E8-28694. Agency Information Collection Activities; Submission for Office of Management and Budget Review; Comment Request; Food Contact Substances Notification System

AGENCY:

Food and Drug Administration, HHS.

ACTION:

Notice.

SUMMARY:

The Food and Drug Administration (FDA) is announcing that a proposed collection of information has been submitted to the Office of Management and Budget (OMB) for review and clearance under the Paperwork Reduction Act of 1995.

DATES:

Fax written comments on the collection of information by January 5, 2009.

ADDRESSES:

To ensure that comments on the information collection are received, OMB recommends that written comments be faxed to the Office of Information and Regulatory Affairs, OMB, Attn: FDA Desk Officer, FAX: [phone], or e-mailed to [e-mail]. All comments should be identified with the OMB control number 0910-0495. Also include the FDA docket number found in brackets in the heading of this document.

FOR FURTHER INFORMATION CONTACT:

Jonna Capezzuto, Office of Information Management (HFA-710), Food and Drug Administration, 5600 Fishers Lane, Rockville, MD 20857, 301-796-3794.

SUPPLEMENTARY INFORMATION:

In compliance with 44 U.S.C. 3507, FDA has submitted the following proposed collection of information to OMB for review and clearance.

Food Contact Substances Notification System—(OMB Control Number 0910-0495—Extension)

Section 409(h) of the Federal Food, Drug, and Cosmetic Act (the act) (21 U.S.C. 348(h)) establishes a premarket notification process for food contact substances. Section 409(h)(6) of the act defines a “food contact substance” as “any substance intended for use as a component of materials used in manufacturing, packing, packaging, transporting, or holding food if such use is not intended to have any technical effect in such food.” Section 409(h)(3) of the act requires that the notification process be used for authorizing the marketing of food contact substances except when: (1) FDA determines that the submission and premarket review of a food additive petition (FAP) under section 409(b) of the act is necessary to provide adequate assurance of safety or (2) FDA and the manufacturer or supplier agree that an FAP should be submitted. Section 409(h)(1) of the act requires that a notification include: (1) Information on the identity and the intended use of the food contact substance and (2) the basis for the manufacturer's or supplier's determination that the food contact substance is safe under the intended conditions of use.

Sections 170.101 and 170.106 of FDA's regulations (21 CFR 170.101 and 170.106) specify the information that a notification must contain and require that: (1) A food contact notification (FCN) include FDA Form 3480 entitled “Notification for New Use of a Food Contact Substance” and (2) a notification for a food contact substance formulation include FDA Form 3479 entitled “Notification for a Food Contact Substance Formulation.” These forms will serve to summarize pertinent information in the notification. FDA believes that these forms will facilitate both preparation and review of notifications because the forms will serve to organize information necessary to support the safety of the use of the food contact substance. The burden of filling out the appropriate form has been included in the burden estimate for the notification.

Section 171.1 of FDA's regulations (21 CFR 171.1) specifies the information that a petitioner must submit in order to: (1) Establish that the proposed use of an indirect food additive is safe and (2) secure the publication of an indirect food additive regulation in parts 175 through 178 (21 CFR parts 175 through 178). Parts 175 through 178 describe the conditions under which the additive may be safely used.

In addition, FDA's guidance document entitled “Use of Recycled Plastics in Food Packaging: Chemistry Considerations” provides assistance to manufacturers of food packaging in evaluating processes for producing packaging from post-consumer recycled plastic. The recommendations in the guidance address the process by which manufacturers certify to FDA that their plastic products are safe for food contact.

Description of Respondents: Manufacturers of food contact substances.

In the Federal Register of August 27, 2008 (73 FR 50628), FDA published a 60-day notice requesting public comment on the information collection provisions. No comments were received.

FDA estimates the burden of this collection of information as follows:

Table 1.—Estimated Annual Reporting Burden¹

21 CFR Section	Form No.	No. of Respondents	Annual Frequency per Response	Total Annual Responses	Hours per Response	Total Hours
170.1062 (Category A)	FDA 3479	5	1	5	2	10
170.1013,7 (Category B)	FDA 3480	5	1	5	25	125
170.1014,7 (Category C)	FDA 3480	5	2	10	120	1,200
170.1015,7 (Category D)	FDA 3480	33	2	66	150	9,900
170.1016,7 (Category E)	FDA 3480	30	1	30	150	4,500
171.1 Indirect Food Additive Petitions		2	2	2	10,995	21,990
Guidance, “Use of Recycled Plastics in Food Packaging: Chemistry Considerations”		10	1	10	25	250
Total						37,975
1 There are no capital costs or operating and maintenance costs associated with this collection of information.
2 Notifications for food contact substance formulations and food contact articles. These notifications require the submission of FDA Form 3479 (“Notification for a Food Contact Substance Formulation”) only.
3 Duplicate notifications for uses of food contact substances.
4 Notifications for uses that are the subject of exemptions under 21 CFR 170.39 and very simple food additive petitions.
5 Notifications for uses that are the subject of moderately complex food additive petitions.
6 Notifications for uses that are the subject of very complex food additive petitions.
7 These notifications require the submission of FDA Form 3480.

These estimates are based on FDA's experience with the food contact substances notification system. Based on input from industry sources, FDA estimates that approximately five respondents will submit one notification annually for food contact substance formulations (Form FDA 3479), for a total of five responses. FDA estimates the reporting burden to be 2.0 hours per response, for a total burden of 10 hours. FDA also has included five expected duplicate submissions in the second row of table 1 of this document. FDA expects that the burden for preparing these notifications primarily will consist of the manufacturer or supplier filling out FDA Form 3480, verifying that a previous notification is effective and preparing necessary documentation. Thus, FDA estimates that five respondents will submit one such submission annually, for a total of five responses. FDA estimates the reporting burden to be 25.0 hours per response, for a total burden of 125 hours.

Based on the submissions received, FDA identified three other tiers of FCNs that represent escalating levels of burden required to collect information (denoted as Categories C, D, and E in the third, fourth, and fifth rows of table 1 of this document). FDA estimated the median number of hours necessary for collecting information for each type of notification within each of the three tiers based on input from industry sources. FDA estimates that five respondents will submit two Category C submissions annually, for a total of 10 responses. FDA estimates the reporting burden to be 120 hours per response, for a total burden of 1,200 hours. FDA estimates that 33 respondents will submit 2 Category D submissions annually, for a total of 66 responses. FDA estimates the reporting burden to be 150 hours per response, for a total burden of 9,900 hours. FDA estimates that 30 respondents will submit 1 Category E submission annually, for a total of 30 responses.

FDA estimates the reporting burden to be 150 hours per response, for a total burden of 4,500 hours.

FDA estimates that two respondents will submit one indirect food additive petition under § 171.1, for a total of two responses. FDA estimates the reporting burden to be 10,995 hours per response, for a total burden of 21,990 hours.

FDA estimates that 10 respondents will utilize the recommendations in the guidance document entitled “Use of Recycled Plastics in Food Packaging: Chemistry Considerations,” to develop the additional information for one such submission annually, for a total of 10 responses. FDA estimates the reporting burden to be 25 hours per response, for a total burden of 250 hours.

Dated: November 25, 2008.

Jeffrey Shuren,

Associate Commissioner for Policy and Planning.