2012-26972. Hardwood and Decorative Plywood From the People's Republic of China: Initiation of Antidumping Duty Investigation; Correction

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

DATES:

Effective Date: November 5, 2012.

FOR FURTHER INFORMATION CONTACT:

Catherine Bertrand or Katie Marksberry at [phone] or [phone], respectively, AD/CVD Operations, Office 9, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue NW., Washington, DC 20230.

Background: The Department of Commerce published a notice in the Federal Register on October 25, 2012, concerning the initiation of an antidumping duty investigation of hardwood and decorative plywood from the People's Republic of China.^[1] The document as published did not include Appendix I, which was referenced in the “Scope of the Investigation” section. The referenced scope language is appended to this notice.

Dated: October 26, 2012.

Paul Piquado,

Assistant Secretary for Import Administration.

Appendix I—Scope of the Investigation

Hardwood and decorative plywood is a panel composed of an assembly of two or more layers or plies of wood veneer(s) in combination with a core. The several layers, along with the core, are glued or otherwise bonded together to form a finished product. A hardwood and decorative plywood panel can be composed of one or more species of hardwoods, softwoods, or bamboo, (in addition to other materials that are used for the core, as detailed below).

Hardwood and decorative plywood is generally manufactured to American National Standard for Hardwood and Decorative Plywood, ANSI/HPVA HP-1-2009; it is differentiated from “structural plywood” (also known as “industrial plywood” or “industrial panels”), which must meet the “bond performance” requirements set forth at paragraph 5.8.6.4 of U.S. Products Standard PS 1-09 for Structural Plywood.

Hardwood and decorative plywood is primarily manufactured as a panel. The most common panel sizes are 1219 × 1829 mm (48 × 72 inches), 1219 × 2438 mm (48 × 96 inches), and 1219 × 3048 mm (48 × 120 inches). However, these panels may be cut-to-size by the manufacturer in accordance with a customer's requirements, or made to other sizes.

A “veneer” is a thin slice of wood, rotary cut, sliced or sawed from a log, bolt or flitch. The face veneer is the exposed veneer of a hardwood and decorative plywood product which is of a superior grade than that of the other exposed veneer of the product (i.e., as opposed to the inner veneers). The face veneer is also either side of the product when the two exposed veneers are of the same grade. The face veneer is also the side of the product that is intended to be exposed for view after installation.

The core of hardwood and decorative plywood consists of the layer or layers of material(s) that are situated between the front and back veneers. The core may be composed of a range of materials, including but not limited to veneers, particleboard, and medium-density fiberboard (MDF).

All hardwood and decorative plywood is included within the definition of subject merchandise regardless whether or not the face and/or back veneers are surface coated. Additionally, the face veneer of hardwood and decorative plywood may be sanded, smoothed or given a “distressed” appearance through such methods as hand-scraping or wire brushing. The face veneer may also be stained (i.e., to achieve a particular color).

Unless subject to a specifically enumerated exclusion detailed below, all hardwood and decorative plywood is included within the definition of subject merchandise, without regard to: Dimension (overall thickness, thickness of face veneer, thickness of back veneer, thickness of core, and thickness of inner veneers; width; and length); wood species used for the face, back and inner veneers (including hardwoods, softwoods or bamboo); core composition; the grade of the face and back veneers; and whether or not surface coated (i.e., “unfinished” or “prefinished”). The face and/or back veneers of the product may be sanded, smoothed, scraped or stained.

Hardwood and decorative plywood is generally manufactured to American National Standard for Hardwood and Decorative Plywood, ANSI/HPVA HP-1-2009. Regardless of whether the product meets the ANSI/HPVA standard, all hardwood and decorative plywood is included within this definition if it meets the physical description set forth therein.

The scope of the investigation excludes the following items: (1) Structural plywood that is manufactured and stamped to meet U.S. Products Standard PS 1-09 for Structural Plywood (including any revisions to that standard or any substantially equivalent international standard intended for structural plywood), including but not limited to the “bond performance” requirements set forth at paragraph 5.8.6.4 of that Standard and the performance criteria detailed at Table 4 through 10 of that Standard; (2) plywood platforms with a face and back ply of cork; (3) multilayered wood flooring, as described in the antidumping duty and countervailing duty orders on Multilayered Wood Flooring from the People's Republic of China, Import Administration, International Trade Administration, U.S. Department of Commerce Investigation Nos. A-570-970 and C-570-971 (published December 8, 2011); (4) plywood further manufactured or further worked aside from sanding, surface coating (i.e., “prefinishing”), scraping or staining (e.g., bent or molded plywood; bent or molded plywood is defined as a flat panel that is purposely further manufactured through whatever means to achieve a shape or design other than a flat plane).

Imports of the subject merchandise are provided for under the following subheadings of the Harmonized Tariff Schedule of the United States (“HTSUS”): 4412.10.0500; 4412.31.0520; 4412.31.0540; 4412.31.0560; 4412.31.2510; 4412.31.2520; 4412.31.4040; 4412.31.4050; 4412.31.4060; 4412.31.4070; 4412.31.5135; 4412.31.5155; 4412.31.5165; 4412.31.5175; 4412.31.6000; 4412.31.9100; 4412.32.0520; 4412.32.0540; 4412.32.0560; 4412.32.2510; 4412.32.2520; 4412.32.3135; 4412.32.3155; 4412.32.3165; 4412.32.3175; 4412.32.3185; 4412.32.5600; 4412.39.1000; 4412.39.3000; 4412.39.4011; 4412.39.4012; 4412.39.4019; 4412.39.4031; 4412.39.4032; 4412.39.4039; 4412.39.4051; 4412.39.4052; 4412.39.4059; 4412.39.4061; 4412.39.4062; 4412.39.4069; 4412.39.5010; 4412.39.5030; 4412.39.5050; 4412.94.1030; 4412.94.1050; 4412.94.3111; 4412.94.3121; 4412.94.3131; 4412.94.3141; 4412.94.3160; 4412.94.3171; 4412.94.4100; 4412.94.6000; 4412.94.7000; 4412.94.8000; 4412.94.9000; 4412.99.0600; 4412.99.1020; 4412.99.1030; 4412.99.1040; 4412.99.3110; 4412.99.3120; 4412.99.3130; 4412.99.3140; 4412.99.3150; 4412.99.3160; 4412.99.3170; 4412.99.4100; 4412.99.5710; 4412.99.6000; 4412.99.7000; 4412.99.8000; and 4412.99.9000.

While HTSUS subheadings are provided for convenience and customs purposes, the written description of the subject merchandise as set forth herein is dispositive.

Footnotes

1.  See Hardwood and Decorative Plywood From the People's Republic of China: Initiation of Antidumping Duty Investigation, 77 FR 65172 (October 25, 2012).