98-33997. Military Traffic Management Command; Security Rules and Accessorial Service Governing the Movement of Department of Defense Freight Traffic by Rail Carrier  

  • [Federal Register Volume 63, Number 246 (Wednesday, December 23, 1998)]
    [Notices]
    [Pages 71106-71108]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 98-33997]
    
    
    
    [[Page 71106]]
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF DEFENSE
    
    Department of the Army
    
    
    Military Traffic Management Command; Security Rules and 
    Accessorial Service Governing the Movement of Department of Defense 
    Freight Traffic by Rail Carrier
    
    AGENCY: Military Traffic Management Command (MTMC), DOD.
    
    ACTION: Final notice (Rail Security Policy Change).
    
    -----------------------------------------------------------------------
    
    SUMMARY: The Military Traffic Management Command is changing rail 
    security policy in the Military Traffic Management Command Freight 
    Traffic Rules Publication No. 10 (MFTRP No. 10). The addition of Item 
    110 combines two existing transportation protective services, Tank 
    Surveillance Service and Rail Surveillance Service, into a new service, 
    i.e., Rail Inspection Service, which clarifies where and under what 
    circumstances Arms, Ammunition and Explosives; Tanks; Wheeled Vehicles; 
    and other Sensitive items are protected while being shipped by rail. 
    The addition of Item 115 establishes and defines a tracking service 
    mandatory for all rail movement.
    
    EFFECTIVE DATE: April 1, 1999.
    
    ADDRESSES: Headquarters, Military Traffic Management Command, ATTN: 
    MTOP-T, 5611 Columbia Pike, Falls Church, VA 22041-5050.
    
    FOR FURTHER INFORMATION CONTACT:
    Mr. Mark Gerade, e-mail geradem@baileys-emh5.army.mil or Mr. Robert 
    Jones, jonesr@baileys-emh5.army.mil, Headquarters, Military Traffic 
    Management Command, ATTN: MTOP-OP, 5611 Columbia Pike, Falls Church, VA 
    22041-5050, telephone (703) 681-6109/6089.
    
    SUPPLEMENTARY INFORMATION:
    
    Background
    
        The Military Traffic Management Command undertook an initiative to 
    enhance rail security in 1994 in an effort to reduce loss and theft of 
    military shipments. Over the past several years, MTMC has held three 
    meetings involving shippers and carriers, briefed the proposal at two 
    Government Rail Committee Meetings, attended special Association of 
    American Railroads-sponsored videoteleconferences, and participated in 
    three on-the-ground meetings with major railroads to discuss MTMC's 
    draft publication. A number of issues have been raised and successfully 
    resolved to enhance the viability of the publication. The notice of 
    proposed changes was published for public comment in the Federal 
    Register Vol 61, No. 177, pages 47894-47897, September 11, 1996. No 
    comments were received. The Military Traffic Management Command Freight 
    Traffic Rules Publication No. 10 (MFTRP No. 10) is changed to read as 
    follows.
    
    Item 85--Application
    
        1. The Transportation Protective Services (TPS) set forth in this 
    section applies to rail carriers offering to transport arms; Division 
    1.1, 1.2, and 1.3, ammunition, explosives, fireworks, chemical 
    munitions, and other commodities which may require physical security 
    protection while in transit.
        2. When a TPS service is required on shipments moving TOFC/COFC 
    service, rail carriers will ensure the appropriate motor TPS applicable 
    to the highway portion incident to the TOFC/COFC movement is provided. 
    The motor TPS is set forth in Section 2 of MTMC Freight Traffic Rules 
    Publication No. 1A (MFTRP No. 1A). Only MTMC approved munitions motor 
    carriers may be used to transport shipments over the highway.
        3. Timely is defined in terms of immediate notification of delivery 
    and advising the government not later than two hours after a serious 
    accident or incident.
        4. Inspectors will be a railroad police officer, railroad employee 
    (trained) other than police, or instructed personnel (trained), which 
    could include contract security firms designated by the carrier to 
    inspect the rail car(s).
        [A person is considered ``trained and instructed'' when he or she 
    is employed by the railroad or the terminal involved in the handling of 
    shipments, has been trained by the railroad/terminal to inspect rail 
    car(s), is aware of the sensitivity of material moving under RI, and is 
    knowledgeable of safety, security and emergency procedures that must be 
    followed. Trained and instructed contract personnel may be used to 
    conduct inspections of rail car(s) but must meet the same criteria as 
    personnel designated by the carrier to inspect rail car(s).]
        5. When carrier has identified areas which are known trouble spots, 
    shipments will be routed to avoid these areas or, if unavoidable, be 
    expedited through these areas.
        6. Shippers are not required to but should take into consideration 
    the following damage and loss prevention measures to ensure the 
    protection of Department of Defense Cargo:
        a. Damage prevention measures of military vehicles are as follows:
        (1) Face wheeled-vehicles rearward on the train, roll down side 
    windows, and lower windshields that can be lowered.
        (2) Turn side mirrors inward.
        (3) Protect open glass with plywood, cardboard, or a double layer 
    of bubble wrap (prioritized by level of protection afforded, cost 
    versus benefit must be evaluated).
        (4) Properly document all vehicle damage at origin and destination.
        b. Loss prevention measures for sensitive items in containers are 
    as follows:
        (1) Place containers, including CONEXs, door-to-door to block 
    access.
        (2) Order flatcars that will accommodate door-to-door placement of 
    MILVANs.
        (3) Seek assistance from MTMC commands on technical characteristics 
    of flatcars.
        (4) Store sensitive items, including Night Vision Device's (NVD's), 
    in approved containers only. (Note: NVD's must be provided double 
    barrier protection, i.e., in a locked shipping container inside a 
    locked rail car, trailer, dromedary, CONEX, or MILVAN.)
        (5) An NVD storage case does not equate to one of the double 
    barriers.
        (6) Never place the sensitive item packing list on the outside of 
    the containers, trailers, or rail cars.
        (7) Contact your local provost marshal/law enforcement officials 
    during loading and/or shipping to ensure proper protection for 
    sensitive items.
    
    Item 95--Rail Armed Guard Surveillance Service (RG) (Note)
    
        1. Definition. Rail Armed Guard Surveillance Service (RG). RG is a 
    TPS that provides one armed guard to maintain constant and specific 24-
    hour surveillance on a DOD shipment consisting of one or more cars in 
    the same train.
        2. Annotation. RG will only be furnished upon request of the 
    shipper by annotation in blocks 15 & 31 on the bill of lading as 
    follows: ``Rail Armed Guard Surveillance Service (RG) Requested''
        3. Requirement. Carriers providing RG must:
        a. Perform all functions of Rail Inspection Service (RI) as 
    specified in Item 110.
        b. Maintain surveillance at all rail stops as well as in yards and 
    terminals where train stops. All security seals and/or locks will be 
    checked at all stops and documented using the format set forth in the 
    NOTE at the end of this Item.
        c. Ensure guards will be augmented as required to maintain 
    continuous observation on rail car(s) transporting shipment(s).
    
    [[Page 71107]]
    
        d. Ensure guards do not leave shipment until properly relieved by 
    another guard or consignee at destination.
        e. Inspect the refrigeration/heating units of environmentally 
    controlled cars, trailers or containers in transit at least twice 
    during each 24-hour period for the purpose of maintaining temperature 
    requirements. Inspections must be at least 10 hours apart. The 
    temperature requirement for each shipment will be annotated on the bill 
    of lading by the shipper. Immediately following each required 
    inspection, an authorized carrier representative will make a report by 
    telephone to the consignee and the appropriate toll free 800-Hotline 
    telephone number (see Item 180), furnishing the information called for 
    in the sample format show in NOTE of this Item. The cost of telephone 
    calls to other than toll free numbers will not be borne by the 
    Government.
        f. It may be more advantageous in some circumstances to have a 
    railroad police officer, railroad employees (trained) other than 
    police, or instructed personnel (trained), which could include contract 
    security firm personnel, ride in a separate motor vehicle paralleling 
    the train, rather than on the train. The railroad has the option to 
    decide which is more secure.
        4. Notification. If suspicion of tampering or sabotage exists at 
    any point during movement of the shipment, the railroad special agents 
    office will immediately notify either the consignee, HQMTMC at (703) 
    681-6125, or one of the 24-hour MTMC 800-Hotline telephone numbers (See 
    Item 180). If necessary, the carrier will solicit the aid of local, 
    state or federal law enforcement officials to secure the shipment.
        5. Charges. When requested by the shipper, the rail carrier(s) will 
    provide RG on shipments of single car loads or shipments of multiple 
    car loads in the same train at a charge of RG(1) $________ per highway 
    mile per car or in lieu thereof a flat charge of RG(2) $________ per 
    car. The charges will apply from point of origin to point of 
    destination and will be in addition to all other charges for 
    transportation of shipments requiring this service.
        In Section F(1) of the tender, carriers will complete either RG(1) 
    or RG(2), but not both.
    
        Note: Information to be furnished per instructions in paragraph 
    2e above:
    1. Person and carrier reporting:---------------------------------------
    
    2. City or place of inspection:----------------------------------------
    
    3. Local arrival time at checkpoint:-----------------------------------
    
    4. Local time inspection was performed:--------------------------------
    
    5. Interior temperature of the equipment:------------------------------
    
    6. Approximate outside temperature:------------------------------------
    
    7. Government seals intact: Yes (  ) No (  )---------------------------
    
    8. Replaced by seal number:--------------------------------------------
    
    9. Air conditioning unit working: Yes (  ) No (  )---------------------
    
    10. Arrangement made for repair:---------------------------------------
    
    11. Entries made on log attached to equipment: Yes (  ) No (  )--------
    
    12. Estimated or actual time or departure from checkpoint:-------------
    
    13. Estimated time of arrival at next checkpoint or destination:-------
    
    Item 100--Rail Surveillance Service (RS)
    
        Deleted.
    
    Item 105--Tank Surveillance Service (TS)
    
        Deleted.
    
    Item 110--Rail Inspection Service (RI)
    
        Rail Inspection Service (RI) replaces two rail security services, 
    Rail Surveillance Service (RS) and Tank Surveillance Service (TS). 
    Greater Security Service (GS), as defined in item 90, will still be 
    maintained for all shipments. GS automatically includes Military 
    Traffic Expediting Service (MX) (See Item 115). RI service incorporates 
    the inspection and/or surveillance requirements of each of the services 
    RI replaced. 1. Definition. Rail Inspection Service (RI) is performed 
    by rail carriers for intransit protection of sensitive and pilferable 
    items; RI automatically includes MX (See Item 115). Inspection under RI 
    is external only to assure the integrity of the shipment (container or 
    vehicle) and the seals/locking devices. RI is required for the movement 
    of Abrams tanks, and other ground vehicles with sensitive armor, 
    Categories II through IV, and uncategorized (at DOD component 
    headquarters direction); arms; ammunition, and explosive (AA&E); and 
    night vision devices (NVD). RI is optional for vehicle movements and 
    unit or other movements involving pilferable items, such as high value 
    communications and electronics.
        2. Annotation. RI will only be furnished upon request of the 
    shipper by annotation in blocks 15 & 31 on the bill of lading as 
    follows:
        ``Rail Inspection Service (RI) Requested.''
        3. Requirements. Carriers providing RI must:
        a. For all Shipments under RI:
        (1) Automatically includes Military Traffic Expediting Service (MX) 
    (See Item 115).
        (2) Inspect each rail car containing shipments requiring RI. 
    Inspection will be performed by railroad police officer, railroad 
    employees (trained other than police, or instructed personnel (trained) 
    which could include contract security firms designated by the carrier 
    within one hour after train has entered a rail terminal. Reinspection 
    will take place every hour thereafter until the train departs. For 
    shipments located at a working terminal, where carrier personnel are 
    present and can provide continuous observation, hourly inspections are 
    waived provided the train is on an inside track. When hourly 
    inspections are performed, they will be documented.
        (3) Inspections will be required at terminals on arrival and 
    departure and at all interchange points between railroads.
        (4) Documentation of inspections made by railroad police officer, 
    railroad employees (trained) other than police, or instructed personnel 
    (trained), which could include contract security firms, will be 
    available for review within 24 hours of inspection completion.
        (5) While intransit and not in a working terminal, railroad police 
    officer, railroad employees (trained) other than police, or instructed 
    personnel (trained), which could include contract security firms 
    designated by the carrier, will inspect the rail car(s) containing the 
    shipment every hour when a delay is more than 90 minutes.
        (6) Assure complete interchange security procedures are in effect 
    and recorded when transferring the shipment to another railroad, or 
    intermodal carrier, or with the government. Interchange procedures 
    between railroads, intermodal carriers, and with the government are 
    vital to ensure continuity of security. Where needed, a formal 
    Memorandum of Agreement will exist between parties to ensure continuous 
    protection.
        (7) Where feasible, place shipments transiting rail yards in well-
    lighted areas, on an inside track, near the tower, and/or otherwise 
    under the general observation of railroad police officer, railroad 
    employees (trained) other than police, or instructed personnel 
    (trained), which could include contract security firms designated by 
    carrier.
        (8) Notify the consignee in a timely manner of arrival at 
    destination and continue inspections until physical hand-off has 
    occurred.
        (9) Documentation of all inspections will include the following 
    information, as applicable.
        (a) Name of carrier reporting.
        (b) Name of Inspector and his/her signature.
        (c) Time of each inspection or acceptance for continuous 
    observation.
        (d) Actual arrival time at terminal.
    
    [[Page 71108]]
    
        (e) Actual departure time from terminal.
        (f) Condition of conveyance(s) and seals/locking devices.
        b. For Arms, Ammunition, and Explosives (AA&E) and containerized 
    Night Vision Devices (NVD) the carrier is responsible for:
        (1) Inspecting container seals/locks. If found broken, reseal with 
    same or equivalent device. Report broken seals/locks or other security 
    problems with containers to one of the 24-hour MTMC 800-Hotline numbers 
    listed in Item 180.
        (2) Ensuring containers are positioned door-to-door or otherwise 
    placed with door inaccessible.
        (3) If an odd number of containers/MIL VANs, other than one, is 
    loaded on an individual rail car, loading is door-to-door and the 
    remaining container is loaded with the door facing the end of another 
    container/MIL VAN.
        c. For M1 Abrams Tanks the carrier is responsible for:
        (1) Inspections that call for external observation and inspection 
    by railroad police officer, railroad employees (trained) other than 
    police, or instructed personnel (trained), which could include contract 
    security firms, of each vehicle within one hour after it has stopped 
    and at least once each hour during each stop. Documentation supporting 
    hourly checks is subject to review.
        (2) In addition to the requirements in paragraph 3a above, the 
    following inspections will be performed by the carrier to ensure the 
    integrity of the shipment and will be conducted from the ground unless 
    exceptions are noted:
        (a) Ensure tank armor plate, tie downs, or other parts are secure 
    and intact.
        (b) Ensure tank skirts are not damaged and secured with transloc 
    bolts.
        (c) Inspect vehicle openings (driver's hatch, loading hatch) to 
    ensure they are adequately secured (locked and sealed or welded).
        (d) Inspect equipment boxes to ensure exterior integrity of the 
    boxes and that seals/locking devices and tie downs are intact.
        (3) If the armor is penetrated, the shipment will continue to be 
    protected by the carrier in conjunction with an on-the-scene 
    investigation by military representatives.
        (4) Railroad police officer, railroad employees (trained) other 
    than police, or instructed personnel (trained), which could include 
    contract security firms, will concentrate their physical inspection in 
    those areas depicted in the diagram for the M1 Abrams Tank which is 
    found in the Security Classification Guide for M1 Abrams Tank.
        d. For Non-Sensitive Armored/Wheeled Vehicle Inspections 
    (Optional):
        (1) This service may be used at the shipper's option for the 
    movement of armored and wheeled vehicles (excluding the M1 Abrams Tank 
    family of vehicles and certain ground tracked vehicles with sensitive 
    armor, for which RI is mandatory). Inspection calls for the external 
    observation and inspection by railroad police officer, railroad 
    employees (trained) other than police, or instructed personnel 
    (trained), which could include contract security firms of each rail car 
    transporting military vehicles, IAW paragraph a above.
        (2) The following inspections will be performed by the carrier to 
    ensure the integrity of the shipment and will be conducted from the 
    ground unless exceptions are noted:
        (a) Inspect wheeled vehicles for glass damage and all vehicles for 
    signs of pilferage, theft, or serious damage.
        (b) Ensure tie downs are secure and intact.
        (c) Inspect vehicle openings of tanks and tactical vehicles 
    (driver's hatch, loading hatch) to ensure they are adequately secured 
    (locked and sealed or welded).
        (d) Sensitive or pilferable items shipped along with tanks and 
    other tracked vehicles should be in separate, approved containers. The 
    shipper is responsible for securing the vehicle's opening and all 
    containers. The seals/locks devices will be inspected by railroad 
    police officer, railroad employees (trained) other than police, or 
    instructed personnel (trained), which could include contract security 
    firms, to ensure that they are adequately secured.
        4. Reporting Procedures.
        a. The shipper must report shipment information to the Deployment 
    Support Command (DSC) in advance of movement and must include the GS or 
    RI code on GBL.
        b. In the event of any serious accident or incident, suspected or 
    actual tampering and if the carriers believes a threat exists, the 
    carrier will immediately notify either the consignee, HQMTMC at (703) 
    681-6125, or one of the 24-hour MTMC 800-Hotline telephone numbers (See 
    Item 180). If necessary, the carrier will solicit the aid of local, 
    state or federal law enforcement officials to secure the shipment. 
    Damage reporting of serious accidents or incidents will be reported 
    within two hours following occurrence.
        c. If evidence of forced entry or tampering with seals has 
    occurred, the carriers will immediately notify the consignee and MTMC 
    800-Hotline numbers (See Item 180.
        5. Charges. In addition to all rates and charges for 
    transportation, shipments for which RI is provided by carrier at 
    shipper's request will be subject to a charge of RI (1) $________ per 
    highway mile per car (See Item 75), subject to a minimum charge of 
    RI(2) $________ per car, or in lieu thereof a flat charge of RI(3) 
    $________ per car. In Section F(1) of the tender, carriers will 
    complete either RI(1) and RI(3) but not more than one. Charges will be 
    all-inclusive and apply from origin to final destination.
    
    Item 115--Military Traffic Expediting Service (MX)
    
        1. Military Traffic Expediting Service (MX) is an automated 
    tracking service provided by the carrier for military carload shipments 
    of unclassified cargo, which do not require seals or terminal 
    inspections. This service uses a central computer linked with member 
    railroads to track carload shipments and is capable of reporting on 
    single line and joint-line movements.
        2. MX service will automatically be provided by the carrier without 
    cost. However, before the service can be initiated, it is the 
    responsibility of the shipper to promptly communicate the shipment 
    information to the Deployment Support Command routing office. This 
    information is to include: origin, stop-offs (if applicable), final 
    destination, commodity, date of shipment, date shipment is due at 
    destination, route order number, routing with junction points, GBL 
    number, and rail car initials (i.e., DODX 40000).
    Francis A Galluzzo,
    Assistant Deputy Chief of Staff For Transportation Services.
    [FR Doc. 98-33997 Filed 12-22-98; 8:45 am]
    BILLING CODE 3710-08-M
    
    
    

Document Information

Effective Date:
4/1/1999
Published:
12/23/1998
Department:
Army Department
Entry Type:
Notice
Action:
Final notice (Rail Security Policy Change).
Document Number:
98-33997
Dates:
April 1, 1999.
Pages:
71106-71108 (3 pages)
PDF File:
98-33997.pdf