E6-21425. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from September 18, 2006 to October 13, 2006, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the specific PMN number or TME number, must be received on or before January 16, 2007.

ADDRESSES:

Submit your comments, identified by docket identification (ID) no. EPA-HQ-OPPT-2006-0966, by one of the following methods.

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the on-line instructions for submitting comments.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.
• Hand Delivery: OPPT Document Control Office (DCO, EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID number EPA-HQ-OPPT-2006-[insert Docket ID no.]. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone]. Such deliveries are only accepted during the Docket's normal hours of operation, and special arrangements should be made for deliveries of boxed information.

Instructions: Direct your comments to docket ID number EPA-HQ-OPPT-2006-0966;. EPA's policy is that all comments received will be included in the public docket without change and may be made available online at http://www.regulations.gov, including any personal information provided, unless the comment includes information claimed to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. Do not submit information that you consider to be CBI or otherwise protected through regulations.gov or e-mail. The regulations.gov website is an “anonymous access” systems, which means EPA will not know your identity or contact information unless you provide it in the body of your comment. If you send an e-mail comment directly to EPA without going through regulations.gov your e-mail address will be automatically captured and included as part of the comment that is placed in the public docket and made available on the Internet. If you submit an electronic comment, EPA recommends that you include your name and other contact information in the body of your comment and with any disk or CD ROM you submit. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment. Electronic files should avoid the use of special characters, any form of encryption, and be free of any defects or viruses.

Docket: All documents in the docket are listed in the regulations.gov index. Although listed in the index, some information is not publicly available, e.g., CBI or other information whose disclosure is restricted by statute. Certain other material, such as copyrighted material, will be publicly available only in hard copy. Publicly available docket materials are available electronically at http://www.regulations.gov, or, if only available in hard copy, at the OPPT Docket, EPA Docket Center (EPA/DC). The EPA/DC suffered structural damage due to flooding in June 2006. Although the EPA/DC is continuing operations, there will be temporary changes to the EPA/DC during the clean-up. The EPA/DC Public Reading Room, which was temporarily closed due to flooding, has been relocated in the EPA Headquarters Library, Infoterra Room (Room Number 3334) in the EPA West Building, located at 1301 Constitution Ave., NW., Washington, DC. The EPA/DC Public Reading Room is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The telephone number of the EPA/DC Public Reading Room is [phone], and the telephone number for the OPPT Docket is [phone]. EPA visitors are required to show photographic identification and sign the EPA visitor log. Visitors to the EPA/DC Public Reading Room will be provided with an EPA/DC badge that must be visible at all times while in the EPA Building and returned to the guard upon departure. In addition, security personnel will escort visitors to and from the new EPA/DC Public Reading Room location. Up-to-date information about the EPA/DC is on the EPA web site at http://www.epa.gov/​epahome/​dockets.htm.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. What Should I Consider as I Prepare My Comments for EPA?

1. Submitting CBI. Do not submit this information to EPA through regulations.gov or e-mail. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD ROM that you mail to EPA, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is claimed CBI). In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When submitting comments, remember to:

i. Identify the document by docket number and other identifying information (subject heading, Federal Register date and page number).

ii. Follow directions - The agency may ask you to respond to specific questions or organize comments by referencing a Code of Federal Regulations (CFR) part or section number.

iii. Explain why you agree or disagree; suggest alternatives and substitute language for your requested changes.

iv. Describe any assumptions and provide any technical information and/or data that you used.

v. If you estimate potential costs or burdens, explain how you arrived at the estimate.

vi. Provide specific examples to illustrate your concerns, and suggested alternatives.

vii. Explain your views as clearly as possible, avoiding the use of profanity or personal threats.

viii. Make sure to submit your comments by the comment period deadline identified.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from September 18, 2006 to October 13, 2006, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 75 Premanufacture Notices Received From: 09/18/06 to 10/13/06

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-06-0805	09/18/06	12/16/06	Cytec Industries Inc.	(G) Mining chemical reagent	(G) Modified thiocarbamate
P-06-0806	09/18/06	12/16/06	Clearwater International LLC d/b/a Weatherford Engineered Chemistry	(S) Flow enhancer and fines migration reduction of post slick water jobs (enhanced oil recovery); flow enhancer and fines migration reduction of post fracturing jobs (enhanced oil recovery); formation treatment of post stimulation jobs (enhanced oil recovery)	(G) Phosphate ester alkyl pyridine salt
P-06-0807	09/19/06	12/17/06	CBI	(G) Textile colorant	(G) Substituted phenylazo naphthalenesulfonic acid
P-06-0808	09/18/06	12/16/06	Xerox Corporation	(G) Open, non-dispersive use as a constituent in solid, crayon like inks for computer printers	(G) Polyamide resin
P-06-0809	09/20/06	12/18/06	CBI	(G) Radiation cured coating	(G) Amine modified acrylic ester
P-06-0810	09/20/06	12/18/06	Nation Ford Chemical Company	(S) Destructive use as chemical intermediate	(S) 2,5-cyclohexadiene-1,4-dione, 2,5-dichloro-3,6-bis[(9-ethyl-9h-carbazol-3-yl)amino]-
P-06-0811	09/20/06	12/18/06	CBI	(S) Monomer for the synthesis of specialty polymer	(G) Substituted bicyclic olefin
P-06-0812	09/20/06	12/18/06	CBI	(G) Surface treatment agent	(G) Fluoropolyether derivative fluoronated polyurethane resin
P-06-0813	09/19/06	12/17/06	CBI	(G) Additive for pigment dispersion	(G) Poly (oxyalkanediyl) ,.alpha.,.alpha,′-carbomonocycledicarbonyl bis (.omega.-alkyloxy-)
P-06-0814	09/19/06	12/17/06	CBI	(G) Additive for pigment dispersion	(G) Poly (oxyalkanediyl) , .alpha.,.alpha,′.alpha.′′-carbomonocycletricarbonyl tris (.omega.-alkyloxy-)
P-06-0815	09/19/06	12/17/06	Nyco Minerals, Inc.	(S) Filter for thermoplastic resins	(S) 1,2-ethanediamine, N-[3-(trimethoxysilyl)propyl]-, hydrolysis products with wollastonite (ca(si03))
P-06-0816	09/21/06	12/19/06	CBI	(G) Hydrophobic surface active agent for cellulosic substrates and similar materials	(G) Modified reaction products of alkyl alcohol, halogenated alkane, substituted epoxide, and amino compound
P-06-0817	09/22/06	12/20/06	CBI	(S) Fluorescent brightener for use in cellulosic paper applications	(G) Substituted benzene sulfonic acid, salt reaction product with phenylamine and amino alcohol and substituted propaneamide compounds with amino alcohol
P-06-0818	09/22/06	12/20/06	CBI	(G) Polymer for injection molding and extrusion	(G) Benzoic acid, 2,2′-[substituted]bis-, dimethyl ester, polymer with 1,4-benzenediol, (substituted) 1,4-benzenediol and 4,4′-(1-substituted)bis[phenol]
P-06-0819	09/22/06	12/20/06	CBI	(G) Polymer for injection molding and extrusion	(G) Benzoic acid, 2,2′-[substituted]bis-, dimethyl ester, polymer with 1,4-benzenediol, and 4,4′ (substituted) bis[phenol]
P-06-0820	09/22/06	12/20/06	CBI	(G) Contained use in energy production	(G) Trisubstituted triazine
P-06-0821	09/22/06	12/20/06	CBI	(S) Reactive diluent in ultra violet formulations	(G) Alkoxylated pentaerythritol acrylate
P-06-0822	09/22/06	12/20/06	CBI	(G) Acrylic binder	(G) Acrylic copolymer
P-06-0823	09/25/06	12/23/06	CBI	(S) Aqueous dispersion of polymer for leather finishing	(G) Alkanedioic acid, polymer with alkanediol, carbocycledicarboxylic acid, carbocycle-isocyanato-(isocyanatoalkyl)-trialkyl-, carbocycle alkylenebis[isocyanato-, alkanoic acid, hydroxy-(hydroxyalkyl)-alkyl-, trialkylamine, and 1,2-alkyldiamine
P-06-0824	09/25/06	12/23/06	CBI	(S) Aqueous dispersion of polymer for leather finishing	(G) 2-propenoic acid, polymer with cyanoalkene, alkenoic acid alkyl ester, alkylalkenamide, methylolmethacrylamide, and an alkenyl benzene
P-06-0825	09/25/06	12/23/06	CBI	(S) Aqueous dispersion of polymer for leather finishing	(G) Oxepanone, polymer with dialkyl-alkanediol, alkyl-(hydroxyaalkyl)-alkanediol, carbocycle, isocyanato-(isocyanatoalkyll)-trialkyl-, alkanoic acid, hydroxy-(hydroxyalkyl)-alkyl-, alkylamine, N,N-dialkyl-, aminoalkyl-trialkylcarbocyclicamine, and alkyldiamine
P-06-0826	09/25/06	12/23/06	CBI	(G) Stabilizer for emulsion polymers	(G) Seed-oil based surfactant
P-06-0827	09/26/06	12/24/06	CBI	(G) Fuel additive	(G) Heterocycle amine, N-heterocycle, monoammonium salt
P-06-0828	09/27/06	12/25/06	CBI	(G) Dispersive use in cooling water treatment	(G) Polyacrylate terpolymer salt
P-06-0829	09/27/06	12/25/06	Archer Daniels Midland Company	(G) Petrochemical replacement	(S) Fatty acids, canola-oil, me esters
P-06-0830	09/27/06	12/25/06	Archer Daniels Midland Company	(G) Petrochemical replacement	(S) Fatty acids, rape-oil, me esters
P-06-0831	09/27/06	12/25/06	Archer Daniels Midland Company	(G) Petrochemical replacement	(S) Fatty acids, corn-oil, me esters
P-06-0832	09/27/06	12/25/06	Archer Daniels Midland Company	(G) Petrochemical replacement	(S) Fatty acids, palm-oil, me esters
P-06-0833	09/27/06	12/25/06	Archer Daniels Midland Company	(G) Petrochemical replacement	(S) Fatty acids, peanut-oil, me esters
P-06-0834	09/27/06	12/25/06	Archer Daniels Midland Company	(G) Petrochemical replacement	(S) Fatty acids, linseed-oil, me esters
P-06-0835	09/28/06	12/26/06	CBI	(G) Additive, open, non-dispersive use	(G) Polyester urethane copolymer
P-06-0836	09/28/06	12/26/06	CBI	(G) Additive, open, non-dispersive use	(G) Polyester urethane copolymer
P-06-0837	09/28/06	12/26/06	CBI	(G) Additive, open, non-dispersive use	(G) Polyester urethane copolymer
P-06-0838	09/28/06	12/26/06	CBI	(G) Additive, open, non-dispersive use	(G) Polyester urethane copolymer
P-06-0839	09/29/06	12/27/06	CBI	(G) Flame retardants for plastics and resins	(G) Phenoxyphosphazene oligomer
P-07-0001	10/02/06	12/30/06	Mane, USA	(G) Perfumery ingredient	(G) Cilandrane
P-07-0002	10/03/06	12/31/06	CBI	(G) Film forming aid for paint formulations; film forming aid for ink formulations	(G) Fatty acids, C16-C18 and C18 unsaturated, esters with mixed diols and triols
P-07-0003	10/03/06	12/31/06	CBI	(G) Film forming aid for paint formulations; film forming aid for ink formulations	(G) Mixed polyol - glycerol fatty acid ester
P-07-0004	10/03/06	12/31/06	CBI	(G) Film forming aid for paint formulations; film forming aid for ink formulations	(G) Mixed polyol - glycerol fatty acid ester
P-07-0005	10/03/06	12/31/06	CBI	(G) Film forming aid for paint formulations; film forming aid for ink formulations	(G) Mixed polyol - glycerol fatty acid ester
P-07-0006	10/03/06	12/31/06	CBI	(G) Film forming aid for paint formulations; film forming aid for ink formulations	(G) Mixed polyol - glycerol fatty acid ester
P-07-0007	10/03/06	12/31/06	CBI	(G) Film forming aid for paint formulations; film forming aid for ink formulations	(G) Mixed polyol - glycerol fatty acid ester
P-07-0008	10/02/06	12/30/06	Ashland Inc., Environmental Health and Safety	(G) Adhesive	(G) Benzene, 1,1′-methylenebis[4-isocyanato-, polymer with oxirane, methyl-, polymer with oxirane, ether with 1,2-propanediol; poly[oxy(methyl-1,2-ethanediyl)], .alpha., .alpha.′,.alpha.′′-1,2,3-propanetriyltris[.omega.-hydroxy-; hexanedioic acid, polymer with 2,2-dimethyl-1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, 1,6-hexanediol and 2,2′-oxybis[ethanol]; hydrocarbons, C9-unsaturated., polymers and phenol; and krasol
P-07-0009	10/04/06	01/01/07	CBI	(S) Polyurethane coating	(G) Aqueous polyurethane dispersion
P-07-0010	10/04/06	01/01/07	CBI	(G) Additive, open, non-dispersive use	(G) Styrene-maleic anhydride copolymer, reaction products with polyether, salt with alkanolamin
P-07-0011	10/04/06	01/01/07	CBI	(G) Antioxidant	(G) Alkylated phenol
P-07-0012	10/04/06	01/01/07	CBI	(S) Resin for inks, coatings and adhesives	(G) Ethanol capped polyether polyurethane
P-07-0013	10/05/06	01/02/07	CBI	(G) Thermoplastic resin processing aid for rubber manufacture	(G) Alkylphenol novolak modified with amine and epoxy
P-07-0014	10/05/06	01/02/07	CBI	(G) Radiation-curable wood, paper and metal coatings, such as wood varnishes, overprint varnishes for paper, and metal coatings	(G) Polyester polyurethane acrylate oligomer
P-07-0015	10/05/06	01/02/07	CBI	(S) Reactive dye for cellulosic fibers	(G) Substituted naphthalenedisulfonic acid, substituted amino azo]-, sodium salt (same generic name for both isomers)
P-07-0016	10/06/06	01/03/07	Croda Inc.	(G) Fabric care softening agent	(G) Hydrolyzed wheat silicone copolymer
P-07-0017	10/06/06	01/03/07	CBI	(G) Siloxane parts of this new material have water repellent effect and hydroxy or alkoxy group of this new material reacts with surface of frame retardant materials to make water repellent coating	(G) Aminoalkoxysiloxane, acetates (salts)
P-07-0018	10/06/06	01/03/07	Ashland Inc., Environmental Health and Safety	(G) Fiberglass reinforced boat hulls	(G) 1,3-propanediol, 2,2-dimethyl-, polymer with cycloalkyl diisocyanate, 2,2-bis[(2-propenyloxy)methyl]-1-butanol-blocked
P-07-0019	10/06/06	01/03/07	Ashland Inc., Environmental Health and Safety	(G) Fiberglass reinforced boat hulls	(G) 1,2-ethanediol, polymer with cycloalkyl diisocyanate, 2,2-bis[(2-propenyloxy)methyl]-1-butanol-blocked
P-07-0020	10/06/06	01/03/07	Ashland Inc., Environmental Health and Safety	(G) Fiberglass reinforced boat hulls	(G) Poly(oxy-1,2-ethanediyl), .alpha.-hydro-.omega.-hydroxy-, polymer with cycloalkyl diisocyanate, 2,2′-bis[(2-propenyloxy)methyl]-1-butanol-blocked
P-07-0021	10/10/06	01/07/07	CIBA Specialty Chemicals Corporation	(S) Flame retardant for polymers	(G) Phenol, 2,4-bis(1,1-branched alkyl)-, phosphate (3:1)
P-07-0022	10/10/06	01/07/07	CBI	(S) Polyurethane coating	(G) Aqueous polyurethane dispersion
P-07-0023	10/10/06	01/07/07	CBI	(S) Polyurethane coating	(G) Aqueous polyurethane dispersion
P-07-0024	10/10/06	01/07/07	CBI	(S) Emulsifier for oilfield application	(G) Alkylamine ethoxylated
P-07-0025	10/10/06	01/07/07	CBI	(G) Contained use in energy production	(G) Alkyl ether trialkyl quaternary ammonium compound
P-07-0026	10/10/06	01/07/07	CBI	(G) Contained use in energy production	(G) Alkyl ether trialkyl quaternary ammonium compound
P-07-0027	10/11/06	01/08/07	CBI	(S) A component in ultraviolet -, visible light and electron beam curable formulations	(G) Dicarboxylic based acid, polymer with a dicarboxylate, 2-ethyl-2-(hydroxymethyl)-1,3-propanediol and 2-methyl-1,3-propanediol, 2-propenoate
P-07-0028	10/12/06	01/09/07	CBI	(G) Open, non-dispersive (resin)	(G) Diphenolmethyl based polymer resin
P-07-0029	10/13/06	01/10/07	CBI	(S) Electrodeposition coating for metallic substrates	(G) Amine functional epoxy based resin salted with an organic acid and grafted with anhydride
P-07-0030	10/13/06	01/10/07	CBI	(S) Electrodeposition coating for metallic substrates	(G) Amine functional epoxy based resin salted with an organic acid and grafted with anhydride
P-07-0031	10/13/06	01/10/07	CBI	(S) Electrodeposition coating for metallic substrates	(G) Amine functional epoxy based resin salted with an organic acid and grafted with anhydride
P-07-0032	10/13/06	01/10/07	CBI	(S) Electrodeposition coating for metallic substrates	(G) Amine functional epoxy based resin salted with an organic acid and grafted with anhydride
P-07-0033	10/13/06	01/10/07	CBI	(S) Electrodeposition coating for metallic substrates	(G) Amine functional epoxy based resin salted with an organic acid and grafted with anhydride
P-07-0034	10/13/06	01/10/07	CBI	(S) Electrodeposition coating for metallic substrates	(G) Amine functional epoxy based resin salted with an organic acid and grafted with anhydride
P-07-0035	10/12/06	01/09/07	CBI	(G) Polymeric binder	(G) Methacrylate copolymer
P-07-0036	10/12/06	01/09/07	CBI	(G) Polymeric binder	(G) Methacrylate copolymer
P-07-0037	10/13/06	01/10/07	Piedmont Chemical Industries I, LLC	(S) Binder resin for polyester fabric knit and nonwoven; binder resin for mattress ticking polyester/polypropylene knit; binder resin for nylon strapping	(S) 1,3-benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,3-dihydro-1,3-dioxo-5-isobenzofurancarboxylic acid, dimethyl 1,4-benzenedicarboxylate, 1,2-ethanediol and 2,2′-oxybis[ethanol], ammonium salt
P-07-0038	10/13/06	01/10/07	Piedmont Chemical Industries I, LLC	(S) Binder resin for polyester fabric knit and nonwoven; binder resin for mattress ticking polyester/polypropylene knit; binder resin for nylon strapping	(S) 1,3-benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,3-dihydro-1,3-dioxo-5-isobenzofurancarboxylic acid, 2,2′-oxybis[ethanol] and 1,3-propanediol, ammonium salt
P-07-0039	10/13/06	01/10/07	Piedmont Chemical Industries I, LLC	(S) Binder resin for polyester fabric knit and nonwoven; binder resin for mattress ticking polyester/polypropylene knit; binder resin for nylon strapping	(S) 1,3-benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,4-butanediol, 1,3-dihydro-1,3-dioxo-5-isobenzofurancarboxylic acid, dimethyl 1,4-benzenedicarboxylate and 2,2′-oxybis[ethanol], ammonium salt
P-07-0040	10/13/06	01/10/07	Piedmont Chemical Industries I, LLC	(S) Binder resin for polyester fabric knit and nonwoven; binder resin for mattress ticking polyester/polypropylene knit; binder resin for nylon strapping	(S) 2,6-naphthalenedicarboxylic acid, dimethyl ester, polymer with 1,3-benzenedicarboxylic acid, 1,4-benzenedicarboxylic acid, 1,3-dihydro-1,3-dioxo-5-isobenzofurancarboxylic acid, 1,2-ethanediol and 2,2′-oxybis[ethanol], ammonium salt

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 19 Notices of Commencement From: 09/18/06 to 10/13/06

Case No.	Received Date	Commencement Notice End Date	Chemical
P-03-0837	09/21/06	09/07/06	(G) Aliphatic polyisocyanate
P-05-0048	09/18/06	02/28/05	(G) Phthalocyanine compound
P-05-0484	04/07/06	03/09/06	(G) Polyoxyethylene polyxoxypropylene polymer, reaction with cyclohexylmethane diisocyanate and polyoxyphenyl derivative
P-05-0551	04/07/06	03/09/06	(G) Polyalkylene glycol alkyl ether, reaction products with allyl glycidyl ether
P-05-0694	04/07/06	03/09/06	(G) Polyalkylene glycol aryl ether, reaction products with formaldehyde
P-06-0092	04/07/06	03/09/06	(G) Oxirane,methyl-, polymer with oxirane, fatty acid alkyl ethers
P-06-0176	09/25/06	09/05/06	(G) Acrylate ester
P-06-0196	09/26/06	08/01/06	(G) Tdi prepolymer based on hybrid caprolactone polyol
P-06-0200	09/21/06	09/12/06	(G) Hydroxy carboxylic acid amide, N,N-dialkyl derivates
P-06-0272	09/27/06	09/05/06	(G) Alkylenedicarboxylic dichloride, polymer with dihydroxybenzene
P-06-0288	09/27/06	09/18/06	(G) Hydroxylated diester of a triamine
P-06-0366	09/18/06	09/08/06	(G) Isocyanate functional polyester polyether urethane polymer
P-06-0448	09/18/06	09/07/06	(G) Fatty acid salt of alkyldiamine
P-06-0463	08/17/06	07/29/06	(S) Borate(1-), bis [ethanedioato (2-)- .kappa. 01, .kappa. 02] -lithium, (t-4)-
P-06-0535	09/21/06	08/22/06	(G) Ester urethane
P-06-0539	09/19/06	08/22/06	(G) Methyl propylhexanol
P-06-0543	09/19/06	08/22/06	(G) Methyl propylhexanol
P-06-0596	09/15/06	09/07/06	(S) 1h-indene, 2,3,3a,4,5,7a-hexahydro-1,1,2,3,3-pentamethyl-6-(2-propenyl)- 2h-indeno[4,5-b]furan, decahydro-2,6,6,7,8,8-hexamethyl-
P-06-0606	09/27/06	09/13/06	(S) 1-propanamine, 3-(triethoxysilyl)-, reaction products with boehmite (al(oh)o)

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: December 7, 2006.

Bernice Mudd,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.