[Federal Register Volume 59, Number 234 (Wednesday, December 7, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-29890]
[[Page Unknown]]
[Federal Register: December 7, 1994]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
National Institute of Standards and Technology
[Docket No. 940680-4300]
RIN 6093-AB29
Approval of Federal Information Processing Standards Publication
192, Application Profile for the Government Information Locator Service
(GILS)
AGENCY: National Institute of Standards and Technology (NIST),
Commerce.
ACTION: The purpose of this notice is to announce that the Secretary of
Commerce has approved a new standard, which will be published as FIPS
Publication 192, Application Profile for the Government Information
Locator Service (GILS).
-----------------------------------------------------------------------
SUMMARY: On July 5, 1994, notice was published in the Federal Register
(59 FR 34414) that a Federal Information Processing Standard for
Application Profile for the Government Information Locator Service
(GILS) was being proposed for Federal use.
The written comments submitted by interested parties and other
material available to the Department relevant to this standard were
reviewed by NIST. On the basis of this review, NIST recommended that
the Secretary approve the standard as a Federal Information Processing
Standards Publication, and prepared a detailed justification document
for the Secretary's review in support of that recommendation.
The detailed justification document which was presented to the
Secretary is part of the public record and is available for inspection
and copying in the Department's Central Reference and Records
Inspection Facility, Room 6020, Herbert C. Hoover Building, 14th Street
between Pennsylvania and Constitution Avenues, NW, Washington, DC
20230.
This FIPS contains two sections: (1) An announcement section, which
provides information concerning the applicability, implementation, and
maintenance of the standard; and (2) a specifications section which
deals with the technical requirements of the standard. Only the
announcement section of the standard is provided in this notice.
EFFECTIVE DATE: This standard becomes effective June 30, 1995.
ADDRESSES: Interested parties may purchase copies of this standard,
including the technical specifications section, from the National
Technical Information Service (NTIS). Specific ordering information
from NTIS for this standard is set out in the Where to Obtain Copies
Section of the announcement section of the standard.
FOR FURTHER INFORMATION CONTACT:
Mr. Eliot Christian, (703) 648-7245, U.S. Geological Survey, 802
National Center, Reston, VA 22092.
Dated: November 29, 1994.
Samuel Kramer,
Associate Director.
Proposed Federal Information Processing Standards Publication 192
(Date)
Announcing the Standard for Application Profile for the Government
Information Locator Service (GILS)
Federal Information Processing Standards Publications (FIPS PUBS)
are issued by the National Institute of Standards and Technology (NIST)
after approval by the Secretary of Commerce pursuant to Section 111(d)
of the Federal Property and Administrative Services Act of 1949 as
amended by the Computer Security Act of 1987, Public Law 100-235.
1. Name of Standard. Application Profile for the Government
Information Locator Service (GILS) (FIPS PUB 192).
2. Category of Standard. Software Standard, Information
Interchange.
3. Explanation. This standard describes an application profile for
the Government Information Locator Service (GILS). This application
profile is based primarily on the American National Standard for
Information Retrieval Application Service Definition and Protocol
Specification for Open Systems Interconnection (ANSI/NISO Z39.50-1992),
developed by the National Information Standards Organization (NISO).
The Government Information Locator Service (GILS) is a decentralized
collection of servers and associated information services that will be
used by the public either directly or through intermediaries to find
public information throughout the Federal government.
This GILS Profile specifies the use of ANSI/NISO Z39.50-1992 in
information service applications and provides specifications for the
overall GILS application, including the GILS Core and other aspects of
the GILS server operating in the Internet environment. This GILS
profile will enable GILS client systems to interconnect and to
interoperate with any GILS server. This profile addresses intersystem
interactions and information interchange for the GILS, but does not
specify user interface requirements, the internal structure of
databases that contain GILS Locator Records, or search engine
functionality.
GILS servers will support search and retrieval by accepting a
search query and returning a result set or diagnostic messages. GILS
servers may also support browsing by accepting a well-known search
query and returning a list of Locator Records in brief display format.
Some of the information resources pointed to by GILS Locator
Records, as well as the GILS server itself, may be available
electronically through other communications protocols including the
common Internet protocols that facilitate electronic information
transfer such as remote login (Telnet), File Transfer Protocol (FTP),
and electronic mail. The use of SMTP and MIME protocols or other
communications paths is outside the scope of the GILS Profile.
The GILS Profile was developed by a group of industry and
government experts in ANSI/NISO Z39.50-1992 implementations, system
implementations, and the organization of information. The
specifications included in the GILS Profile reflect the consensus of
this group based on its work and input from a range of stakeholders.
4. Approving Authority. Secretary of Commerce.
5. Maintenance Agency. U.S. Department of the Interior, United
States Geological Survey (USGS).
Questions concerning this standard are to be addressed to the
Maintenance Agency: GILS Program, United States Geological Survey
(USGS), 802 National Center, Reston, VA 22092. Users of this standard
who need to be notified of changes that occur prior to the next
publication of the standard should complete the Change Request Form
provided in this publication and send it to: Standards Processing
Coordinator (ADP), Computer Systems Laboratory, National Institute of
Standards and Technology, Gaithersburg, MD 20899. The NIST will issue
Change Notices on an as-needed basis.
6. Related Documents.
a. Federal Information Resources Management Regulations (FIRMR)
subpart 201-20.303, Standards and subpart 201-39-1002, Federal
Standards.
b. Office of Management and Budget Bulletin 94-________,
Establishment of Government Information Locator Service.
c. American National Standard for Information Retrieval Application
Service Definition and Protocol Specification for Open Systems
Interconnection (ANSI/NISO Z39.50-1992).
d. A list of additional references for the Application Profile is
contained in section 5, References, of the specifications.
7. Objectives. The objectives of the Application Profile for the
GILS are to:
--Enable users to identify, locate, and access or acquire publicly
available Federal information resources, including electronic
information resources.
--Provide a uniform approach to providing information locator services
to the public.
--Enable every agency to establish standards-based network-accessible
locator records.
8. Applicability.
a. This standard is recommended for use by Federal agencies in the
development and establishment of information locators, i.e.,
information resources that identify other information resources,
describe the information available in those resources, and provide
assistance in how to obtain the information.
b. This standard is required for use by Federal agencies in those
information locators that are established and maintained as part of the
Government Information Locator System (GILS) pursuant to the
requirements of OMB Bulletin 94-________ and other applicable, law,
regulation, and policy.
c. The GILS Core requirements of this standard apply to those GILS
locator records which:
--Describe information resources maintained by the Federal government,
--Comply with the defined GILS Core Elements;
--Are mutually accessible through interconnected electronic network
facilities without charge to the direct user; and
--Are designated by the agency to be part of the Federal government
GILS Core, pursuant to OMB Bulletin 94-________.
9. Specifications. The Application Profile for the Government
Information Locator System, (affixed).
10. Implementation. The implementation of this standard involves
three areas of consideration: development and acquisition of GILS
implementations, validation, and interpretations of the standard.
10.1 Development and Acquisition of GILS Implementations. This
standard is effective June 30, 1995.
10.2 Validation. Validation of GILS implementation is not required
at this time. Testing for conformance to this standards is at the
discretion of the agency. Agencies may select the tests to be
administer4ed and the testing organization that administer the tests.
10.3 Interpretation of this standard. Resolution of questions
regarding this standard will be provided by NIST. Questions concerning
the content and specifications should be addressed to: Director,
Computer Systems Laboratory, Attn: FIPS for GILS Interpretation,
National Institute of Standards and Technology, Gaithersburg, MD 20899,
Telephone: (301) 975-2833.
11. Waivers. Under certain exceptional circumstances, the heads of
Federal departments and agencies may approve waivers to Federal
Information Processing Standards (FIPS). The head of such agency may
redelegate such authority only to a senior official designated pursuant
to Section 3506(b) of Title 44, U.S. Code. Waivers shall be granted
only when:
a. Compliance with a standard would adversely affect the
accomplishment of the mission of an operator of a Federal computer
system, or
b. Cause a major adverse financial impact on the operator which is
not offset by Governmentwide savings.
Agency heads may act upon a written waiver request containing the
information detailed above. Agency heads may also act without a written
waiver request when they determine that conditions for meeting the
standard cannot be met. Agency heads may approve waivers only by a
written decision which explains the basis on which the agency head made
the required findings(s). A copy of each such decision, with
procurement sensitive or classified portions clearly identified, shall
be sent to: National Institute of Standards and Technology; Attn: FIPS
Waiver Decisions, Technology Building, Room B-154; Gaithersburg, MD
20899.
In addition, notice of each waiver granted and each delegation of
authority to approve waivers shall be sent promptly to the Committee on
Government Operations of the House of Representatives and the Committee
on Governmental Affairs of the Senate and shall be published promptly
in the Federal Register.
When the determination on a waiver applies to the procurement of
equipment and/or services, a notice of the waiver determination must be
published in the Commerce Business Daily as part of the notice of
solicitation for offers of an acquisition or, if the waiver
determination is made after that notice is published, by amendment to
such notice.
A copy of the waiver, any supporting documents, the document
approving the waiver and any supporting and accompanying documents,
with such deletions as the agency is authorized and decides to make
under 5 U.S.C. Sec. 552(b), shall be part of the procurement
documentation and retained by the agency.
12. Where to Obtain Copies. Copies of this publication are for sale
by the National Technical Information Service, U.S. Department of
Commerce, Springfield, VA 22161. (Sale of the included specifications
document is by arrangement with the United States Geological Survey
(USGS).) When ordering, refer to Federal Information Processing
Standards Publication 192 (FIPSPUB192), and title. Payment may be made
by check, money order, or deposit account.
[FR Doc. 94-29890 Filed 12-6-94; 8:45 am]
BILLING CODE 3510-CN-M
