2020-27620. Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes  

  • Start Preamble

    AGENCY:

    Federal Aviation Administration (FAA), Department of Transportation (DOT).

    ACTION:

    Final rule.

    SUMMARY:

    The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes. This AD was prompted by reports that certain nose landing gear (NLG) door attachment bolts are susceptible to hydrogen embrittlement. This AD requires replacing certain NLG door attachment bolts with serviceable bolts, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

    DATES:

    This AD is effective January 21, 2021.

    The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of January 21, 2021.

    ADDRESSES:

    For material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this IBR material on the EASA website at https://ad.easa.europa.eu. You may view this IBR material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0840.

    Examining the AD Docket

    You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-Start Printed Page 813840840; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Shahram Daneshmandi, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206 231 3220; email Shahram. Daneshmandi@faa.gov.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Discussion

    The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2020-0149, dated July 7, 2020 (EASA AD 2020-0149) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes.

    The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to all Saab AB, Support and Services Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes. The NPRM published in the Federal Register on September 15, 2020 (85 FR 57168). The NPRM was prompted by reports that certain NLG door attachment bolts are susceptible to hydrogen embrittlement. The NPRM proposed to require replacing certain NLG door attachment bolts with serviceable bolts, as specified in an EASA AD.

    The FAA is issuing this AD to address NLG door attachment bolts that were incorrectly manufactured and are susceptible to hydrogen embrittlement, decreasing the mechanical characteristics. This condition could lead to failure of the affected parts, which would impair the link between the NLG and NLG door and could prevent the extension or retraction of the NLG, and cause consequent damage to the airplane and possible loss of control during landing. See the MCAI for additional background information.

    Comments

    The FAA gave the public the opportunity to participate in developing this final rule. The FAA received no comments on the NPRM or on the determination of the cost to the public.

    Conclusion

    The FAA reviewed the relevant data and determined that air safety and the public interest require adopting this final rule as proposed, except for minor editorial changes. The FAA has determined that these minor changes:

    • Are consistent with the intent that was proposed in the NPRM for addressing the unsafe condition; and
    • Do not add any additional burden upon the public than was already proposed in the NPRM.

    Related Service Information Under 1 CFR Part 51

    EASA AD 2020-0149 describes procedures for identifying and replacing certain NLG door attachment bolts with serviceable bolts. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

    Costs of Compliance

    The FAA estimates that this AD affects 103 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

    Estimated Costs for Required Actions *

    Labor costParts costCost per productCost on U.S. operators
    2 work-hours × $85 per hour = $170* $* $170* $17,510
    * The FAA has received no definitive data that would enable the FAA to provide parts cost estimates for the bolt replacement specified in this AD.

    According to the manufacturer, some or all of the costs of this AD may be covered under warranty, thereby reducing the cost impact on affected individuals. The FAA does not control warranty coverage for affected individuals. As a result, the FAA has included all known costs in the cost estimate.

    Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

    The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

    Regulatory Findings

    This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

    For the reasons discussed above, I certify that this AD:

    (1) Is not a “significant regulatory action” under Executive Order 12866,

    (2) Will not affect intrastate aviation in Alaska, and

    (3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

    Start List of Subjects

    List of Subjects in 14 CFR Part 39

    • Air transportation
    • Aircraft
    • Aviation safety
    • Incorporation by reference
    • Safety
    End List of Subjects

    Adoption of the Amendment

    Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

    Start Part Start Printed Page 81385

    PART 39—AIRWORTHINESS DIRECTIVES

    End Part Start Amendment Part

    1. The authority citation for part 39 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 49 U.S.C. 106(g), 40113, 44701.

    End Authority
    [Amended]
    Start Amendment Part

    2. The FAA amends § 39.13 by adding the following new airworthiness directive:

    End Amendment Part

    2020-25-02 Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics): Amendment 39-21344; Docket No. FAA-2020-0840; Project Identifier MCAI-2020-00907-T.

    (a) Effective Date

    This airworthiness directive (AD) is effective January 21, 2021.

    (b) Affected Airworthiness Directives (ADs)

    None.

    (c) Applicability

    This AD applies to all Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Model 340A (SAAB/SF340A) and SAAB 340B airplanes; and Model SAAB 2000 airplanes, certificated in any category.

    (d) Subject

    Air Transport Association (ATA) of America Code 32, Landing Gear.

    (e) Reason

    This AD was prompted by reports that certain nose landing gear (NLG) door attachment bolts are susceptible to hydrogen embrittlement. The FAA is issuing this AD to address NLG door attachment bolts that were incorrectly manufactured and are susceptible to hydrogen embrittlement, decreasing the mechanical characteristics. This condition could lead to failure of the affected parts, which would impair the link between the NLG and NLG door and could prevent the extension or retraction of the NLG, and cause consequent damage to the airplane and possible loss of control during landing.

    (f) Compliance

    Comply with this AD within the compliance times specified, unless already done.

    (g) Requirements

    Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2020-0149, dated July 7, 2020 (EASA AD 2020-0149).

    (h) Exceptions to EASA AD 2020-0149

    (1) Where EASA AD 2020-0149 refers to its effective date, this AD requires using the effective date of this AD.

    (2) The “Remarks” section of EASA AD 2020-0149 does not apply to this AD.

    (i) Other FAA AD Provisions

    The following provisions also apply to this AD:

    (1) Alternative Methods of Compliance (AMOCs): The Manager, Large Aircraft Section, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the Large Aircraft Section, International Validation Branch, send it to the attention of the person identified in paragraph (j) of this AD. Information may be emailed to: 9-AVS-AIR-730-AMOC@faa.gov. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

    (2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, Large Aircraft Section, International Validation Branch, FAA; or EASA; or Saab AB, Support and Services' EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

    (j) Related Information

    For more information about this AD, contact Shahram Daneshmandi, Aerospace Engineer, Large Aircraft Section, International Validation Branch, FAA, 2200 South 216th St., Des Moines, WA 98198; telephone and fax 206-231-3220; email Shahram.Daneshmandi@faa.gov.

    (k) Material Incorporated by Reference

    (1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

    (2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

    (i) European Union Aviation Safety Agency (EASA) AD 2020-0149, dated July 7, 2020.

    (ii) [Reserved].

    (3) For EASA AD 2020-0149, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.

    (4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-0840.

    (5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@nara.gov, or go to: https://www.archives.gov/​federal-register/​cfr/​ibr-locations.html.

    Start Signature

    Issued on November 23, 2020.

    Lance T. Gant,

    Director, Compliance & Airworthiness Division, Aircraft Certification Service.

    End Signature End Supplemental Information

    [FR Doc. 2020-27620 Filed 12-15-20; 8:45 am]

    BILLING CODE 4910-13-P

Document Information

Effective Date:
1/21/2021
Published:
12/16/2020
Department:
Federal Aviation Administration
Entry Type:
Rule
Action:
Final rule.
Document Number:
2020-27620
Dates:
This AD is effective January 21, 2021.
Pages:
81383-81385 (3 pages)
Docket Numbers:
Docket No. FAA-2020-0840, Project Identifier MCAI-2020-00907-T, Amendment 39-21344, AD 2020-25-02
RINs:
2120-AA64: Airworthiness Directives
RIN Links:
https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives
Topics:
Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety
PDF File:
2020-27620.Pdf
Supporting Documents:
» U.S. DOT/FAA - Supplemental AD Documents
» Airworthiness Directives: Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
» Supporting AD Document
» Airworthiness Directives: Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
CFR: (1)
14 CFR 39.13