00-30954. Stainless Steel Bar From India: Final Results of Antidumping Duty New Shipper Review

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

ACTION:

Notice of final results of antidumping duty new shipper review: stainless steel bar From India.

SUMMARY:

On October 4, 2000, the Department of Commerce published the preliminary results of the new shipper review of the antidumping duty order on stainless steel bar from India. This review covers one manufacturer/exporter, Atlas Stainless Corporation. This review covers sales of the subject merchandise to the United States during the period February 1, 1999 through January 31, 2000. We gave interested parties an opportunity to comment on the preliminary results of review but received no comments. The final results do not differ from the preliminary results of review, in which we found that the respondent did not make sales in the United States at prices below normal value.

EFFECTIVE DATE:

December 5, 2000.

FOR FURTHER INFORMATION CONTACT:

Blanche Ziv or Ryan Langan, Office 1, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone [phone] or [phone], respectively.

SUPPLEMENTARY INFORMATION:

The Applicable Statute

Unless otherwise indicated, all citations to the Tariff Act of 1930, as amended (“the Act”), are references to the provisions effective January 1, 1995, the effective date of the amendments made to the Act by the Uruguay Round Agreements Act. In addition, unless otherwise indicated, all citations to the Department of Commerce's (“the Department's”) regulations are to 19 CFR Part 351 (1999).

Background

On October 4, 2000, the Department published in the Federal Register the preliminary results of its new shipper review of stainless steel bar from India. See Preliminary Results of the New Shipper Review, 65 FR 59173 (October 4, 2000). We invited parties to comment on our preliminary results of review. We received no comments. The Department has now completed the new shipper review in accordance with section 751 of the Act.

Scope of Review

Imports covered by this review are shipments of stainless steel bar (“SSB”). SSB means articles of stainless steel in straight lengths that have been either hot-rolled, forged, turned, cold-drawn, cold-rolled or otherwise cold-finished, or ground, having a uniform solid cross section along their whole length in the shape of circles, segments of circles, ovals, rectangles (including squares), triangles, hexagons, octagons, or other convex polygons. SSB includes cold-finished SSBs that are turned or ground in straight lengths, whether produced from hot-rolled bar or from straightened and cut rod or wire, and reinforcing bars that have indentations, ribs, grooves, or other deformations produced during the rolling process.

Except as specified above, the term does not include stainless steel semi-finished products, cut length flat-rolled products (i.e., cut length rolled products which if less than 4.75 mm in thickness have a width measuring at least 10 times the thickness, or if 4.75 mm or more in thickness having a width which exceeds 150 mm and measures at least twice the thickness), wire (i.e., cold-formed products in coils, of any uniform solid cross section along their whole length, which do not conform to the definition of flat-rolled products), and angles, shapes and sections.

The SSB subject to these orders is currently classifiable under subheadings 7222.10.0005, 7222.10.0050, 7222.20.0005, 7222.20.0045, 7222.20.0075, and 7222.30.0000 of the Harmonized Tariff Schedule of the United States (“HTSUS”). Although the HTSUS subheadings are provided for convenience and customs purposes, our written description of the scope of this order is dispositive.

Final Results of the Review

We received no comments from interested parties on our preliminary results. In addition, we have determined that no changes to our analysis are warranted for purposes of these final results. The weighted-average dumping margin for Atlas for the period February 1, 1999 through January 31, 2000, is as follows:

Manufacturer/exporter	Margin
Atlas Stainless Corporation (“Atlas”)	0.00%

Because the weighted-average dumping margin is zero, we will instruct the Customs Service to liquidate entries made during this review period without regard to antidumping duties for the subject merchandise that Atlas exported.

Cash-Deposit Requirements

The following deposit requirements shall be effective upon publication of this notice of final results of administrative review for all shipments of stainless steel bar from India, entered, or withdrawn from warehouse, for consumption on or after the publication date, as provided for by section 751(a)(1) of the Act: (1) The cash-deposit rate for the reviewed company will be the rate indicated above; (2) for previously investigated or reviewed companies, the cash-deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this or any previous review or the original less-than-fair-value investigation, but the manufacturer is, the cash-deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and (4) the cash-deposit rate for all other manufacturers or exporters will continue to be 12.45 percent, the all-others rate.

These deposit requirements shall remain in effect until publication of the final results of the next administrative review.

This notice serves as a final reminder to importers of their responsibility under 19 CFR 351.402(f) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

This notice also serves as the only reminder to parties subject to administrative protective order (“APO”) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

We are issuing and publishing this determination in accordance with sections 751(a)(1) and 777(i)(1) of the Act, and 19 CFR 351.214.

Dated: November 28, 2000.

Troy H. Cribb,

Assistant Secretary for Import Administration.