2020-26477. Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Bendix Commercial Vehicle Systems LLCr
-
Start Preamble
AGENCY:
Federal Motor Carrier Safety Administration (FMCSA), DOT.
ACTION:
Notice of application for exemption; request for comments.
SUMMARY:
FMCSA requests public comment on an application for exemption from Bendix Commercial Vehicle Systems (Bendix) to allow its advanced vehicle safety systems, which are equipped with cameras, to be mounted lower in the windshield on commercial motor vehicles than is currently permitted.
DATES:
Comments must be received on or before December 31, 2020.
ADDRESSES:
You may submit comments identified by Docket Number FMCSA-2020-0196 using any of the following methods:
- Federal eRulemaking Portal: Go to http://www.regulations.gov/#!docketDetail;D=FMCSA-2020-0196. Follow the online instructions for submitting comments.
- Mail: Docket Operations, U.S. Department of Transportation, 1200 New Jersey Avenue SE, West Building, Ground Floor, Room W12-140, Washington, DC 20590-0001.
- Hand Delivery or Courier: Dockets Operations, U.S. Department of Transportation, 1200 New Jersey Avenue SE, West Building, Ground Floor, Room W12-140, Washington, DC 20590-0001, between 9 a.m. and 5 p.m., ET, Monday through Friday, except Federal holidays. To be sure someone is there to help you, please call (202) 366-9317 or (202) 366-9826 before visiting Dockets Operations.
- Fax: (202) 493-2251.
FOR FURTHER INFORMATION CONTACT:
Mr. José R. Cestero, Vehicle and Roadside Operations Division, Office of Carrier, Driver, and Vehicle Safety, MC-PSV, (202) 366-5541, Federal Motor Carrier Safety Administration, 1200 New Jersey Avenue SE, Washington, DC 20590-0001. If you have questions on viewing or submitting material to the docket, call Dockets Operations at (202) 366-9826.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
I. Public Participation and Request for Comments
FMCSA encourages you to participate by submitting comments and related materials.
Submitting Comments
If you submit a comment, please include the docket number for this notice (FMCSA 2020-0196), indicate the specific section of this document to which the comment applies, and provide a reason for each suggestion or recommendation. You may submit your comments and material online or by fax, mail, or hand delivery, but please use only one of these means. FMCSA recommends that you include your name and a mailing address, an email address, or a phone number in the body of your document so FMCSA can Start Printed Page 77337contact you if there are questions regarding your submission.
To submit your comment online, go to www.regulations.gov/#!docketDetail;D=FMCSA-2020-0196,, click on the “Comment Now!” button and type your comment into the text box on the following screen. Choose whether you are submitting your comment as an individual or on behalf of a third party and then submit.
If you submit your comments by mail or hand delivery, submit them in an unbound format, no larger than 81/2 by 11 inches, suitable for copying and electronic filing. If you submit comments by mail and would like to know that they reached the facility, please enclose a stamped, self-addressed postcard or envelope.
FMCSA will consider all comments and material received during the comment period.
Viewing Comments and Documents
To view comments, as well as any documents mentioned in this preamble as being available in the docket, go to http://www.regulations.gov/#!docketDetail;D=FMCSA-2020-196 and choose the document to review. If you do not have access to the internet, you may view the docket online by visiting Dockets Operations in Room W12-140 on the ground floor of the DOT West Building, 1200 New Jersey Avenue SE, Washington, DC 20590-0001, between 9 a.m. and 5 p.m., ET, Monday through Friday, except Federal holidays. To be sure someone is there to help you, please call (202) 366-9317 or (202) 366-9826 before visiting Dockets Operations.
Privacy Act
DOT solicits comments from the public to better inform its rulemaking process, in accordance with 5 U.S.C. 553(c). DOT posts these comments, without edit, including any personal information the commenter provides, to www.regulations.gov,, as described in the system of records notice (DOT/ALL 14—Federal Docket Management System), which can be reviewed at www.transportation.gov/privacy.
II. Legal Basis
FMCSA has authority under 49 U.S.C. 31315(b) to grant exemptions from certain parts of the Federal Motor Carrier Safety Regulations (FMCSRs). FMCSA must publish a notice of each exemption request in the Federal Register (49 CFR 381.315(a)). The Agency must provide the public an opportunity to inspect the information relevant to the application, including any safety analyses that have been conducted. The Agency must also provide an opportunity for public comment on the request. The Agency reviews the safety analyses and the public comments and determines whether granting the exemption would likely achieve a level of safety equivalent to or greater than the level that would be achieved by the current regulation (49 CFR 381.305). The decision of the Agency must be published in the Federal Register (49 CFR 381.315(b)). If the Agency denies the request, it must state the reason for doing so. If the decision is to grant the exemption, the notice must specify the person or class of persons receiving the exemption and the regulatory provision or provisions from which an exemption is granted. The notice must specify the effective period of the exemption (up to 5 years) and explain the terms and conditions of the exemption. The exemption may be renewed (49 CFR 381.315(c) and 49 CFR 381.300(b)).
Bendix's Application for Exemption
The Federal Motor Carrier Safety Regulations require devices meeting the definition of “vehicle safety technology” to be mounted (1) not more than 4 inches below the upper edge of the area swept by the windshield wipers, or (2) not more than 7 inches above the lower edge of the area swept by the windshield wipers, and outside the driver's sight lines to the road and highway signs and signals. Bendix has applied for an exemption from 49 CFR 393.60(e)(1) to allow its Bendix camera(s) with safety technologies to be mounted lower in the windshield than is currently permitted. A copy of the exemption application is included in the docket referenced at the beginning of this notice.
Request for Comments
In accordance with 49 U.S.C. 31315(b)(6), FMCSA requests public comment from all interested persons on Bendix's application for an exemption from 49 CFR 393.60(e)(1). All comments received before the close of business on the comment closing date indicated at the beginning of this notice will be considered and will be available for examination in the docket at the location listed under the ADDRESSES section of this notice. Comments received after the comment closing date will be filed in the public docket and will be considered to the extent practicable. In addition to late comments, FMCSA will also continue to file, in the public docket, relevant information that becomes available after the comment closing date. Interested persons should continue to examine the public docket for new material.
Start SignatureLarry W. Minor,
Associate Administrator for Policy.
[FR Doc. 2020-26477 Filed 11-30-20; 8:45 am]
BILLING CODE 4910-EX-P
Document Information
- Published:
- 12/01/2020
- Department:
- Federal Motor Carrier Safety Administration
- Entry Type:
- Notice
- Action:
- Notice of application for exemption; request for comments.
- Document Number:
- 2020-26477
- Dates:
- Comments must be received on or before December 31, 2020.
- Pages:
- 77336-77337 (2 pages)
- Docket Numbers:
- Docket No. FMCSA-2020-0196
- PDF File:
- 2020-26477.pdf
- Supporting Documents:
- » Parts and Accessories Necessary for Safe Operation; Exemption Applications: Bendix Commercial Vehicle Systems, LLC
- » Bendix Commercial Vehicle Systems LLC - Exemption/Rulemaking
- » Parts and Accessories Necessary for Safe Operation: Application for an Exemption from Bendix Commercial Vehicle Systems, LLC