[Federal Register Volume 63, Number 233 (Friday, December 4, 1998)]
[Rules and Regulations]
[Pages 66979-66980]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-32097]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Federal Aviation Administration
14 CFR Part 39
[Docket No. 96-NM-172-AD; Amendment 39-10544; AD 98-11-19]
RIN 2120-AA64
Airworthiness Directives; Airbus Model A310 and A300-600 Series
Airplanes
AGENCY: Federal Aviation Administration, DOT.
ACTION: Final rule; correction.
-----------------------------------------------------------------------
SUMMARY: This document corrects a typographical error that appeared in
airworthiness directive (AD) 98-11-19 that was published in the Federal
Register on May 28, 1998 (63 FR 29096). The typographical error in the
applicability statement of the AD resulted in a reference to an engine
model that does not exist. This AD is applicable to certain Airbus
Model A310 and A300-600 series airplanes. This AD requires a visual
inspection to detect cracks in the aft mount beam assembly of the
engine; and replacement of any cracked beam with a new beam or beam
assembly; and a fluorescent penetrant inspection to detect cracks in
the aft mount beam assembly of the engine, and various follow-on
actions.
DATES: Effective July 2, 1998.
FOR FURTHER INFORMATION CONTACT: Norman B. Martenson, Manager,
International Branch, ANM-116, FAA, Transport Airplane Directorate,
1601 Lind Avenue, SW., Renton, Washington 98055-4056; telephone (425)
227-2110; fax (425) 227-1149.
SUPPLEMENTARY INFORMATION: Airworthiness Directive (AD) 98-11-19,
amendment 39-10544, applicable to certain Airbus Model A310 and A300-
600 series airplanes, was published in the Federal Register on May 28,
1998 (63 FR 29096). That AD requires a visual inspection to detect
cracks in the aft mount beam assembly of the engine, and replacement of
any cracked beam with a new beam or beam assembly. That AD also
requires a fluorescent penetrant inspection to detect cracks in the aft
mount beam assembly of the engine, and various follow-on actions.
As published, that AD contained a typographical error in the
applicability statement: the applicability statement indicated that the
AD is applicable to
[[Page 66980]]
Model A310 and A300-600 series airplanes, equipped with Pratt & Whitney
engines of various models, including Model PW4151. The designation
should be Model PW4152. The engine model designated PW4151 in the
applicability statement of the published AD does not exist.
Since no other part of the regulatory information has been changed,
the final rule is not being republished.
The effective date of this AD remains July 2, 1998.
Sec. 39.13 [Corrected]
On page 29097, in the second column, the applicability statement of
AD 98-11-19 is corrected to read as follows:
* * * * *
``Applicability: Model A310 and A300-600 series airplanes, equipped
with Pratt & Whitney Model JT9D-7R4D1, JT9D-7R4E1, JT9D-7R4H1, PW4152,
PW4156A, or PW4158 engines; certificated in any category.''
* * * * *
Issued in Renton, Washington, on November 25, 1998.
Darrell M. Pederson,
Acting Manager, Transport Airplane Directorate, Aircraft Certification
Service.
[FR Doc. 98-32097 Filed 12-3-98; 8:45 am]
BILLING CODE 4910-13-U
