96-32683. Guidance for the Content of Premarket Submissions for Medical Devices Containing Software; Availability  

  • [Federal Register Volume 61, Number 248 (Tuesday, December 24, 1996)]
    [Notices]
    [Pages 67837-67838]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 96-32683]
    
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF HEALTH AND HUMAN SERVICES
    [Docket No. 96D-0368]
    
    
    Guidance for the Content of Premarket Submissions for Medical 
    Devices Containing Software; Availability
    
    AGENCY: Food and Drug Administration, HHS.
    ACTION: Notice.
    
    -----------------------------------------------------------------------
    
    SUMMARY: The Food and Drug Administration (FDA) is announcing the 
    availability of a draft guidance entitled ``ODE Guidance for the 
    Content of Premarket Submissions for Medical Devices Containing 
    Software.'' The draft guidance is not final nor is it in effect at this 
    time. This guidance is available for comment and will eventually 
    replace the ``Reviewer Guidance for Computer Controlled Medical Devices 
    Undergoing 510(k) Review'' that was issued in 1991 (the 1991 draft 
    guidance). This new draft guidance discusses the key elements reviewers 
    look for in premarket medical device software submissions and provides 
    a common baseline from which both manufacturers and scientific 
    reviewers can operate. The new draft guidance is intended to provide 
    applicants specific additional directions regarding information and 
    data that should be submitted to FDA in a 510(k) submission for medical 
    device software.
    
    DATES: Submit written comments by January 23, 1997.
    ADDRESSES: Submit written requests for single copies of the draft 
    guidance entitled ``ODE Guidance for the Content of Premarket 
    Submissions for Medical Devices Containing Software'' to the Division 
    of Small Manufacturers Assistance (HFZ-220), Center for Devices and 
    Radiological Health (CDRH), Food and Drug Administration, 5600 Fishers 
    Lane, Rockville, MD 20857, 301-443-0806 (outside MD 1-800-638-2041). 
    Send two self-addressed adhesive labels to assist that office in 
    processing your requests. Persons with access to the Internet may 
    obtain the new draft guidance via the World Wide Web at http://
    www.fda.gov/cdrh/ode/dtswguid.html. The new draft guidance may also be 
    obtained by calling the CDRH Facts-On-Demand system at 800-899-0381 or 
    301-827-0111 from a fax machine with a touch-tone telephone attached or 
    built in. At the first voice prompt press 1 to access DSMA Facts, at 
    the second voice prompt press 2, and enter Shelf__ 616 followed by the 
    pound sign (#). Then follow the remaining voice prompts to complete 
    your request. Submit written comments on ``ODE Guidance for the Content 
    of Premarket Submissions for Medical Devices Containing Software'' to 
    the Dockets Management Branch (HFA-305), Food and Drug Administration, 
    12420 Parklawn Dr., rm. 1-23, Rockville, MD 20857. Requests and 
    comments should be identified with the docket number found in brackets 
    in the heading of this document. A copy of ``ODE Guidance for the 
    Content of Premarket Submissions for Medical Devices Containing 
    Software'' and received comments are available for public examination 
    in the Dockets Management Branch between 9 a.m. and 4 p.m., Monday 
    through Friday.
    
    FOR FURTHER INFORMATION CONTACT: Joanna H. Weitershausen, Center for 
    Devices and Radiological Health (HFZ-450), Food and Drug 
    Administration, 9200 Corporate Blvd., Rockville, MD 20850, 301-443-
    8609.
    
    SUPPLEMENTARY INFORMATION:  The final version of this guidance will 
    provide guidance concerning regulatory review of premarket medical 
    device software submissions under section 510(k) of the Federal Food, 
    Drug, and Cosmetic Act (21 U.S.C. 360(k)) (the act). The new draft 
    guidance has been developed to clarify the existing guidance. Through 
    using the 1991 draft guidance for the last 4 years, FDA has gained 
    experience in applying guidance to 510(k) submissions for medical 
    devices using software. Comments were received from both manufacturers 
    and scientific reviewers and have been incorporated into the new draft 
    guidance. By clarifying the guidance, the agency hopes to receive a 
    larger percentage of complete premarket submissions upon submittal. 
    This will avoid the need for additional information requests which are 
    time consuming for both FDA and manufacturers. In addition, the 
    guidance has been updated to be consistent with emerging international 
    consensus standards such as IEC 601-1-4 and ISO 9000.
        The process for determining the level of concern (i.e., the 
    severity of risk that a device could permit or inflict on a patient or 
    operator as a result of latent failures, design flaws, or using the 
    device) for medical device software, as discussed in the 1991 draft 
    guidance, caused confusion for both FDA scientific reviewers and the 
    medical device industry. Section 3 of the new draft guidance updates 
    this process. However, the agency realizes that other
    
    [[Page 67838]]
    
    options exist; these options are identified in Attachment 2 of a letter 
    included with the new draft guidance. Comments on the new draft 
    guidance should indicate and explain the option(s) preferred.
        On May 17, 1995, the new draft guidance was presented at the 
    Indiana Medical Device Manufacturers Council seminar. This seminar 
    focused on the development of medical device software in a regulated 
    environment. The new draft guidance was again presented on September 
    21, 1995, at the 19th Annual Regulatory Affairs Professional Society 
    Exhibition and Conference.
        The intent of the final version of this guidance will be to provide 
    applicants specific additional directions regarding information and 
    data that should be submitted to FDA in a 510(k) submission for medical 
    device software.
        This guidance, when finalized, will apply to all software, which 
    includes embedded software, operator assisted software, and software 
    accessories to medical devices. The new draft guidance excludes pure 
    hospital information systems and manufacturing process control 
    software.
        Although this guidance does not create or confer any rights on or 
    for any person and does not operate to bind the agency in any way, it 
    does represent FDA's current thinking on the content of premarket 
    submissions for medical devices containing software.
        Interested persons may, on or before January 23, 1997, submit to 
    the Dockets Management Branch (address above) written comments on the 
    ``ODE Guidance for the Content of Premarket Submission for Medical 
    Devices Containing Software.'' Comments should: (1) Refer to specific 
    line numbers, sections, and page numbers in the document; (2) discuss 
    the issue; and (3) propose a recommended change. Two copies of any 
    comments are to be submitted, except that individuals may submit one 
    copy. Comments are to be identified with the docket number found in 
    brackets in the heading of this document. The new draft guidance and 
    received comments may be seen in the Dockets Management Branch between 
    9 a.m. and 4 p.m., Monday through Friday. Received comments will be 
    considered in determining whether further revisions to the draft 
    guidance are warranted.
    
        Dated: December 13, 1996.
    William B. Schultz,
    Deputy Commissioner for Policy.
    [FR Doc. 96-32683 Filed 12-23-96; 8:45 am]
    BILLING CODE 4160-01-F
    
    
    

Document Information

Published:
12/24/1996
Department:
Health and Human Services Department
Entry Type:
Notice
Action:
Notice.
Document Number:
96-32683
Dates:
Submit written comments by January 23, 1997.
Pages:
67837-67838 (2 pages)
Docket Numbers:
Docket No. 96D-0368
PDF File:
96-32683.pdf