-
Start Preamble
CFR Correction
In Title 29 of the Code of Federal Regulations, Part 1900 to § 1910.999, revised as of July 1, 2014, in § 1910.36, on page 151, revise the Note to paragraph (b), and on page 152, revise the Note to paragraph (f), to read as follows:
Design and construction requirements for exit routes.* * * * *(b) * * *
Note to paragraph (b) of this section:
For assistance in determining the number of exit routes necessary for your workplace, consult NFPA 101-2009, Life Safety Code, or IFC-2009, International Fire Code (incorporated by reference, see § 1910.6).
* * * * *(f) * * *
Note to paragraph (f) of this section:
Information regarding the “Occupant load” is located in NFPA 101-2009, Life Safety Code, and in IFC-2009, International Fire Code (incorporated by reference, see § 1910.6).
* * * * *[FR Doc. 2014-30196 Filed 12-22-14; 8:45 am]
BILLING CODE 4510-26-P
Document Information
- Published:
- 12/23/2014
- Department:
- Occupational Safety and Health Administration
- Entry Type:
- Rule
- Document Number:
- 2014-30196
- Pages:
- 76897-76897 (1 pages)
- PDF File:
- 2014-30196.pdf
- Supporting Documents:
- » Letter to Richard G. Stoll, Foley & Lardner, LLP, regarding petition to modify the Bloodborne Pathogens Standard
- » Petition for Rulemaking - Revision of Alloy Steel Chain Sling Provisions in 29 CFR 1910.184
- » NIOSH Comments, OMB 1218-0085
- » Editorial Boards - Basic Rules and Procedures for Working with Chemicals
- » Comparison of 2006 The International Fire Code (IFC) and OSHA Subpart E (Means of Egress)- SBS IFC 2006 - SUBPART E
- » Comparison of the 2006 NFPA 101 and OSHA Subpart E (Means of Egress)SBS NFPA 101 2006 - SUBPART E