2010-27946. Gear Certification Standard; Extension of the Office of Management and Budget's (OMB) Approval of Information Collection (Paperwork) Requirements
-
Start Preamble
AGENCY:
Occupational Safety and Health Administration (OSHA), Labor.
ACTION:
Request for public comments.
SUMMARY:
OSHA solicits public comments concerning its proposal to extend OMB approval of the information collection requirements specified in the Gear Certification Standard (29 CFR part 1919).
DATES:
Comments must be submitted (postmarked, sent, or received) by January 4, 2011.
ADDRESSES:
Electronically: You may submit comments and attachments electronically at http://www.regulations.gov,, which is the Federal eRulemaking Portal. Follow the instructions online for submitting comments.
Facsimile: If your comments, including attachments, are not longer than 10 pages, you may fax them to the OSHA Docket Office at (202) 693-1648.
Mail, hand delivery, express mail, messenger, or courier service: When using this method, you must submit a copy of your comments and attachments to the OSHA Docket Office, Docket No. OSHA-2010-0042, U.S. Department of Labor, Occupational Safety and Health Administration, Room N-2625, 200 Constitution Avenue, NW., Washington, DC 20210. Deliveries (hand, express mail, messenger, and courier service) are accepted during the Department of Labor's and Docket Office's normal business hours, 8:15 a.m. to 4:45 p.m., e.t.
Instructions: All submissions must include the Agency name and OSHA docket number for the Information Collection Request (ICR) (OSHA-2010-0042). All comments, including any personal information you provide, are placed in the public docket without change, and may be made available online at http://www.regulations.gov. Start Printed Page 68382For further information on submitting comments see the “Public Participation” heading in the section of this notice titled “Supplementary Information.”
Docket: To read or download comments or other material in the docket, go to http://www.regulations.gov or the OSHA Docket Office at the address above. All documents in the docket (including this Federal Register notice) are listed in the http://www.regulations.gov index; however, some information (e.g., copyrighted material) is not publicly available to read or download through the website. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. You may also contact Theda Kenney at the address below to obtain a copy of the ICR.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
Theda Kenney or Todd Owen, Directorate of Standards and Guidance, OSHA, U.S. Department of Labor, Room N-3609, 200 Constitution Avenue, NW., Washington, DC 20210; telephone (202) 693-2222.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
I. Background
The Department of Labor, as part of its continuing effort to reduce paperwork and respondent (i.e., employer) burden, conducts a preclearance consultation program to provide the public with an opportunity to comment on proposed and continuing information collection requirements in accordance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3506(c)(2)(A)). This program ensures that information is in the desired format, reporting burden (time and costs) is minimal, collection instruments are clearly understood, and OSHA's estimate of the information collection burden is accurate. The Occupational Safety and Health Act of 1970 (the OSH Act) (29 U.S.C. 651 et seq.) authorizes information collection by employers as necessary or appropriate for enforcement of the Act or for developing information regarding the causes and prevention of occupational injuries, illnesses, and accidents (29 U.S.C. 657). The OSH Act also requires that OSHA obtain such information with minimum burden upon employers, especially those operating small businesses, and to reduce to the maximum extent feasible unnecessary duplication of efforts in obtaining information (29 U.S.C. 657).
The ICR addresses the burden hours associated with gathering information to complete the OSHA 70 Form. The OSHA 70 Form is used by applicants seeking accreditation from OSHA to be able to test or examine certain equipment and material handling devices as required under the maritime regulations, part 1917 (Marine Terminals), and part 1918 (Longshoring). The OSHA 70 Form application for accreditation provides an easy means for companies to apply for accreditation. The collection of information needed to complete the OSHA 70 Form is necessary to provide an effective and efficient means of enabling employers and workers to determine if cargo gear, equipment and/or other material handling devices are safe to use. The information is collected every time a maritime material handling device is tested or examined. Proof-load examinations are conducted every four years, while visual examinations are conducted yearly.
II. Special Issues for Comment
OSHA has a particular interest in comments on the following issues:
- Whether the proposed information collection requirements are necessary for the proper performance of the Agency's functions, including whether the information is useful;
- The accuracy of OSHA's estimate of the burden (time and costs) of the information collection requirements, including the validity of the methodology and assumptions used;
- The quality, utility, and clarity of the information collected; and
- Ways to minimize the burden on employers who must comply; for example, by using automated or other technological information collection and transmission techniques.
III. Proposed Actions
OSHA is requesting that OMB extend its approval of the information collection requirements contained in the Standard on Gear Certification (29 CFR part 1919). The Agency is requesting that it retain its current estimate of 190 burden hours. The Agency will summarize the comments submitted in response to this notice and will include this summary in the request to OMB.
Type of Review: Extension of a currently approved collection.
Title: Gear Certification Standard (29 CFR part 1919); OSHA 70 Form.
OMB Number: 1218-0003.
Affected Public: Business or other for-profits.
Number of Respondents: 50.
Total Responses: 450.
Estimated Time per Response: Varies from 5 minutes (.08 hour) for an employer to disclose the OSHA 70 Form to an OSHA Compliance Officer during an inspection to 45 minutes (.75 hour) for a prospective accredited agency to complete the form.
Total Burden Hours: 190.
Estimated Cost (Operation and Maintenance): $2,872,640.
IV. Public Participation—Submission of Comments on this Notice and Internet Access to Comments and Submissions
You may submit comments in response to this document as follows: (1) Electronically at http://www.regulations.gov,, which is the Federal eRulemaking Portal; (2) by facsimile (fax); or (3) by hard copy. All comments, attachments, and other material must identify the Agency name and the OSHA docket number for the ICR (Docket No. OSHA-2010-0042). You may supplement electronic submissions by uploading document files electronically. If you wish to mail additional materials in reference to an electronic or facsimile submission, you must submit them to the OSHA Docket Office (see the section of this notice titled ADDRESSES). The additional materials must clearly identify your electronic comments by your name, date, and the docket number so the Agency can attach them to your comments.
Because of security procedures, the use of regular mail may cause a significant delay in the receipt of comments. For information about security procedures concerning the delivery of materials by hand, express delivery, messenger, or courier service, please contact the OSHA Docket Office at (202) 693-2350, (TTY (877) 889-5627).
Comments and submissions are posted without change at http://www.regulations.gov. Therefore, OSHA cautions commenters about submitting personal information such as social security numbers and date of birth. Although all submissions are listed in the http://www.regulations.gov index, some information (e.g., copyrighted material) is not publicly available to read or download through this Web site. All submissions, including copyrighted material, are available for inspection and copying at the OSHA Docket Office. Information on using the http://www.regulations.gov Web site to submit comments and access the docket is available at the website's “User Tips” link. Contact the OSHA Docket Office for information about materials not available through the website, and for assistance in using the Internet to locate docket submissions.
V. Authority and Signature
David Michaels, PhD, MPH, Assistant Secretary of Labor for Occupational Safety and Health, directed the preparation of this notice. The authority Start Printed Page 68383for this notice is the Paperwork Reduction Act of 1995 (44 U.S.C. 3506 et seq.) and Secretary of Labor's Order No. 4-2010 (75 FR 55355).
Start SignatureSigned at Washington, DC, on November 1, 2010.
David Michaels,
Assistant Secretary of Labor for Occupational Safety and Health.
[FR Doc. 2010-27946 Filed 11-4-10; 8:45 am]
BILLING CODE 4510-26-P
Document Information
- Comments Received:
- 0 Comments
- Published:
- 11/05/2010
- Department:
- Occupational Safety and Health Administration
- Entry Type:
- Notice
- Action:
- Request for public comments.
- Document Number:
- 2010-27946
- Dates:
- Comments must be submitted (postmarked, sent, or received) by January 4, 2011.
- Pages:
- 68381-68383 (3 pages)
- Docket Numbers:
- Docket No. OSHA-2010-0042
- PDF File:
- 2010-27946.pdf
- Supporting Documents:
- » Agency Information Collection Activities: Announcement of the Office of Management and Budget (OMB) Control Numbers Under the Paperwork Reduction Act
- » Supporting Statement for the Information Collection Requirements of the Standard on Gear Certification (29 CFR Part 1919)1 Office of Management and Budget (OMB) Control No. 1218-0003 (May 2020)
- » Gear Certification Standard; Revision of the Office of Management and Budget’s (OMB) Approval of Information Collection (Paperwork) Requirements
- » Agency Information Collection Activities: Announcement of the Office of Management and Budget (OMB) Control Numbers Under the Paperwork Reduction Act
- » Supporting Statement for the Information Collection Requirements of the Standard on Gear Certification (29 CFR Part 1919) Office of Management and Budget (OMB) Control No. 1218-0003 (December 2016)
- » Agency Information Collection Activities; Proposals, Submissions, and Approvals: Gear Certification Standard
- » Agency Information Collection Activities: Announcement of the Office of Management and Budget (OMB) Control Numbers Under the Paperwork Reduction Act
- » Information Collection Requirements (ICR) and Supporting Statement for Gear Certification (29 CFR 1919)
- » Gear Certification Standard; Extension of the Office of Management and Budget's Approval of Information Collection (Paperwork) Requirments
- » Supporting Statement for the Information Collection Requirements of the Standard on Gear Certification (29 CFR Part 1919)1 Office of Management and Budget (OMB) Control No. 1218-0003 (October 2010)