01-30540. Federal Acquisition Regulation; Prompt Payment and the Recovery of Overpayment  

  • Start Preamble

    AGENCIES:

    Department of Defense (DoD), General Services Administration (GSA), and National Aeronautics and Space Administration (NASA).

    ACTION:

    Final rule.

    SUMMARY:

    The Civilian Agency Acquisition Council and the Defense Acquisition Regulations Council (Councils) have agreed on a final rule Start Printed Page 65354amending the Federal Acquisition Regulation (FAR) to reflect changes to the Office of Management and Budget (OMB) prompt payment requirements, to simplify and clarify the prompt payment coverage currently in the FAR, to require the contractor to notify the contracting officer if the contractor becomes aware of an overpayment, and to write all new and revised text using plain language.

    DATES:

    Effective Date: February 19, 2002.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    The FAR Secretariat, Room 4035, GS Building, Washington, DC, 20405, (202) 501-4755, for information pertaining to status or publication schedules. For clarification of content, contact Mr. Jeremy Olson at (202) 501-3221. Please cite FAC 2001-02, FAR case 1999-023.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    A. Background

    DoD, GSA, and NASA published a proposed rule in the Federal Register at 65 FR 52244 on August 28, 2000. The proposed rule—

    • Conformed the prompt payment coverage to OMB regulations. The rule revises the FAR to conform the prompt payment coverage with an OMB final rule published in the Federal Register at 65 FR 52580 on September 29, 1999.
    • Implemented a General Accounting Office (GAO) recommendation. In July 1999, the GAO published a report (GAO/NSIAD-99-131) entitled Greater Attention Needed to Identify and Recover Overpayments. After examining the process for identifying and collecting overpayments, GAO concluded in their report that “Under current law, there is no requirement for contractors who have been overpaid to notify the Government of overpayments or to return overpayments prior to the Government issuing a demand letter” (i.e., formal notification to the contractor to pay money owed to the Government). One of the recommendations of the report was that DoD require contractors to promptly notify the Government of overpayments made to them. Accordingly, the FAR rule adds a paragraph to the prompt payment clauses that requires the contractor to notify the contracting officer if the contractor becomes aware of an overpayment.
    • Wrote all new and revised text using plain language.

    Eleven respondents submitted public comments to the proposed rule. One of the respondents recommended that the requirement to notify the contracting officer of a duplicate payment or overpayment not be limited to just invoice payments, and expand the coverage to include financing payments (e.g., progress payments based on cost). The Councils agree with this comment and have opened a new FAR case (reference FAR case 2001-005), to consider adding the requirement to notify the contracting officer of a duplicate payment or overpayment to the financing payment clauses (e.g., FAR 52.216-7, Allowable Cost and Payment; 52.216-13, Allowable Cost and Payment-Facilities; 52.232-7, Payments under Time-and-Material and Labor-Hour Contracts; and 52.232-16, Progress Payments).

    The Councils considered all comments when developing the final rule, which differs from the proposed rule by—

    • Requiring that the contractor include an invoice number on the invoice, to be consistent with the OMB regulations at 5 CFR 1316.9(b);
    • Clarifying that, when a proper invoice is rejected in error, the payment office will use the original date the invoice was received for the purposes of computing any interest penalties that may be due the contractor; and
    • Making several editorial changes.

    This is not a significant regulatory action, and therefore, was not subject to review under Section 6(b) of Executive Order 12866, Regulatory Planning and Review, dated September 30, 1993. This rule is not a major rule under 5 U.S.C. 804.

    B. Regulatory Flexibility Act

    The Department of Defense, the General Services Administration, and the National Aeronautics and Space Administration certify that this final rule will not have a significant economic impact on a substantial number of small entities within the meaning of the Regulatory Flexibility Act, 5 U.S.C. 601, et seq. since the changes are primarily editorial in nature. For example, FAR 32.905(b) adds the stipulation that a proper invoice must include the taxpayer identification number (TIN) and electronic funds transfer (EFT) banking information, if required by agency procedures. This is not new policy as the current FAR authorizes agencies to collect TIN (FAR 4.203) and EFT banking information (FAR 32.1109) in any manner they choose, such as requiring it to be provided on each invoice.

    C. Paperwork Reduction Act

    The Paperwork Reduction Act (Pub. L. 104-13) applies because this final rule contains information collection requirements. The final rule requires contractors to notify the contracting officer if the contractor becomes aware that the Government has overpaid on an invoice payment. The FAR Secretariat submitted a request for approval of a revised information collection, and the collection was approved by the Office of Management and Budget under OMB Control Number 9000-0070.

    Start List of Subjects

    List of Subjects in 48 CFR Parts 2, 32, and 52

    • Government procurement
    End List of Subjects Start Signature

    Dated: December 15, 2001.

    Al Matera,

    Director, Acquisition Policy Division.

    End Signature Start Amendment Part

    Therefore, DoD, GSA, and NASA amend 48 CFR parts 2, 32, and 52 as set forth below:

    End Amendment Part Start Amendment Part

    1. The authority citation for 48 CFR parts 2, 32, and 52 continues to read as follows:

    End Amendment Part Start Authority

    Authority: 40 U.S.C. 486(c); 10 U.S.C. chapter 137; and 42 U.S.C. 2473(c).

    End Authority Start Part

    PART 2—DEFINITIONS OF WORDS AND TERMS

    End Part Start Amendment Part

    2. Amend section 2.101 by revising the definition “Proper invoice”; and adding, in alphabetical order, the definition “Receiving report” to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Proper invoice means an invoice that meets the minimum standards specified in 32.905(b).

    * * * * *

    Receiving report means written evidence that indicates Government acceptance of supplies delivered or services performed (see subpart 46.6). Receiving reports must meet the requirements of 32.905(c).

    * * * * *
    Start Part

    PART 15—CONTRACTING BY NEGOTIATION

    [AMENDED]
    End Part Start Amendment Part

    3. Amend 15.407-1(b)(7)(i) by removing “32.902” and adding “32.001” in its place.

    End Amendment Part Start Part

    PART 32—CONTRACT FINANCING

    End Part Start Amendment Part

    4. Amend section 32.001 by adding, in alphabetical order, the definitions “Contract financing payment”, “Designated billing office”, “Designated payment office”, and “Invoice payment” to read as follows:

    End Amendment Part
    Definitions.
    * * * * *

    Contract financing payment means an authorized Government disbursement of Start Printed Page 65355monies to a contractor prior to acceptance of supplies or services by the Government.

    (1) Contract financing payments include—

    (i) Advance payments;

    (ii) Performance-based payments;

    (iii) Commercial advance and interim payments;

    (iv) Progress payments based on cost under the clause at 52.232-16, Progress Payments;

    (v) Progress payments based on a percentage or stage of completion (see 32.102(e)), except those made under the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, or the clause at 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts; and

    (vi) Interim payments under a cost reimbursement contract, except for a cost reimbursement contract for services when Alternate I of the clause at 52.232-25, Prompt Payment, is used.

    (2) Contract financing payments do not include—

    (i) Invoice payments;

    (ii) Payments for partial deliveries; or

    (iii) Lease and rental payments.

    * * * * *

    Designated billing office means the office or person (governmental or nongovernmental) designated in the contract where the contractor first submits invoices and contract financing requests. The contract might designate different offices to receive invoices and contract financing requests. The designated billing office might be—

    (1) The Government disbursing office;

    (2) The contract administration office;

    (3) The office accepting the supplies delivered or services performed by the contractor;

    (4) The contract audit office; or

    (5) A nongovernmental agent.

    Designated payment office means the office designated in the contract to make invoice payments or contract financing payments. Normally, this will be the Government disbursing office.

    * * * * *

    Invoice payment means a Government disbursement of monies to a contractor under a contract or other authorization for supplies or services accepted by the Government.

    (1) Invoice payments include—

    (i) Payments for partial deliveries that have been accepted by the Government;

    (ii) Final cost or fee payments where amounts owed have been settled between the Government and the contractor;

    (iii) For purposes of subpart 32.9 only, all payments made under the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, and the clause at 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts; and

    (iv) Interim payments under a cost-reimbursement contract for services when Alternate I of the clause at 52.232-25, Prompt Payment, is used.

    (2) Invoice payments do not include contract financing payments.

    * * * * *
    Start Amendment Part

    5. Add section 32.007 to read as follows:

    End Amendment Part
    Contract financing payments.

    (a)(1) Unless otherwise prescribed in agency policies and procedures or otherwise specified in paragraph (b) of this section, the due date for making contract financing payments by the designated payment office is the 30th day after the designated billing office receives a proper contract financing request.

    (2) If an audit or other review of a specific financing request is required to ensure compliance with the terms and conditions of the contract, the designated payment office is not compelled to make payment by the specified due date.

    (3) Agency heads may prescribe shorter periods for payment based on contract pricing or administrative considerations. For example, a shorter period may be justified by an agency if the nature and extent of contract financing arrangements are integrated with agency contract pricing policies.

    (4) Agency heads must not prescribe a period shorter than 7 days or longer than 30 days.

    (b) For advance payments, loans, or other arrangements that do not involve recurrent submission of contract financing requests, the designated payment office will make payment in accordance with the applicable contract financing terms or as directed by the contracting officer.

    (c) A proper contract financing request must comply with the terms and conditions specified by the contract. The contractor must correct any defects in requests submitted in the manner specified in the contract or as directed by the contracting officer.

    (d) The designated billing office and designated payment office must annotate each contract financing request with the date their respective offices received the request.

    (e) The Government will not pay an interest penalty to the contractor as a result of delayed contract financing payments.

    Start Amendment Part

    6. Amend section 32.102 by revising paragraph (d) to read as follows:

    End Amendment Part
    Description of contract financing methods.
    * * * * *

    (d) Payments for accepted supplies and services that are only a part of the contract requirements (i.e., partial deliveries) are authorized under 41 U.S.C. 255 and 10 U.S.C. 2307. In accordance with 5 CFR 1315.4(k), agencies must pay for partial delivery of supplies or partial performance of services unless specifically prohibited by the contract. Although payments for partial deliveries generally are treated as a method of payment and not as a method of contract financing, using partial delivery payments can assist contractors to participate in contracts without, or with minimal, contract financing. When appropriate, contract statements of work and pricing arrangements must permit acceptance and payment for discrete portions of the work, as soon as accepted (see 32.906(c)).

    * * * * *
    Start Amendment Part

    7. Amend Subpart 32.9 by—

    End Amendment Part Start Amendment Part

    a. Revising sections 32.900, 32.901, and 32.902;

    End Amendment Part Start Amendment Part

    b. Removing section 32.903;

    End Amendment Part Start Amendment Part

    c. Redesignating sections 32.904, 32.905, and 32.906 as sections 32.903, 32.904, and 32.905, respectively, and revising;

    End Amendment Part Start Amendment Part

    d. Adding section 32.906;

    End Amendment Part Start Amendment Part

    e. Revising sections 32.907, 32.908, and 32.909; and

    End Amendment Part Start Amendment Part

    f. Removing sections 32.907-1 and 32.907-2.

    End Amendment Part Start Amendment Part

    The revised and added text reads as follows:

    End Amendment Part
    Subpart 32.9—Prompt Payment
    32.900
    Scope of subpart.
    32.901
    Applicability.
    32.902
    Definitions.
    32.903
    Responsibilities.
    32.904
    Determining payment due dates.
    32.905
    Payment documentation and process.
    32.906
    Making payments.
    32.907
    Interest penalties.
    32.908
    Contract clauses.
    32.909
    Contractor inquiries.
    Scope of subpart.

    This subpart prescribes policies, procedures, and clauses for implementing Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

    Applicability.

    (a) This subpart applies to invoice payments on all contracts, except contracts with payment terms and late payment penalties established by other governmental authority (e.g., tariffs).Start Printed Page 65356

    (b) This subpart does not apply to contract financing payments (see definition at 32.001).

    Definitions.

    As used in this subpart—

    Discount for prompt payment means an invoice payment reduction offered by the contractor for payment prior to the due date.

    Mixed invoice means an invoice that contains items with different payment due dates.

    Payment date means the date on which a check for payment is dated or, for an electronic funds transfer (EFT), the settlement date.

    Settlement date, as it applies to electronic funds transfer, means the date on which an electronic funds transfer payment is credited to the contractor's financial institution.

    Responsibilities.

    (a) Agency heads—

    (1) Must establish the policies and procedures necessary to implement this subpart;

    (2) May prescribe additional standards for establishing invoice payment due dates (see 32.904) necessary to support agency programs and foster prompt payment to contractors;

    (3) May adopt different payment procedures in order to accommodate unique circumstances, provided that such procedures are consistent with the policies in this subpart;

    (4) Must inform contractors of points of contact within their cognizant payment offices to enable contractors to obtain status of invoices; and

    (5) May authorize the use of the accelerated payment methods specified at 5 CFR 1315.5.

    (b) When drafting solicitations and contracts, contracting officers must identify for each contract line item number, subline item number, or exhibit line item number—

    (1) The applicable Prompt Payment clauses that apply to each item when the solicitation or contract contains items that will be subject to different payment terms; and

    (2) The applicable Prompt Payment food category (e.g., which item numbers are meat or meat food products, which are perishable agricultural commodities), when the solicitation or contract contains multiple payment terms for various classes of foods and edible products.

    Determining payment due dates.

    (a) General. Agency procedures must ensure that, when specifying due dates, contracting officers give full consideration to the time reasonably required by Government officials to fulfill their administrative responsibilities under the contract.

    (b) Payment due dates. Except as prescribed in paragraphs (c) through (f) of this section, or as authorized in 32.908(a)(2) or (c)(2), the due date for making an invoice payment is as follows:

    (1) The later of the following two events:

    (i) The 30th day after the designated billing office receives a proper invoice from the contractor (except as provided in paragraph (b)(3) of this section).

    (ii) The 30th day after Government acceptance of supplies delivered or services performed.

    (A) For a final invoice, when the payment amount is subject to contract settlement actions, acceptance is deemed to occur on the effective date of the contract settlement.

    (B) For the sole purpose of computing an interest penalty that might be due the contractor—

    (1) Government acceptance is deemed to occur constructively on the 7th day after the contractor delivers supplies or performs services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or contractor compliance with a contract requirement;

    (2) If actual acceptance occurs within the constructive acceptance period, the Government must base the determination of an interest penalty on the actual date of acceptance;

    (3) The constructive acceptance requirement does not compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities; and

    (4) Except for a contract for the purchase of a commercial item, including a brand-name commercial item for authorized resale (e.g., commissary items), the contracting officer may specify a longer period for constructive acceptance in the solicitation and resulting contract, if required to afford the Government a reasonable opportunity to inspect and test the supplies furnished or to evaluate the services performed. The contracting officer must document in the contract file the justification for extending the constructive acceptance period beyond 7 days. Extended acceptance periods must not be a routine agency practice and must be used only when necessary to permit proper Government inspection and testing of the supplies delivered or services performed.

    (2) If the contract does not require submission of an invoice for payment (e.g., periodic lease payments), the contracting officer must specify the due date in the contract.

    (3) If the designated billing office fails to annotate the invoice with the actual date of receipt at the time of receipt, the invoice payment due date is the 30th day after the date of the contractor's invoice, provided the designated billing office receives a proper invoice and there is no disagreement over quantity, quality, or contractor compliance with contract requirements.

    (c) Architect-engineer contracts. (1) The due date for making payments on contracts that contain the clause at 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts, is as follows:

    (i) The due date for work or services completed by the contractor is the later of the following two events:

    (A) The 30th day after the designated billing office receives a proper invoice from the contractor.

    (B) The 30th day after Government acceptance of the work or services completed by the contractor.

    (1) For a final invoice, when the payment amount is subject to contract settlement actions (e.g., release of claims), acceptance is deemed to occur on the effective date of the settlement.

    (2) For the sole purpose of computing an interest penalty that might be due the contractor, Government acceptance is deemed to occur constructively on the 7th day after the contractor completes the work or services in accordance with the terms and conditions of the contract (see also paragraph (c)(2) of this section). If actual acceptance occurs within the constructive acceptance period, the Government must base the determination of an interest penalty on the actual date of acceptance.

    (ii) The due date for progress payments is the 30th day after Government approval of contractor estimates of work or services accomplished. For the sole purpose of computing an interest penalty that might be due the contractor—

    (A) Government approval is deemed to occur constructively on the 7th day after the designated billing office receives the contractor estimates (see also paragraph (c)(2) of this section).

    (B) If actual approval occurs within the constructive approval period, the Government must base the determination of an interest penalty on the actual date of approval.

    (iii) If the designated billing office fails to annotate the invoice or payment request with the actual date of receipt at the time of receipt, the payment due Start Printed Page 65357date is the 30th day after the date of the contractor's invoice or payment request, provided the designated billing office receives a proper invoice or payment request and there is no disagreement over quantity, quality, or contractor compliance with contract requirements.

    (2) The constructive acceptance and constructive approval requirements described in paragraphs (c)(1)(i) and (ii) of this section are conditioned upon receipt of a proper payment request and no disagreement over quantity, quality, contractor compliance with contract requirements, or the requested progress payment amount. These requirements do not compel Government officials to accept work or services, approve contractor estimates, perform contract administration functions, or make payment prior to fulfilling their responsibilities. The contracting officer may specify a longer period for constructive acceptance or constructive approval, if required to afford the Government a reasonable opportunity to inspect and test the supplies furnished or to evaluate the services performed. The contracting officer must document in the contract file the justification for extending the constructive acceptance or approval period beyond 7 days.

    (d) Construction contracts. (1) The due date for making payments on construction contracts is as follows:

    (i) The due date for making progress payments based on contracting officer approval of the estimated amount and value of work or services performed, including payments for reaching milestones in any project, is 14 days after the designated billing office receives a proper payment request.

    (A) If the designated billing office fails to annotate the payment request with the actual date of receipt at the time of receipt, the payment due date is the 14th day after the date of the contractor's payment request, provided the designated billing office receives a proper payment request and there is no disagreement over quantity, quality, or contractor compliance with contract requirements.

    (B) The contracting officer may specify a longer period in the solicitation and resulting contract if required to afford the Government a reasonable opportunity to adequately inspect the work and to determine the adequacy of the contractor's performance under the contract. The contracting officer must document in the contract file the justification for extending the due date beyond 14 days.

    (C) The contracting officer must not approve progress payment requests unless the certification and substantiation of amounts requested are provided as required by the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts.

    (ii) The due date for payment of any amounts retained by the contracting officer in accordance with the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, will be as specified in the contract or, if not specified, 30 days after approval by the contracting officer for release to the contractor. The contracting officer must base the release of retained amounts on the contracting officer's determination that satisfactory progress has been made.

    (iii) The due date for final payments based on completion and acceptance of all work (including any retained amounts), and payments for partial deliveries that have been accepted by the Government (e.g., each separate building, public work, or other division of the contract for which the price is stated separately in the contract) is as follows:

    (A) The later of the following two events:

    (1) The 30th day after the designated billing office receives a proper invoice from the contractor.

    (2) The 30th day after Government acceptance of the work or services completed by the contractor. For a final invoice, when the payment amount is subject to contract settlement actions (e.g., release of contractor claims), acceptance is deemed to occur on the effective date of the contract settlement.

    (B) If the designated billing office fails to annotate the invoice with the actual date of receipt at the time of receipt, the invoice payment due date is the 30th day after the date of the contractor's invoice, provided the designated billing office receives a proper invoice and there is no disagreement over quantity, quality, or contractor compliance with contract requirements.

    (2) For the sole purpose of computing an interest penalty that might be due the contractor for payments described in paragraph (d)(1)(iii) of this section—

    (i) Government acceptance or approval is deemed to occur constructively on the 7th day after the contractor completes the work or services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, contractor compliance with a contract requirement, or the requested amount;

    (ii) If actual acceptance occurs within the constructive acceptance period, the Government must base the determination of an interest penalty on the actual date of acceptance;

    (iii) The constructive acceptance requirement does not compel Government officials to accept work or services, approve contractor estimates, perform contract administration functions, or make payment prior to fulfilling their responsibilities; and

    (iv) The contracting officer may specify a longer period for constructive acceptance or constructive approval in the solicitation and resulting contract, if required to afford the Government a reasonable opportunity to adequately inspect the work and to determine the adequacy of the contractor's performance under the contract. The contracting officer must document in the contract file the justification for extending the constructive acceptance or approval beyond 7 days.

    (3) Construction contracts contain special provisions concerning contractor payments to subcontractors, along with special contractor certification requirements. The Office of Management and Budget has determined that these certifications must not be construed as final acceptance of the subcontractor's performance. The certification in 52.232-5(c) implements this determination; however, certificates are still acceptable if the contractor deletes paragraph (c)(4) of 52.232-5 from the certificate.

    (4)(i) Paragraph (d) of the clause at 52.232-5, Payments under Fixed-Price Construction Contracts, and paragraph (e)(6) of the clause at 52.232-27, Prompt Payment for Construction Contracts, provide for the contractor to pay interest on unearned amounts in certain circumstances. The Government must recover this interest from subsequent payments to the contractor. Therefore, contracting officers normally must make no demand for payment. Contracting officers must—

    (A) Compute the amount in accordance with the clause;

    (B) Provide the contractor with a final decision; and

    (C) Notify the payment office of the amount to be withheld.

    (ii) The payment office is responsible for making the deduction of interest. Amounts collected in accordance with these provisions revert to the United States Treasury.

    (e) Cost-reimbursement contracts for services. For purposes of computing late payment interest penalties that may apply, the due date for making interim payments on cost-reimbursement contracts for services is 30 days after the date of receipt of a proper invoice.

    (f) Food and specified items. Start Printed Page 65358

    If the items delivered are:Payment must be made as close as possible to, but not later than:
    (1) Meat or meat food products. As defined in section 2(a)(3) of the Packers and Stockyard Act of 1921 (7 U.S.C. 182(3)), and as further defined in Public Law 98-181, including any edible fresh or frozen poultry meat, any perishable poultry meat food product, fresh eggs, and any perishable egg product7th day after product delivery.
    (2) Fresh or frozen fish. As defined in section 204(3) of the Fish and Seafood Promotion Act of 1986 (16 U.S.C. 4003(3))7th day after product delivery.
    (3) Perishable agricultural commodities. As defined in section 1(4) of the Perishable Agricultural Commodities Act of 1930 (7 U.S.C. 499a(4))10th day after product delivery, unless another date is specified in the contract.
    (4) Dairy products. As defined in section 111(e) of the Dairy Production Stabilization Act of 1983 (7 U.S.C. 4502(e)), edible fats or oils, and food products prepared from edible fats or oils. Liquid milk, cheese, certain processed cheese products, butter, yogurt, ice cream, mayonnaise, salad dressings, and other similar products fall within this classification. Nothing in the Act limits this classification to refrigerated products. If questions arise regarding the proper classification of a specific product, the contracting officer must follow prevailing industry practices in specifying a contract payment due date. The burden of proof that a classification of a specific product is, in fact, prevailing industry practice is upon the contractor making the representation10th day after a proper invoice has been received.

    (g) Multiple payment due dates. Contracting officers may encourage, but not require, contractors to submit separate invoices for products with different payment due dates under the same contract or order. When an invoice contains items with different payment due dates (i.e., a mixed invoice), the payment office will, subject to agency policy—

    (1) Pay the entire invoice on the earliest due date; or

    (2) Split invoice payments, making payments by the applicable due dates.

    Payment documentation and process.

    (a) General. Payment will be based on receipt of a proper invoice and satisfactory contract performance.

    (b) Content of invoices. (1) A proper invoice must include the following items (except for interim payments on cost reimbursement contracts for services):

    (i) Name and address of the contractor.

    (ii) Invoice date and invoice number. (Contractors should date invoices as close as possible to the date of mailing or transmission.)

    (iii) Contract number or other authorization for supplies delivered or services performed (including order number and contract line item number).

    (iv) Description, quantity, unit of measure, unit price, and extended price of supplies delivered or services performed.

    (v) Shipping and payment terms (e.g., shipment number and date of shipment, discount for prompt payment terms). Bill of lading number and weight of shipment will be shown for shipments on Government bills of lading.

    (vi) Name and address of contractor official to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment).

    (vii) Name (where practicable), title, phone number, and mailing address of person to notify in the event of a defective invoice.

    (viii) Taxpayer Identification Number (TIN). The contractor must include its TIN on the invoice only if required by agency procedures. (See 4.9 TIN requirements.)

    (ix) Electronic funds transfer (EFT) banking information.

    (A) The contractor must include EFT banking information on the invoice only if required by agency procedures.

    (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the contractor must have submitted correct EFT banking information in accordance with the applicable solicitation provision (e.g., 52.232-38, Submission of Electronic Funds Transfer Information with Offer), contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration, or 52.232-34, Payment by Electronic Funds Transfer—Other Than Central Contractor Registration), or applicable agency procedures.

    (C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

    (x) Any other information or documentation required by the contract (e.g., evidence of shipment).

    (2) An interim payment request under a cost-reimbursement contract for services constitutes a proper invoice for purposes of this subsection if it includes all of the information required by the contract.

    (3) If the invoice does not comply with these requirements, the designated billing office must return it within 7 days after receipt (3 days on contracts for meat, meat food products, or fish; 5 days on contracts for perishable agricultural commodities, dairy products, edible fats or oils, and food products prepared from edible fats or oils), with the reasons why it is not a proper invoice. If such notice is not timely, then the designated billing office must adjust the due date for the purpose of determining an interest penalty, if any.

    (c) Authorization to pay. All invoice payments, with the exception of interim payments on cost-reimbursement contracts for services, must be supported by a receiving report or other Government documentation authorizing payment (e.g., Government certified voucher). The agency receiving official should forward the receiving report or other Government documentation to the designated payment office by the 5th working day after Government acceptance or approval, unless other arrangements have been made. This period of time does not extend the due dates prescribed in this section. Acceptance should be completed as expeditiously as possible. The receiving report or other Government documentation authorizing payment must, as a minimum, include the following:

    (1) Contract number or other authorization for supplies delivered or services performed.

    (2) Description of supplies delivered or services performed.

    (3) Quantities of supplies received and accepted or services performed, if applicable.

    (4) Date supplies delivered or services performed.

    (5) Date that the designated Government official—

    (i) Accepted the supplies or services; or

    (ii) Approved the progress payment request, if the request is being made under the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, or the clause at 52.232-10, Start Printed Page 65359Payments Under Fixed-Price Architect-Engineer Contracts.

    (6) Signature, printed name, title, mailing address, and telephone number of the designated Government official responsible for acceptance or approval functions.

    (d) Billing office. The designated billing office must immediately annotate each invoice with the actual date it receives the invoice.

    (e) Payment office. The designated payment office will annotate each invoice and receiving report with the actual date it receives the invoice.

    Making payments.

    (a) General. The Government will not make invoice payments earlier than 7 days prior to the due dates specified in the contract unless the agency head determines—

    (1) To make earlier payment on a case-by-case basis; or

    (2) That the use of accelerated payment methods are necessary (see 32.903(a)(5)).

    (b) Payment office. The designated payment office—

    (1) Will mail checks on the same day they are dated;

    (2) For payments made by EFT, will specify a date on or before the established due date for settlement of the payment at a Federal Reserve Bank;

    (3) When the due date falls on a Saturday, Sunday, or legal holiday when Government offices are closed, may make payment on the following working day without incurring a late payment interest penalty.

    (4) When it is determined that the designated billing office erroneously rejected a proper invoice and upon resubmission of the invoice, will enter in the payment system the original date the invoice was received by the designated billing office for the purpose of calculating the correct payment due date and any interest penalties that may be due.

    (c) Partial deliveries. (1) Contracting officers must, where the nature of the work permits, write contract statements of work and pricing arrangements that allow contractors to deliver and receive invoice payments for discrete portions of the work as soon as completed and found acceptable by the Government (see 32.102(d)).

    (2) Unless specifically prohibited by the contract, the clause at 52.232-1, Payments, provides that the contractor is entitled to payment for accepted partial deliveries of supplies or partial performance of services that comply with all applicable contract requirements and for which prices can be calculated from the contract terms.

    (d) Contractor identifier. Each payment or remittance advice will use the contractor invoice number in addition to any Government or contract information in describing any payment made.

    (e) Discounts. When a discount for prompt payment is taken, the designated payment office will make payment to the contractor as close as possible to, but not later than, the end of the discount period. The discount period is specified by the contractor and is calculated from the date of the contractor's proper invoice. If the contractor has not placed a date on the invoice, the due date is calculated from the date the designated billing office receives a proper invoice, provided the agency annotates such invoice with the date of receipt at the time of receipt. When the discount date falls on a Saturday, Sunday, or legal holiday when Government offices are closed, the designated payment office may make payment on the following working day and take a discount. Payment terms are specified in the clause at 52.232-8, Discounts for Prompt Payment.

    Interest penalties.

    (a) Late payment. The designated payment office will pay an interest penalty automatically, without request from the contractor, when all of the following conditions, if applicable, have been met:

    (1) The designated billing office received a proper invoice.

    (2) The Government processed a receiving report or other Government documentation authorizing payment, and there was no disagreement over quantity, quality, or contractor compliance with any contract requirement.

    (3) In the case of a final invoice, the payment amount is not subject to further contract settlement actions between the Government and the contractor.

    (4) The designated payment office paid the contractor after the due date.

    (5) In the case of interim payments on cost-reimbursement contracts for services, when payment is made more than 30 days after the designated billing office receives a proper invoice.

    (b) Improperly taken discount. The designated payment office will pay an interest penalty automatically, without request from the contractor, if the Government takes a discount for prompt payment improperly. The interest penalty is calculated on the amount of discount taken for the period beginning with the first day after the end of the discount period through the date when the contractor is paid.

    (c) Failure to pay interest. (1) The designated payment office will pay a penalty amount, in addition to the interest penalty amount, only if—

    (i) The Government owes an interest penalty of $1 or more;

    (ii) The designated payment office does not pay the interest penalty within 10 days after the date the invoice amount is paid; and

    (iii) The contractor makes a written demand to the designated payment office for additional penalty payment in accordance with paragraph (c)(2) of this section, postmarked not later than 40 days after the date the invoice amount is paid.

    (2)(i) Contractors must support written demands for additional penalty payments with the following data. The Government must not request additional data. Contractors must—

    (A) Specifically assert that late payment interest is due under a specific invoice, and request payment of all overdue late payment interest penalty and such additional penalty as may be required;

    (B) Attach a copy of the invoice on which the unpaid late payment interest is due; and

    (C) State that payment of the principal has been received, including the date of receipt.

    (ii) If there is no postmark or the postmark is illegible—

    (A) The designated payment office that receives the demand will annotate it with the date of receipt, provided the demand is received on or before the 40th day after payment was made; or

    (B) If the designated payment office fails to make the required annotation, the Government will determine the demand's validity based on the date the contractor has placed on the demand; provided such date is no later than the 40th day after payment was made.

    (d) Disagreements. (1) The payment office will not pay interest penalties if payment delays are due to disagreement between the Government and contractor concerning—

    (i) The payment amount;

    (ii) Contract compliance; or

    (iii) Amounts temporarily withheld or retained in accordance with the terms of the contract.

    (2) The Government and the contractor must resolve claims involving disputes, and any interest that may be payable in accordance with the Disputes clause.

    (e) Computation of interest penalties. The Government will compute interest penalties in accordance with OMB prompt payment regulations at 5 CFR part 1315. These regulations are available via the Internet at http://www.fms.treas.gov/​prompt/​. Start Printed Page 65360

    (f) Unavailability of funds. The temporary unavailability of funds to make a timely payment does not relieve an agency from the obligation to pay interest penalties.

    Contract clauses.

    (a) Insert the clause at 52.232-26, Prompt Payment for Fixed-Price Architect-Engineer Contracts, in solicitations and contracts that contain the clause at 52.232-10, Payments Under Fixed-Price Architect-Engineer Contracts.

    (1) As authorized in 32.904(c)(2), the contracting officer may modify the date in paragraph (a)(4)(i) of the clause to specify a period longer than 7 days for constructive acceptance or constructive approval, if required to afford the Government a practicable opportunity to inspect and test the supplies furnished or evaluate the services performed.

    (2) As provided in 32.903, agency policies and procedures may authorize amendment of paragraphs (a)(1)(i) and (ii) of the clause to insert a period shorter than 30 days (but not less than 7 days) for making contract invoice payments.

    (b) Insert the clause at 52.232-27, Prompt Payment for Construction Contracts, in all solicitations and contracts for construction (see part 36).

    (1) As authorized in 32.904(d)(1)(i)(B), the contracting officer may modify the date in paragraph (a)(1)(i)(A) of the clause to specify a period longer than 14 days if required to afford the Government a reasonable opportunity to adequately inspect the work and to determine the adequacy of the Contractor's performance under the contract.

    (2) As authorized in 32.904(d)(2)(iv), the contracting officer may modify the date in paragraph (a)(4)(i) of the clause to specify a period longer than 7 days for constructive acceptance or constructive approval if required to afford the Government a reasonable opportunity to inspect and test the supplies furnished or evaluate the services performed.

    (c) Insert the clause at 52.232-25, Prompt Payment, in all other solicitations and contracts, except when the clause at 52.212-4, Contract Terms and Conditions—Commercial Items, applies, or when payment terms and late payment penalties are established by other governmental authority (e.g., tariffs).

    (1) As authorized in 32.904(b)(1)(ii)(B)(4), the contracting officer may modify the date in paragraph (a)(5)(i) of the clause to specify a period longer than 7 days for constructive acceptance, if required to afford the Government a reasonable opportunity to inspect and test the supplies furnished or to evaluate the services performed, except in the case of a contract for the purchase of a commercial item, including a brand-name commercial item for authorized resale (e.g., commissary items).

    (2) As provided in 32.903, agency policies and procedures may authorize amendment of paragraphs (a)(1)(i) and (ii) of the clause to insert a period shorter than 30 days (but not less than 7 days) for making contract invoice payments.

    (3) If the contract is a cost-reimbursement contract for services, use the clause with its Alternate I.

    Contractor inquiries.

    (a) Direct questions involving—

    (1) Delinquent payments to the designated billing office or designated payment office; and

    (2) Disagreements in payment amount or timing to the contracting officer for resolution. The contracting officer must coordinate within appropriate contracting channels and seek the advice of other offices as necessary to resolve disagreements.

    (b) Small business concerns may contact the agency's local small business specialist or representative from the Office of Small and Disadvantaged Business Utilization to obtain additional assistance related to payment issues, late payment interest penalties, and information on the Prompt Payment Act.

    Start Part

    PART 52—SOLICITATION PROVISIONS AND CONTRACT CLAUSES

    End Part Start Amendment Part

    8. Amend section 52.212-4 by—

    End Amendment Part Start Amendment Part

    a. Revising the date of the clause;

    End Amendment Part Start Amendment Part

    b. Revising paragraph (g) (and removing the undesignated paragraph that follows) of the clause; and

    End Amendment Part Start Amendment Part

    c. Revising the second sentence of paragraph (i) of the clause to read as follows:

    End Amendment Part
    Contract terms and conditions—commercial items.
    * * * * *

    Contract Terms and Conditions—Commercial Items (Feb 2002)

    * * * * *

    (g) Invoice. (1) The Contractor shall submit an original invoice and three copies (or electronic invoice, if authorized) to the address designated in the contract to receive invoices. An invoice must include—

    (i) Name and address of the Contractor;

    (ii) Invoice date and number;

    (iii) Contract number, contract line item number and, if applicable, the order number;

    (iv) Description, quantity, unit of measure, unit price and extended price of the items delivered;

    (v) Shipping number and date of shipment, including the bill of lading number and weight of shipment if shipped on Government bill of lading;

    (vi) Terms of any discount for prompt payment offered;

    (vii) Name and address of official to whom payment is to be sent;

    (viii) Name, title, and phone number of person to notify in event of defective invoice; and

    (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

    (x) Electronic funds transfer (EFT) banking information.

    (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

    (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision, contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration, or 52.232-34, Payment by Electronic Funds Transfer—Other Than Central Contractor Registration), or applicable agency procedures.

    (C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

    (2) Invoices will be handled in accordance with the Prompt Payment Act (31 U.S.C. 3903) and Office of Management and Budget (OMB) prompt payment regulations at 5 CFR part 1315.

    * * * * *

    (i) Payment. * * * The Government will make payment in accordance with the Prompt Payment Act (31 U.S.C. 3903) and OMB prompt payment regulations at 5 CFR part 1315. * * *

    * * * * *

    (End of clause)

    [Amended]
    Start Amendment Part

    9. In section 52.213-4, amend the clause heading by removing “(May 2001)” and adding “(Feb 2002)” in its place; and in paragraph (a)(2)(ii) by removing “(May 1997)” and in paragraph (a)(2)(iv) by removing “(June 1997)” and adding “(FEB 2002)” in their places, respectively.

    End Amendment Part Start Amendment Part

    10. Amend section 52.216-7 by revising the date of the clause and paragraph (a) to read as follows:

    End Amendment Part
    Allowable Cost and Payment.
    * * * * *

    Allowable Cost and Payment (Feb 2002)

    (a) Invoicing. (1) The Government will make payments to the Contractor when requested as work progresses, but (except for small business concerns) not more often than Start Printed Page 65361once every 2 weeks, in amounts determined to be allowable by the Contracting Officer in accordance with Federal Acquisition Regulation (FAR) subpart 31.2 in effect on the date of this contract and the terms of this contract. The Contractor may submit to an authorized representative of the Contracting Officer, in such form and reasonable detail as the representative may require, an invoice or voucher supported by a statement of the claimed allowable cost for performing this contract.

    (2) Contract financing payments are not subject to the interest penalty provisions of the Prompt Payment Act. Interim payments made prior to the final payment under the contract are contract financing payments, except interim payments if this contract contains Alternate I to the clause at 52.232-25.

    (3) The designated payment office will make interim payments for contract financing on the ____[Contracting Officer insert day as prescribed by agency head; if not prescribed, insert “30th”] day after the designated billing office receives a proper payment request.

    In the event that the Government requires an audit or other review of a specific payment request to ensure compliance with the terms and conditions of the contract, the designated payment office is not compelled to make payment by the specified due date.

    * * * * *

    (End of clause)

    Start Amendment Part

    11. Amend section 52.216-13 by revising the date of the clause and paragraph (b) to read as follows:

    End Amendment Part
    Allowable Cost and Payment—Facilities.
    * * * * *

    Allowable Cost and Payment—Facilities (Feb 2002)

    * * * * *

    (b) Invoicing. (1) The Government will make payments to the Contractor when requested once each month. The Contractor may submit to an authorized representative of the Contracting Officer, in such form and reasonable detail as the representative may require, an invoice or voucher supported by a statement of the claimed allowable cost for the performance of this contract.

    (2) Contract financing payments are not subject to the interest penalty provisions of the Prompt Payment Act. Interim payments made prior to the final payment under the contract are contract financing payments, except interim payments if this contract contains Alternate I to the clause at 52.232-25.

    (3) The designated payment office will make interim payments for contract financing on the ____[Contracting Officer insert day as prescribed by agency head; if not prescribed, insert “30th”] day after the designated billing office receives a proper payment request. In the event that the Government requires an audit or other review of a specific payment request to ensure compliance with the terms and conditions of the contract, the designated payment office is not compelled to make payment by the specified due date.

    * * * * *

    (End of clause)

    Start Amendment Part

    12. Amend section 52.232-7 by revising the date of the clause; by adding paragraph (h); and by revising Alternate II to read as follows:

    End Amendment Part
    Payments under time-and-materials and labor-hour contracts.
    * * * * *

    Payments Under Time-and-Materials and Labor-Hour Contracts (Feb 2002)

    * * * * *

    (h) Interim payments. (1) Interim payments made prior to the final payment under the contract are contract financing payments. Contract financing payments are not subject to the interest penalty provisions of the Prompt Payment Act.

    (2) The designated payment office will make interim payments for contract financing on the ____[Contracting Officer insert day as prescribed by agency head; if not prescribed, insert “30th”] day after the designated billing office receives a proper payment request. In the event that the Government requires an audit or other review of a specific payment request to ensure compliance with the terms and conditions of the contract, the designated payment office is not compelled to make payment by the specified due date.

    (End of clause)

    * * * * *

    Alternate II (Feb 2002). If a labor-hour contract is contemplated, and if no specific reimbursement for materials furnished is intended, the Contracting Officer may add the following paragraph (i) to the basic clause:

    (i) The terms of this clause that govern reimbursement for materials furnished are considered to have been deleted.

    Start Amendment Part

    13. Amend section 52.232-8 by revising the date of the clause and the last sentence of paragraph (a) to read as follows:

    End Amendment Part
    Discounts for prompt payment.
    * * * * *

    Discounts for Prompt Payment (Feb 2002)

    (a) * * * As an alternative to offering a discount for prompt payment in conjunction with the offer, offerors awarded contracts may include discounts for prompt payment on individual invoices.

    * * * * *
    Start Amendment Part

    14. Amend section 52.232-16 by revising the date of the clause; by adding paragraph (l) to the end of the clause; by revising Alternate II; and by revising the introductory text of Alternate III and redesignating Alternate III paragraph (l) as (m). The added and revised text reads as follows:

    End Amendment Part
    Progress payments.
    * * * * *

    Progress Payments (Feb 2002)

    * * * * *

    (l) Due date. The designated payment office will make progress payments on the ____ [Contracting Officer insert date as prescribed by agency head; if not prescribed, insert “30th”] day after the designated billing office receives a proper progress payment request. In the event that the Government requires an audit or other review of a specific progress payment request to ensure compliance with the terms and conditions of the contract, the designated payment office is not compelled to make payment by the specified due date. Progress payments are considered contract financing and are not subject to the interest penalty provisions of the Prompt Payment Act.

    (End of clause)

    * * * * *

    Alternate II (Feb 2002). If the contract is a letter contract, add paragraphs (m) and (n). The amount specified in paragraph (n) must not exceed 80 percent applied to the maximum liability of the Government under the letter contract. Separate limits may be specified for separate parts of the work.

    (m) Progress payments made under this letter contract shall, unless previously liquidated under paragraph (b) of this clause, be liquidated under the following procedures:

    (1) If this letter contract is superseded by a definitive contract, unliquidated progress payments made under this letter contract shall be liquidated by deducting the amount from the first progress or other payments made under the definitive contract.

    (2) If this letter contract is not superseded by a definitive contract calling for the furnishing of all or part of the articles or services covered under the letter contract, unliquidated progress payments made under the letter contract shall be liquidated by deduction from the amount payable under the Termination clause.

    (3) If this letter contract is partly terminated and partly superseded by a contract, the Government will allocate the unliquidated progress payments to the terminated and unterminated portions as the Government deems equitable, and will liquidate each portion under the relevant procedure in paragraphs (m)(1) and (m)(2) of this clause.

    (4) If the method of liquidating progress payments provided in this clause does not result in full liquidation, the Contractor shall immediately pay the unliquidated balance to the Government on demand.

    (n) The amount of unliquidated progress payments shall not exceed ____ [Contracting Officer specify dollar amount].

    Alternate III (Feb 2002). As prescribed in 35.502-4(d), add the following paragraph (m) to the basic clause. If Alternate II is also being used, redesignate the following paragraph as paragraph (o):

    Start Amendment Part

    15. Revise sections 52.232-25, 52.232-26, and 52.232-27 to read as follows:

    End Amendment Part
    Start Printed Page 65362
    Prompt payment.

    As prescribed in 32.908(c), insert the following clause:

    Prompt Payment (Feb 2002)

    Notwithstanding any other payment clause in this contract, the Government will make invoice payments under the terms and conditions specified in this clause. The Government considers payment as being made on the day a check is dated or the date of an electronic funds transfer (EFT). Definitions of pertinent terms are set forth in sections 2.101, 32.001, and 32.902 of the Federal Acquisition Regulation. All days referred to in this clause are calendar days, unless otherwise specified. (However, see paragraph (a)(4) of this clause concerning payments due on Saturdays, Sundays, and legal holidays.)

    (a) Invoice payments—(1) Due date. (i) Except as indicated in paragraphs (a)(2) and (c) of this clause, the due date for making invoice payments by the designated payment office is the later of the following two events:

    (A) The 30th day after the designated billing office receives a proper invoice from the Contractor (except as provided in paragraph (a)(1)(ii) of this clause).

    (B) The 30th day after Government acceptance of supplies delivered or services performed. For a final invoice, when the payment amount is subject to contract settlement actions, acceptance is deemed to occur on the effective date of the contract settlement.

    (ii) If the designated billing office fails to annotate the invoice with the actual date of receipt at the time of receipt, the invoice payment due date is the 30th day after the date of the Contractor's invoice, provided the designated billing office receives a proper invoice and there is no disagreement over quantity, quality, or Contractor compliance with contract requirements.

    (2) Certain food products and other payments. (i) Due dates on Contractor invoices for meat, meat food products, or fish; perishable agricultural commodities; and dairy products, edible fats or oils, and food products prepared from edible fats or oils are—

    (A) For meat or meat food products, as defined in section 2(a)(3) of the Packers and Stockyard Act of 1921 (7 U.S.C. 182(3)), and as further defined in Pub. L. 98-181, including any edible fresh or frozen poultry meat, any perishable poultry meat food product, fresh eggs, and any perishable egg product, as close as possible to, but not later than, the 7th day after product delivery.

    (B) For fresh or frozen fish, as defined in section 204(3) of the Fish and Seafood Promotion Act of 1986 (16 U.S.C. 4003(3)), as close as possible to, but not later than, the 7th day after product delivery.

    (C) For perishable agricultural commodities, as defined in section 1(4) of the Perishable Agricultural Commodities Act of 1930 (7 U.S.C. 499a(4)), as close as possible to, but not later than, the 10th day after product delivery, unless another date is specified in the contract.

    (D) For dairy products, as defined in section 111(e) of the Dairy Production Stabilization Act of 1983 (7 U.S.C. 4502(e)), edible fats or oils, and food products prepared from edible fats or oils, as close as possible to, but not later than, the 10th day after the date on which a proper invoice has been received. Liquid milk, cheese, certain processed cheese products, butter, yogurt, ice cream, mayonnaise, salad dressings, and other similar products, fall within this classification. Nothing in the Act limits this classification to refrigerated products. When questions arise regarding the proper classification of a specific product, prevailing industry practices will be followed in specifying a contract payment due date. The burden of proof that a classification of a specific product is, in fact, prevailing industry practice is upon the Contractor making the representation.

    (ii) If the contract does not require submission of an invoice for payment (e.g., periodic lease payments), the due date will be as specified in the contract.

    (3) Contractor's invoice. The Contractor shall prepare and submit invoices to the designated billing office specified in the contract. A proper invoice must include the items listed in paragraphs (a)(3)(i) through (a)(3)(x) of this clause. If the invoice does not comply with these requirements, the designated billing office will return it within 7 days after receipt (3 days for meat, meat food products, or fish; 5 days for perishable agricultural commodities, dairy products, edible fats or oils, and food products prepared from edible fats or oils), with the reasons why it is not a proper invoice. The Government will take into account untimely notification when computing any interest penalty owed the Contractor.

    (i) Name and address of the Contractor.

    (ii) Invoice date and invoice number. (The Contractor should date invoices as close as possible to the date of the mailing or transmission.)

    (iii) Contract number or other authorization for supplies delivered or services performed (including order number and contract line item number).

    (iv) Description, quantity, unit of measure, unit price, and extended price of supplies delivered or services performed.

    (v) Shipping and payment terms (e.g., shipment number and date of shipment, discount for prompt payment terms). Bill of lading number and weight of shipment will be shown for shipments on Government bills of lading.

    (vi) Name and address of Contractor official to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment).

    (vii) Name (where practicable), title, phone number, and mailing address of person to notify in the event of a defective invoice.

    (viii) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

    (ix) Electronic funds transfer (EFT) banking information.

    (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

    (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision (e.g., 52.232-38, Submission of Electronic Funds Transfer Information with Offer), contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration, or 52.232-34, Payment by Electronic Funds Transfer—Other Than Central Contractor Registration), or applicable agency procedures.

    (C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

    (x) Any other information or documentation required by the contract (e.g., evidence of shipment).

    (4) Interest penalty. The designated payment office will pay an interest penalty automatically, without request from the Contractor, if payment is not made by the due date and the conditions listed in paragraphs (a)(4)(i) through (a)(4)(iii) of this clause are met, if applicable. However, when the due date falls on a Saturday, Sunday, or legal holiday, the designated payment office may make payment on the following working day without incurring a late payment interest penalty.

    (i) The designated billing office received a proper invoice.

    (ii) The Government processed a receiving report or other Government documentation authorizing payment, and there was no disagreement over quantity, quality, or Contractor compliance with any contract term or condition.

    (iii) In the case of a final invoice for any balance of funds due the Contractor for supplies delivered or services performed, the amount was not subject to further contract settlement actions between the Government and the Contractor.

    (5) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

    (i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance is deemed to occur constructively on the 7th day (unless otherwise specified in this contract) after the Contractor delivers the supplies or performs the services in accordance with the terms and conditions of the contract, unless there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. If actual acceptance occurs within the constructive acceptance period, the Government will base the determination of an interest penalty on the actual date of acceptance. The constructive acceptance requirement does not, however, compel Government officials to accept supplies or services, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

    (ii) The prompt payment regulations at 5 CFR 1315.10(c) do not require the Government to pay interest penalties if payment delays are due to disagreement between the Government and the Contractor over the payment amount or other issues involving contract compliance, or on Start Printed Page 65363amounts temporarily withheld or retained in accordance with the terms of the contract. The Government and the Contractor shall resolve claims involving disputes and any interest that may be payable in accordance with the clause at FAR 52.233-1, Disputes.

    (6) Discounts for prompt payment. The designated payment office will pay an interest penalty automatically, without request from the Contractor, if the Government takes a discount for prompt payment improperly. The Government will calculate the interest penalty in accordance with the prompt payment regulations at 5 CFR part 1315.

    (7) Additional interest penalty. (i) The designated payment office will pay a penalty amount, calculated in accordance with the prompt payment regulations at 5 CFR part 1315 in addition to the interest penalty amount only if—

    (A) The Government owes an interest penalty of $1 or more;

    (B) The designated payment office does not pay the interest penalty within 10 days after the date the invoice amount is paid; and

    (C) The Contractor makes a written demand to the designated payment office for additional penalty payment, in accordance with paragraph (a)(7)(ii) of this clause, postmarked not later than 40 days after the invoice amount is paid.

    (ii)(A) The Contractor shall support written demands for additional penalty payments with the following data. The Government will not request any additional data. The Contractor shall—

    (1) Specifically assert that late payment interest is due under a specific invoice, and request payment of all overdue late payment interest penalty and such additional penalty as may be required;

    (2) Attach a copy of the invoice on which the unpaid late payment interest is due; and

    (3) State that payment of the principal has been received, including the date of receipt.

    (B) If there is no postmark or the postmark is illegible—

    (1) The designated payment office that receives the demand will annotate it with the date of receipt, provided the demand is received on or before the 40th day after payment was made; or

    (2) If the designated payment office fails to make the required annotation, the Government will determine the demand's validity based on the date the Contractor has placed on the demand, provided such date is no later than the 40th day after payment was made.

    (iii) The additional penalty does not apply to payments regulated by other Government regulations (e.g., payments under utility contracts subject to tariffs and regulation).

    (b) Contract financing payment. If this contract provides for contract financing, the Government will make contract financing payments in accordance with the applicable contract financing clause.

    (c) Fast payment procedure due dates. If this contract contains the clause at 52.213-1, Fast Payment Procedure, payments will be made within 15 days after the date of receipt of the invoice.

    (d) Overpayments. If the Contractor becomes aware of a duplicate payment or that the Government has otherwise overpaid on an invoice payment, the Contractor shall immediately notify the Contracting Officer and request instructions for disposition of the overpayment.

    (End of clause)

    Alternate I (Feb 2002). As prescribed in 32.908(c)(3), add the following paragraph (e) to the basic clause:

    (e) Invoices for interim payments. For interim payments under this cost-reimbursement contract for services—

    (1) Paragraphs (a)(2), (a)(3), (a)(4)(ii), (a)(4)(iii), and (a)(5)(i) do not apply;

    (2) For purposes of computing late payment interest penalties that may apply, the due date for payment is the 30th day after the designated billing office receives a proper invoice; and

    (3) The contractor shall submit invoices for interim payments in accordance with paragraph (a) of FAR 52.216-7, Allowable Cost and Payment. If the invoice does not comply with contract requirements, it will be returned within 7 days after the date the designated billing office received the invoice.

    Prompt payment for fixed-price architect-engineer contracts.

    As prescribed in 32.908(a), insert the following clause:

    Prompt Payment for Fixed-Price Architect-Engineer Contracts (FEB 2002)

    Notwithstanding any other payment terms in this contract, the Government will make invoice payments under the terms and conditions specified in this clause. The Government considers payment as being made on the day a check is dated or the date of an electronic funds transfer. Definitions of pertinent terms are set forth in sections 2.101, 32.001, and 32.902 of the Federal Acquisition Regulation. All days referred to in this clause are calendar days, unless otherwise specified. (However, see paragraph (a)(3) of this clause concerning payments due on Saturdays, Sundays, and legal holidays.)

    (a) Invoice payments—(1) Due date. The due date for making invoice payments is—

    (i) For work or services completed by the Contractor, the later of the following two events:

    (A) The 30th day after the designated billing office receives a proper invoice from the Contractor (except as provided in paragraph (a)(1)(iii) of this clause).

    (B) The 30th day after Government acceptance of the work or services completed by the Contractor. For a final invoice, when the payment amount is subject to contract settlement actions (e.g., release of claims), acceptance is deemed to occur on the effective date of the settlement.

    (ii) The due date for progress payments is the 30th day after Government approval of Contractor estimates of work or services accomplished.

    (iii) If the designated billing office fails to annotate the invoice or payment request with the actual date of receipt at the time of receipt, the payment due date is the 30th day after the date of the Contractor's invoice or payment request, provided the designated billing office receives a proper invoice or payment request and there is no disagreement over quantity, quality, or Contractor compliance with contract requirements.

    (2) Contractor's invoice. The Contractor shall prepare and submit invoices to the designated billing office specified in the contract. A proper invoice must include the items listed in paragraphs (a)(2)(i) through (a)(2)(x) of this clause. If the invoice does not comply with these requirements, the designated billing office will return it within 7 days after receipt, with the reasons why it is not a proper invoice. When computing any interest penalty owed the Contractor, the Government will take into account if the Government notifies the Contractor of an improper invoice in an untimely manner.

    (i) Name and address of the Contractor.

    (ii) Invoice date and invoice number. (The Contractor should date invoices as close as possible to the date of mailing or transmission.)

    (iii) Contract number or other authorization for work or services performed (including order number and contract line item number).

    (iv) Description of work or services performed.

    (v) Delivery and payment terms (e.g., discount for prompt payment terms).

    (vi) Name and address of Contractor official to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment).

    (vii) Name (where practicable), title, phone number, and mailing address of person to notify in the event of a defective invoice.

    (viii) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

    (ix) Electronic funds transfer (EFT) banking information.

    (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

    (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision (e.g., 52.232-38, Submission of Electronic Funds Transfer Information with Offer), contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration, or 52.232-34,Payment by Electronic Funds Transfer—Other Than Central Contractor Registration), or applicable agency procedures.

    (C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

    (x) Any other information or documentation required by the contract.

    (3) Interest penalty. The designated payment office will pay an interest penalty automatically, without request from the Contractor, if payment is not made by the due date and the conditions listed in paragraphs (a)(3)(i) through (a)(3)(iii) of this clause are met, if applicable. However, when the due date falls on a Saturday, Sunday, or legal holiday, the designated payment office may make payment on the following working day without incurring a late payment interest penalty.Start Printed Page 65364

    (i) The designated billing office received a proper invoice.

    (ii) The Government processed a receiving report or other Government documentation authorizing payment and there was no disagreement over quantity, quality, Contractor compliance with any contract term or condition, or requested progress payment amount.

    (iii) In the case of a final invoice for any balance of funds due the Contractor for work or services performed, the amount was not subject to further contract settlement actions between the Government and the Contractor.

    (4) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

    (i) For the sole purpose of computing an interest penalty that might be due the Contractor, Government acceptance or approval is deemed to occur constructively as shown in paragraphs (a)(4)(i)(A) and (B) of this clause. If actual acceptance or approval occurs within the constructive acceptance or approval period, the Government will base the determination of an interest penalty on the actual date of acceptance or approval. Constructive acceptance or constructive approval requirements do not apply if there is a disagreement over quantity, quality, Contractor compliance with a contract provision, or requested progress payment amounts. These requirements also do not compel Government officials to accept work or services, approve Contractor estimates, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

    (A) For work or services completed by the Contractor, Government acceptance is deemed to occur constructively on the 7th day after the Contractor completes the work or services in accordance with the terms and conditions of the contract.

    (B) For progress payments, Government approval is deemed to occur on the 7th day after the designated billing office receives the Contractor estimates.

    (ii) The prompt payment regulations at 5 CFR 1315.10(c) do not require the Government to pay interest penalties if payment delays are due to disagreement between the Government and the Contractor over the payment amount or other issues involving contract compliance, or on amounts temporarily withheld or retained in accordance with the terms of the contract. The Government and the Contractor shall resolve claims involving disputes, and any interest that may be payable in accordance with the clause at FAR 52.233-1, Disputes.

    (5) Discounts for prompt payment. The designated payment office will pay an interest penalty automatically, without request from the Contractor, if the Government takes a discount for prompt payment improperly. The Government will calculate the interest penalty in accordance with 5 CFR part 1315.

    (6) Additional interest penalty. (i) The designated payment office will pay a penalty amount, calculated in accordance with the prompt payment regulations at 5 CFR part 1315, in addition to the interest penalty amount only if—

    (A) The Government owes an interest penalty of $1 or more;

    (B) The designated payment office does not pay the interest penalty within 10 days after the date the invoice amount is paid; and

    (C) The contractor makes a written demand to the designated payment office for additional penalty payment, in accordance with paragraph (a)(6)(ii) of this clause, postmarked not later than 40 days after the date the invoice amount is paid.

    (ii)(A) The Contractor shall support written demands for additional penalty payments with the following data. The Government will not request any additional data. The Contractor shall—

    (1) Specifically assert that late payment interest is due under a specific invoice, and request payment of all overdue late payment interest penalty and such additional penalty as may be required;

    (2) Attach a copy of the invoice on which the unpaid late payment interest is due; and

    (3) State that payment of the principal has been received, including the date of receipt.

    (B) If there is no postmark or the postmark is illegible—

    (1) The designated payment office that receives the demand will annotate it with the date of receipt, provided the demand is received on or before the 40th day after payment was made; or

    (2) If the designated payment office fails to make the required annotation, the Government will determine the demand's validity based on the date the Contractor has placed on the demand, provided such date is no later than the 40th day after payment was made.

    (iii) The additional penalty does not apply to payments regulated by other Government regulations (e.g., payments under utility contracts subject to tariffs and regulation).

    (b) Contract financing payments. If this contract provides for contract financing, the Government will make contract financing payments in accordance with the applicable contract financing clause.

    (c) Overpayments. If the Contractor becomes aware of a duplicate payment or that the Government has otherwise overpaid on an invoice payment, the Contractor shall immediately notify the Contracting Officer and request instructions for disposition of the overpayment.

    (End of clause)

    Prompt payment for construction contracts.

    As prescribed in 32.908(b), insert the following clause:

    Prompt Payment for Construction Contracts (Feb 2002)

    Notwithstanding any other payment terms in this contract, the Government will make invoice payments under the terms and conditions specified in this clause. The Government considers payment as being made on the day a check is dated or the date of an electronic funds transfer.Definitions of pertinent terms are set forth in sections 2.101, 32.001, and 32.902 of the Federal Acquisition Regulation. All days referred to in this clause are calendar days, unless otherwise specified. (However, see paragraph (a)(3) concerning payments due on Saturdays, Sundays, and legal holidays.)

    (a) Invoice payments—(1) Types of invoice payments. For purposes of this clause, there are several types of invoice payments that may occur under this contract, as follows:

    (i) Progress payments, if provided for elsewhere in this contract, based on Contracting Officer approval of the estimated amount and value of work or services performed, including payments for reaching milestones in any project.

    (A) The due date for making such payments is 14 days after the designated billing office receives a proper payment request. If the designated billing office fails to annotate the payment request with the actual date of receipt at the time of receipt, the payment due date is the 14th day after the date of the Contractor's payment request, provided the designated billing office receives a proper payment request and there is no disagreement over quantity, quality, or Contractor compliance with contract requirements.

    (B) The due date for payment of any amounts retained by the Contracting Officer in accordance with the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts, is as specified in the contract or, if not specified, 30 days after approval by the Contracting Officer for release to the Contractor.

    (ii) Final payments based on completion and acceptance of all work and presentation of release of all claims against the Government arising by virtue of the contract, and payments for partial deliveries that have been accepted by the Government (e.g., each separate building, public work, or other division of the contract for which the price is stated separately in the contract).

    (A) The due date for making such payments is the later of the following two events:

    (1) The 30th day after the designated billing office receives a proper invoice from the Contractor.

    (2) The 30th day after Government acceptance of the work or services completed by the Contractor. For a final invoice when the payment amount is subject to contract settlement actions (e.g., release of claims), acceptance is deemed to occur on the effective date of the contract settlement.

    (B) If the designated billing office fails to annotate the invoice with the date of actual receipt at the time of receipt, the invoice payment due date is the 30th day after the date of the Contractor's invoice, provided the designated billing office receives a proper invoice and there is no disagreement over quantity, quality, or Contractor compliance with contract requirements.

    (2) Contractor's invoice. The Contractor shall prepare and submit invoices to the designated billing office specified in the contract. A proper invoice must include the items listed in paragraphs (a)(2)(i) through (a)(2)(xi) of this clause. If the invoice does not comply with these requirements, the designated billing office must return it within 7 days after receipt, with the reasons why it is not a proper invoice. When computing any interest penalty owed the Contractor, the Government will take into account if the Start Printed Page 65365Government notifies the Contractor of an improper invoice in an untimely manner.

    (i) Name and address of the Contractor.

    (ii) Invoice date and invoice number. (The Contractor should date invoices as close as possible to the date of mailing or transmission.)

    (iii) Contract number or other authorization for work or services performed (including order number and contract line item number).

    (iv) Description of work or services performed.

    (v) Delivery and payment terms (e.g., discount for prompt payment terms).

    (vi) Name and address of Contractor official to whom payment is to be sent (must be the same as that in the contract or in a proper notice of assignment).

    (vii) Name (where practicable), title, phone number, and mailing address of person to notify in the event of a defective invoice.

    (viii) For payments described in paragraph (a)(1)(i) of this clause, substantiation of the amounts requested and certification in accordance with the requirements of the clause at 52.232-5, Payments Under Fixed-Price Construction Contracts.

    (ix) Taxpayer Identification Number (TIN). The Contractor shall include its TIN on the invoice only if required elsewhere in this contract.

    (x) Electronic funds transfer (EFT) banking information.

    (A) The Contractor shall include EFT banking information on the invoice only if required elsewhere in this contract.

    (B) If EFT banking information is not required to be on the invoice, in order for the invoice to be a proper invoice, the Contractor shall have submitted correct EFT banking information in accordance with the applicable solicitation provision (e.g., 52.232-38, Submission of Electronic Funds Transfer Information with Offer), contract clause (e.g., 52.232-33, Payment by Electronic Funds Transfer—Central Contractor Registration, or 52.232-34, Payment by Electronic Funds Transfer—Other Than Central Contractor Registration), or applicable agency procedures.

    (C) EFT banking information is not required if the Government waived the requirement to pay by EFT.

    (xi) Any other information or documentation required by the contract.

    (3) Interest penalty. The designated payment office will pay an interest penalty automatically, without request from the Contractor, if payment is not made by the due date and the conditions listed in paragraphs (a)(3)(i) through (a)(3)(iii) of this clause are met, if applicable. However, when the due date falls on a Saturday, Sunday, or legal holiday, the designated payment office may make payment on the following working day without incurring a late payment interest penalty.

    (i) The designated billing office received a proper invoice.

    (ii) The Government processed a receiving report or other Government documentation authorizing payment and there was no disagreement over quantity, quality, Contractor compliance with any contract term or condition, or requested progress payment amount.

    (iii) In the case of a final invoice for any balance of funds due the Contractor for work or services performed, the amount was not subject to further contract settlement actions between the Government and the Contractor.

    (4) Computing penalty amount. The Government will compute the interest penalty in accordance with the Office of Management and Budget prompt payment regulations at 5 CFR part 1315.

    (i) For the sole purpose of computing an interest penalty that might be due the Contractor for payments described in paragraph (a)(1)(ii) of this clause, Government acceptance or approval is deemed to occur constructively on the 7th day after the Contractor has completed the work or services in accordance with the terms and conditions of the contract. If actual acceptance or approval occurs within the constructive acceptance or approval period, the Government will base the determination of an interest penalty on the actual date of acceptance or approval. Constructive acceptance or constructive approval requirements do not apply if there is a disagreement over quantity, quality, or Contractor compliance with a contract provision. These requirements also do not compel Government officials to accept work or services, approve Contractor estimates, perform contract administration functions, or make payment prior to fulfilling their responsibilities.

    (ii) The prompt payment regulations at 5 CFR 1315.10(c) do not require the Government to pay interest penalties if payment delays are due to disagreement between the Government and the Contractor over the payment amount or other issues involving contract compliance, or on amounts temporarily withheld or retained in accordance with the terms of the contract. The Government and the Contractor shall resolve claims involving disputes, and any interest that may be payable in accordance with the clause at FAR 52.233-1, Disputes.

    (5) Discounts for prompt payment. The designated payment office will pay an interest penalty automatically, without request from the Contractor, if the Government takes a discount for prompt payment improperly. The Government will calculate the interest penalty in accordance with the prompt payment regulations at 5 CFR part 1315.

    (6) Additional interest penalty. (i) The designated payment office will pay a penalty amount, calculated in accordance with the prompt payment regulations at 5 CFR part 1315 in addition to the interest penalty amount only if—

    (A) The Government owes an interest penalty of $1 or more;

    (B) The designated payment office does not pay the interest penalty within 10 days after the date the invoice amount is paid; and

    (C) The Contractor makes a written demand to the designated payment office for additional penalty payment, in accordance with paragraph (a)(6)(ii) of this clause, postmarked not later than 40 days after the date the invoice amount is paid.

    (ii)(A) The Contractor shall support written demands for additional penalty payments with the following data. The Government will not request any additional data. The Contractor shall—

    (1) Specifically assert that late payment interest is due under a specific invoice, and request payment of all overdue late payment interest penalty and such additional penalty as may be required;

    (2) Attach a copy of the invoice on which the unpaid late payment interest was due; and

    (3) State that payment of the principal has been received, including the date of receipt.

    (B) If there is no postmark or the postmark is illegible—

    (1) The designated payment office that receives the demand will annotate it with the date of receipt provided the demand is received on or before the 40th day after payment was made; or

    (2) If the designated payment office fails to make the required annotation, the Government will determine the demand's validity based on the date the Contractor has placed on the demand, provided such date is no later than the 40th day after payment was made.

    (b) Contract financing payments. If this contract provides for contract financing, the Government will make contract financing payments in accordance with the applicable contract financing clause.

    (c) Subcontract clause requirements. The Contractor shall include in each subcontract for property or services (including a material supplier) for the purpose of performing this contract the following:

    (1) Prompt payment for subcontractors. A payment clause that obligates the Contractor to pay the subcontractor for satisfactory performance under its subcontract not later than 7 days from receipt of payment out of such amounts as are paid to the Contractor under this contract.

    (2) Interest for subcontractors. An interest penalty clause that obligates the Contractor to pay to the subcontractor an interest penalty for each payment not made in accordance with the payment clause—

    (i) For the period beginning on the day after the required payment date and ending on the date on which payment of the amount due is made; and

    (ii) Computed at the rate of interest established by the Secretary of the Treasury, and published in the Federal Register, for interest payments under section 12 of the Contract Disputes Act of 1978 (41 U.S.C. 611) in effect at the time the Contractor accrues the obligation to pay an interest penalty.

    (3) Subcontractor clause flowdown. A clause requiring each subcontractor tou

    (i) Include a payment clause and an interest penalty clause conforming to the standards set forth in paragraphs (c)(1) and (c)(2) of this clause in each of its subcontracts; and

    (ii) Require each of its subcontractors to include such clauses in their subcontracts with each lower-tier subcontractor or supplier.

    (d) Subcontract clause interpretation. The clauses required by paragraph (c) of this clause shall not be construed to impair the right of the Contractor or a subcontractor at any tier to negotiate, and to include in their subcontract, provisions that—Start Printed Page 65366

    (1) Retainage permitted. Permit the Contractor or a subcontractor to retain (without cause) a specified percentage of each progress payment otherwise due to a subcontractor for satisfactory performance under the subcontract without incurring any obligation to pay a late payment interest penalty, in accordance with terms and conditions agreed to by the parties to the subcontract, giving such recognition as the parties deem appropriate to the ability of a subcontractor to furnish a performance bond and a payment bond;

    (2) Withholding permitted. Permit the Contractor or subcontractor to make a determination that part or all of the subcontractor's request for payment may be withheld in accordance with the subcontract agreement; and

    (3) Withholding requirements. Permit such withholding without incurring any obligation to pay a late payment penalty if—

    (i) A notice conforming to the standards of paragraph (g) of this clause previously has been furnished to the subcontractor; and

    (ii) The Contractor furnishes to the Contracting Officer a copy of any notice issued by a Contractor pursuant to paragraph (d)(3)(i) of this clause.

    (e) Subcontractor withholding procedures. If a Contractor, after making a request for payment to the Government but before making a payment to a subcontractor for the subcontractor's performance covered by the payment request, discovers that all or a portion of the payment otherwise due such subcontractor is subject to withholding from the subcontractor in accordance with the subcontract agreement, then the Contractor shall—

    (1) Subcontractor notice. Furnish to the subcontractor a notice conforming to the standards of paragraph (g) of this clause as soon as practicable upon ascertaining the cause giving rise to a withholding, but prior to the due date for subcontractor payment;

    (2) Contracting Officer notice. Furnish to the Contracting Officer, as soon as practicable, a copy of the notice furnished to the subcontractor pursuant to paragraph (e)(1) of this clause;

    (3) Subcontractor progress payment reduction. Reduce the subcontractor's progress payment by an amount not to exceed the amount specified in the notice of withholding furnished under paragraph (e)(1) of this clause;

    (4) Subsequent subcontractor payment. Pay the subcontractor as soon as practicable after the correction of the identified subcontract performance deficiency, and—

    (i) Make such payment within—

    (A) Seven days after correction of the identified subcontract performance deficiency (unless the funds therefor must be recovered from the Government because of a reduction under paragraph (e)(5)(i)) of this clause; or

    (B) Seven days after the Contractor recovers such funds from the Government; or

    (ii) Incur an obligation to pay a late payment interest penalty computed at the rate of interest established by the Secretary of the Treasury, and published in the Federal Register, for interest payments under section 12 of the Contracts Disputes Act of 1978 (41 U.S.C. 611) in effect at the time the Contractor accrues the obligation to pay an interest penalty;

    (5) Notice to Contracting Officer. Notify the Contracting Officer upon—

    (i) Reduction of the amount of any subsequent certified application for payment; or

    (ii) Payment to the subcontractor of any withheld amounts of a progress payment, specifying—

    (A) The amounts withheld under paragraph (e)(1) of this clause; and

    (B) The dates that such withholding began and ended; and

    (6) Interest to Government. Be obligated to pay to the Government an amount equal to interest on the withheld payments (computed in the manner provided in 31 U.S.C. 3903(c)(1)), from the 8th day after receipt of the withheld amounts from the Government until—

    (i) The day the identified subcontractor performance deficiency is corrected; or

    (ii) The date that any subsequent payment is reduced under paragraph (e)(5)(i) of this clause.

    (f) Third-party deficiency reports—(1) Withholding from subcontractor. If a Contractor, after making payment to a first-tier subcontractor, receives from a supplier or subcontractor of the first-tier subcontractor (hereafter referred to as a “second-tier subcontractor”) a written notice in accordance with section 2 of the Act of August 24, 1935 (40 U.S.C. 270b, Miller Act), asserting a deficiency in such first-tier subcontractor's performance under the contract for which the Contractor may be ultimately liable, and the Contractor determines that all or a portion of future payments otherwise due such first-tier subcontractor is subject to withholding in accordance with the subcontract agreement, the Contractor may, without incurring an obligation to pay an interest penalty under paragraph (e)(6) of this clause—

    (i) Furnish to the first-tier subcontractor a notice conforming to the standards of paragraph (g) of this clause as soon as practicable upon making such determination; and

    (ii) Withhold from the first-tier subcontractor's next available progress payment or payments an amount not to exceed the amount specified in the notice of withholding furnished under paragraph (f)(1)(i) of this clause.

    (2) Subsequent payment or interest charge. As soon as practicable, but not later than 7 days after receipt of satisfactory written notification that the identified subcontract performance deficiency has been corrected, the Contractor shall—

    (i) Pay the amount withheld under paragraph (f)(1)(ii) of this clause to such first-tier subcontractor; or

    (ii) Incur an obligation to pay a late payment interest penalty to such first-tier subcontractor computed at the rate of interest established by the Secretary of the Treasury, and published in the Federal Register, for interest payments under section 12 of the Contracts Disputes Act of 1978 (41 U.S.C. 611) in effect at the time the Contractor accrues the obligation to pay an interest penalty.

    (g) Written notice of subcontractor withholding. The Contractor shall issue a written notice of any withholding to a subcontractor (with a copy furnished to the Contracting Officer), specifying—

    (1) The amount to be withheld;

    (2) The specific causes for the withholding under the terms of the subcontract; and

    (3) The remedial actions to be taken by the subcontractor in order to receive payment of the amounts withheld.

    (h) Subcontractor payment entitlement. The Contractor may not request payment from the Government of any amount withheld or retained in accordance with paragraph (d) of this clause until such time as the Contractor has determined and certified to the Contracting Officer that the subcontractor is entitled to the payment of such amount.

    (i) Prime-subcontractor disputes. A dispute between the Contractor and subcontractor relating to the amount or entitlement of a subcontractor to a payment or a late payment interest penalty under a clause included in the subcontract pursuant to paragraph (c) of this clause does not constitute a dispute to which the Government is a party. The Government may not be interpleaded in any judicial or administrative proceeding involving such a dispute.

    (j) Preservation of prime-subcontractor rights. Except as provided in paragraph (i) of this clause, this clause shall not limit or impair any contractual, administrative, or judicial remedies otherwise available to the Contractor or a subcontractor in the event of a dispute involving late payment or nonpayment by the Contractor or deficient subcontract performance or nonperformance by a subcontractor.

    (k) Non-recourse for prime contractor interest penalty. The Contractor's obligation to pay an interest penalty to a subcontractor pursuant to the clauses included in a subcontract under paragraph (c) of this clause shall not be construed to be an obligation of the Government for such interest penalty. A cost-reimbursement claim may not include any amount for reimbursement of such interest penalty.

    (l) Overpayments. If the Contractor becomes aware of a duplicate payment or that the Government has otherwise overpaid on an invoice payment, the Contractor shall immediately notify the Contracting Officer and request instructions for disposition of the overpayment.

    (End of clause)

    Start Amendment Part

    16. Amend section 52.232-29 by revising the date of the clause; by redesignating paragraph (g) as paragraph (h); by adding a new paragraph (g); and by revising the newly designated paragraph (h) to read as follows:

    End Amendment Part
    Terms for financing of purchases of commercial items.
    * * * * *

    Terms for Financing of Purchases of Commercial Items (Feb 2002)

    * * * * *

    (g) Dates for payment. A payment under this clause is a contract financing payment Start Printed Page 65367and not subject to the interest penalty provisions of the Prompt Payment Act. The designated payment office will pay approved payment requests within 30 days of submittal of a proper request for payment.

    (h) Conflict between terms of offeror and clause. In the event of any conflict between the terms proposed by the offeror in response to an invitation to propose financing terms (52.232-31) and the terms in this clause, the terms of this clause shall govern.

    (End of clause)

    Start Amendment Part

    17. Amend section 52.232-32 by revising the date of the clause and paragraph (c)(2) to read as follows:

    End Amendment Part
    Performance-based payments.
    * * * * *

    Performance-Based Payments (Feb 2002)

    * * * * *

    (c) * * *

    (2) A payment under this performance-based payment clause is a contract financing payment under the Prompt Payment clause of this contract and not subject to the interest penalty provisions of the Prompt Payment Act. The designated payment office will pay approved requests on the ____ [Contracting Officer insert day as prescribed by agency head; if not prescribed, insert “30th”] day after receipt of the request for performance-based payment. However, the designated payment office is not required to provide payment if the Contracting Officer requires substantiation as provided in paragraph (c)(1) of this clause, or inquires into the status of an event or performance criterion, or into any of the conditions listed in paragraph (e) of this clause, or into the Contractor certification. The payment period will not begin until the Contracting Officer approves the request.

    * * * * *
    End Supplemental Information

    [FR Doc. 01-30540 Filed 12-17-01; 8:45 am]

    BILLING CODE 6820-EP-P

Document Information

Published:
12/18/2001
Department:
National Aeronautics and Space Administration
Entry Type:
Rule
Action:
Final rule.
Document Number:
01-30540
Pages:
65353-65367 (15 pages)
Docket Numbers:
FAC 2001-02, FAR Case 1999-023, Item III
RINs:
9000-AI89: FAR Case 99-023, Prompt Payment and the Recovery of Overpayment
RIN Links:
https://www.federalregister.gov/regulations/9000-AI89/far-case-99-023-prompt-payment-and-the-recovery-of-overpayment
Topics:
Government procurement
PDF File:
01-30540.pdf
CFR: (17)
48 CFR 2.101
48 CFR 15.407
48 CFR 32.001
48 CFR 32.007
48 CFR 32.102
More ...