition, subject to the specified limitation and conditions listed. OSHA, therefore, is proceeding with this final notice to grant expansion of SGS's scope of recognition. OSHA limits the expansion of SGS's scope of recognition to testing and certification of products for demonstration of conformance to the test standards listed in Table 1.

Table 1—List of Appropriate Test Standards for Inclusion in SGS's NRTL Scope of Recognition

Test standard	Test standard title
UL 355	Cord Reels.
UL 1576	Flashlights and Lanterns.
UL 1977	Component Connectors for Use in Data, Signal, Control and Power Applications.
UL 8753	Field-Replaceable Light Emitting Diode (LED) Light Engines.
UL 61800-5-1	Adjustable Speed Electrical Power Drive Systems—Part 5-1: Safety Requirements—Electrical, Thermal and Energy.

In this notice, OSHA also announces the addition of one new test standard to the NRTL Program's List of Appropriate Test Standards. Table 2, below, lists the test standard that is new to the NRTL Program. OSHA has determined that this test standard is an appropriate test standard and will include it in the NRTL Program's List of Appropriate Test Standards.

Table 2—Test Standard OSHA is Adding to the NRTL Program's List of Appropriate Test Standards

Test standard	Test standard title
UL 1576	Flashlights and Lanterns.

OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, a NRTL's scope of recognition does not include these products.

The American National Standards Institute (ANSI) may approve the test standard listed above as an American National Standard. However, for convenience, OSHA may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 01-00-004, Chapter 2, Section VIII), only standards determined to be appropriate test standards may be approved for NRTL recognition. Any NRTL recognized for an appropriate test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

A. Conditions

In addition to those conditions already required by 29 CFR 1910.7, SGS must abide by the following conditions of the recognition:

1. SGS must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in the operations as a NRTL, and provide details of the change(s);

2. SGS must meet all the terms of the recognition and comply with all OSHA policies pertaining to this recognition; and

3. SGS must continue to meet the requirements for recognition, including all previously published conditions on SGS's scope of recognition, in all areas for which it has recognition.

Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of SGS, subject to the limitation and conditions specified above. OSHA also adds one new test standard to the NRTL Program's List of Appropriate Test Standards.

III. Authority and Signature

James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, September 18, 2020), and 29 CFR 1910.7.

Signed at Washington, DC, on November 22, 2021.

James S. Frederick,

Deputy Assistant Secretary of Labor for Occupational Safety and Health.