E8-30090. Carbon and Certain Alloy Steel Wire Rod from Canada: Final Results of Antidumping Duty Administrative Review

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On July 10, 2008, the Department of Commerce (Department) published the preliminary results of the administrative review of the antidumping duty order on carbon and certain alloy steel wire rod from Canada. See Notice of Preliminary Results of Antidumping Duty Administrative Review: Carbon and Certain Alloy Steel Wire Rod From Canada, 73 FR 39646 (July 10, 2008) (Preliminary Results). This review covers the period October 1, 2006, through September 30, 2007, for Ivaco Rolling Mills 2004 L.P. and Sivaco Ontario, a division of Sivaco Wire Group 2004 L.P. (referred to collectively as Ivaco).

EFFECTIVE DATE:

December 18, 2008.

FOR FURTHER INFORMATION CONTACT:

Steve Bezirganian or Robert James, AD/CVD Operations, Office 7, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW, Washington, DC 20230; telephone: [phone] or [phone], respectively.

SUPPLEMENTARY INFORMATION:

Background

On July 10, 2008, the Department published the preliminary results of this administrative review of the antidumping duty order on carbon and certain alloy steel wire rod from Canada. See Preliminary Results, 73 FR 39646. Ivaco submitted its case brief on August 11, 2008, and petitioners, ISG Georgetown Inc., Gerdau Ameristeel U.S. Inc., Nucor Steel Connecticut Inc., Keystone Consolidated Industries, Inc., and Rocky Mountain Steel Mills, submitted their rebuttal brief on August 18, 2008. No hearing was requested. The Department extended the deadline for completion of the final results by 35 days, to December 12, 2008. See Carbon and Certain Alloy Steel Wire Rod From Canada: Extension of Time Limit for Final Results of Antidumping Duty Administrative Review, 73 FR 63134 (October 23, 2008).

Period of Review

The period of review is October 1, 2006 through September 30, 2007.

Scope of the Order

The merchandise subject to the order is certain hot-rolled products of carbon steel and alloy steel, in coils, of approximately round cross section, 5.00 mm or more, but less than 19.00 mm, in solid cross-sectional diameter.

Specifically excluded are steel products possessing the above-noted physical characteristics and meeting the Harmonized Tariff Schedule of the United States (“HTSUS”) definitions for (a) stainless steel; (b) tool steel; (c) high nickel steel; (d) ball bearing steel; and (e) concrete reinforcing bars and rods. Also excluded are (f) free machining steel products (i.e., products that contain by weight one or more of the following elements: 0.03 percent or more of lead, 0.05 percent or more of bismuth, 0.08 percent or more of sulfur, more than 0.04 percent of phosphorus, more than 0.05 percent of selenium, or more than 0.01 percent of tellurium).

Also excluded from the scope are 1080 grade tire cord quality wire rod and 1080 grade tire bead quality wire rod. Grade 1080 tire cord quality rod is defined as: (i) Grade 1080 tire cord quality wire rod measuring 5.0 mm or more but not more than 6.0 mm in cross-sectional diameter; (ii) with an average partial decarburization of no more than 70 microns in depth (maximum individual 200 microns); (iii) having no non-deformable inclusions greater than 20 microns and no deformable inclusions greater than 35 microns; (iv) having a carbon segregation per heat average of 3.0 or better using European Method NFA 04-114; (v) having a surface quality with no surface defects of a length greater than 0.15 mm; (vi) capable of being drawn to a diameter of 0.30 mm or less with 3 or fewer breaks per ton, and (vii) containing by weight the following elements in the proportions shown: (1) 0.78 percent or more of carbon, (2) less than 0.01 percent of aluminum, (3) 0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 0.006 percent or less of nitrogen, and (5) not more than 0.15 percent, in the aggregate, of copper, nickel and chromium.

Grade 1080 tire bead quality rod is defined as: (i) Grade 1080 tire bead quality wire rod measuring 5.5 mm or more but not more than 7.0 mm in cross-sectional diameter; (ii) with an average partial decarburization of no more than 70 microns in depth (maximum individual 200 microns); (iii) having no non-deformable inclusions greater than 20 microns and no deformable inclusions greater than 35 microns; (iv) having a carbon segregation per heat average of 3.0 or better using European Method NFA 04-114; (v) having a surface quality with no surface defects of a length greater than 0.2 mm; (vi) capable of being drawn to a diameter of 0.78 mm or larger with 0.5 or fewer breaks per ton; and (vii) containing by weight the following elements in the proportions shown: (1) 0.78 percent or more of carbon, (2) less than 0.01 percent of soluble aluminum, (3) 0.040 percent or less, in the aggregate, of phosphorus and sulfur, (4) 0.008 percent or less of nitrogen, and (5) either not more than 0.15 percent, in the aggregate, of copper, nickel and chromium (if chromium is not specified), or not more than 0.10 percent in the aggregate of copper and nickel and a chromium content of 0.24 to 0.30 percent (if chromium is specified).

For purposes of the grade 1080 tire cord quality wire rod and the grade 1080 tire bead quality wire rod, an inclusion will be considered to be deformable if its ratio of length (measured along the axis—that is, the direction of rolling—of the rod) over thickness (measured on the same inclusion in a direction perpendicular to the axis of the rod) is equal to or greater than three. The size of an inclusion for purposes of the 20 microns and 35 microns limitations is the measurement of the largest dimension observed on a longitudinal section measured in a direction perpendicular to the axis of the rod.

The designation of the products as “tire cord quality” or “tire bead quality” indicates the acceptability of the product for use in the production of tire cord, tire bead, or wire for use in other rubber reinforcement applications such as hose wire. These quality designations are presumed to indicate that these products are being used in tire cord, tire bead, and other rubber reinforcement applications, and such merchandise intended for the tire cord, tire bead, or other rubber reinforcement applications is not included in the scope. However, should petitioners or other interested parties provide a reasonable basis to believe or suspect that there exists a pattern of importation of such products for other than those applications, end-use certification for the importation of such products may be required. Under such circumstances, only the importers of record would normally be required to certify the end use of the imported merchandise.

All products meeting the physical description of subject merchandise that are not specifically excluded are included in this scope. The products subject to this order are currently classifiable under subheadings 7213.91.3011, 7213.91.3015, 7213.91.3092, 7213.91.4500, 7213.91.6000, 7213.99.0030, 7213.99.0090, 7227.20.0000, 7227.90.6010, and 7227.90.6080 of the HTSUS. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this order is dispositive.

Analysis of Comments Received

All issues raised in the case and rebuttal briefs by parties to this administrative review are addressed in the Issues and Decision Memorandum from Gary Taverman, Acting Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, dated December 11, 2008 (Decision Memorandum), which is hereby adopted by this notice. A list of the issues parties have raised and to which we have responded, all of which are in the Decision Memorandum (and, for the level of trade issue, in a separate proprietary document referenced in the Decision Memorandum), is attached to this notice as an appendix. Parties can find a discussion of all public issues raised in this review and the corresponding recommendations in this public memorandum, which is on file in the Central Records Unit in room 1117 of the main Department building. In addition, a complete version of the Decision Memorandum can be accessed directly via the Internet at http://ia.ita.doc.gov/​frn. The paper copy and electronic version of the Decision Memorandum are identical in content.

Changes Since the Preliminary Results

Based on our analysis of the comments received, we have not made any changes to the calculations in our preliminary results.

Final Results of Review

We determine the following weighted-average percentage margin exists for the period October 1, 2006, through September 30, 2007:

Manufacturer/Exporter	Weighted Average Margin
Ivaco Rolling Mills 2004 L.P. / Sivaco Ontario, a division of Sivaco Wire Group 2004 L.P.	2.33 percent

Assessment

The Department will determine, and U.S. Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries, pursuant to section 751(a)(1) of the Tariff Act of 1930, as amended (the Act), and 19 CFR 351.212(b). The Department calculated an assessment rate for each importer of the subject merchandise covered by the review. Upon issuance of the final results of this review, for the importer-specific assessment rate calculated in the final results that is above de minimis (i.e., at or above 0.50 percent), we will issue assessment instructions directly to CBP to assess antidumping duties on appropriate entries by applying the assessment rate to the entered value of the merchandise. Pursuant to 19 CFR 356.8(a), the Department intends to issue assessment instructions to CBP 41 days after the date of publication of these final results of review.

The Department clarified its “automatic assessment” regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). This clarification will apply to entries of subject merchandise during the period of review produced by Ivaco for which Ivaco did not know the merchandise was destined for the United States. In such instances, we will instruct CBP to liquidate unreviewed entries at the 8.11 percent all-others rate if there is no company-specific rate for an intermediary involved in the transaction. See id.

Cash Deposit Requirements

The Department has revoked this order, effective October 29, 2007. See Revocation of Antidumping Duty Order on Carbon and Certain Alloy Steel Wire Rod from Canada, 73 FR 44223 (July 30, 2008). Therefore, there is no need to issue new cash deposit instructions for this administrative review.

Notification to Interested Parties

This notice also serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Department's presumption that reimbursement of the antidumping duties occurred and the subsequent assessment of doubled antidumping duties.

This notice also serves as a reminder to parties subject to administrative protective orders (APOs) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305, which continues to govern business proprietary information in this segment of the proceeding. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.This notice is issued and published in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

Dated: December 11, 2008.

Ronald K. Lorentzen,

Deputy Assistant Secretary for Antidumping and Countervailing Duty Policy and Negotiations.

Appendix Issues and Decision Memorandum

Comment 1: Level of Trade

Comment 2: Offsetting for U.S. Sales that Exceed Normal Value