04-26945. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 18, 2004 to November 9, 2004, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2004-0129 and the specific PMN number or TME number, must be received on or before January 7, 2005.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2004-0129. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is [phone] and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is [phone].

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket/​, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2004-0129. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to [e-mail], Attention: Docket ID Number OPPT-2004-0129 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-2004-0129 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from October 18, 2004 to November 9, 2004, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 80 Premanufacture Notices Received From: 10/18/04 to 11/09/04

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-05-0042	10/19/04	01/16/05	CBI	(S) Polymerization initiator for polyol production	(S) 1,1,3,3-tetramethylbutyl peroxy-2-ethylhexanoate
P-05-0043	10/19/04	01/16/05	CBI	(G) Open, non-dispersive (dyestuff)	(G) Copper phthalocyanine sulfonic acid salt
P-05-0044	10/20/04	01/17/05	Surface Specialties, Inc.	(S) Resin for water based paints	(G) Urethane modified polycarboxylic resin
P-05-0045	10/21/04	01/18/05	Surface Specialties, Inc.	(S) Resin for paints	(G) Hydroxy functional polyacrylate resin
P-05-0046	10/21/04	01/18/05	CBI	(G) Protective films and coatings	(G) 4,4' methylene diphenyl diisocyanate based polyurethane polymer
P-05-0047	10/21/04	01/18/05	Surface Specialties, Inc.	(S) Elasticity agent for printing inks	(G) Stabilized aluminum alcoholate
P-05-0048	10/21/04	01/18/05	CBI	(G) Additive to pigments for automobile paint	(G) Phthalocyanine compound
P-05-0049	10/22/04	01/19/05	CBI	(G) Additive for adhesives	(G) Diglycidyl bisphenol a adduct
P-05-0050	10/22/04	01/19/05	Firmenich Inc.	(S) Isolated intermediate	(S) Benzene, (3,3-dimethoxy-2-methylpropyl)-
P-05-0051	10/25/04	01/22/05	CBI	(G) Laminating adhesive	(G) Polyester-polyurethane resin
P-05-0052	10/25/04	01/22/05	Wacker Silicones a Division of Wacker Chemical Corporation	(S) Additive for plastics and rubbers	(G) Polydimethylsiloxane polymethyl methacrylate polyglycidyl methacrylate graft copolymer
P-05-0053	10/25/04	01/22/05	CBI	(G) Surfactant/dispersant	(G) Formic acid, compound with (chloromethyl)oxirane polymer with alykyldiamine, 4,4′-(1-methylethylidene)bis[phenol] and tetradecyloxirane, acetate (salt)
P-05-0054	10/25/04	01/22/05	CBI	(G) Industrial coatings binder	(G) Neodecanoic acid, 1,6-hexanediylbis[imino(2-hydroxy-3,1-propanediyl)] ester, polymer with (chloromethyl)oxirane, alkyldiamine, 4,4′-(1-methylethylidene)bis[phenol] and 2,2′-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bis[oxira ne], reaction products with diethanolamine, acetates (salts) formates (salts)
P-05-0055	10/25/04	01/22/05	Firmenich Inc.	(S) Isolated intermediate	(S) Benzenepropanal, .alpha.-methyl-
P-05-0056	10/25/04	01/22/05	CBI	(G) Open non-dispersive (cathode additive)	(G) Lanthanum manganese strontium oxide
P-05-0057	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0058	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0059	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0060	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate
P-05-0061	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0062	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0063	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0064	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0065	10/26/04	01/23/05	CBI	(G) Contained use in energy production	(G) Ether amine phosphonate salt
P-05-0066	10/27/04	01/24/05	CBI	(S) Clear wood finishes	(G) Polyester polyurethane
P-05-0067	10/27/04	01/24/05	DIC International (USA), Inc.	(G) Hard coating for plastics	(G) Fatty acids dimers, polymer with alkoxylated phenol, hydroxy ester acrylate, cyclohexyl isocyanate and cyclic carboxylic acid.
P-05-0068	10/27/04	01/24/05	CBI	(G) Fuel additive	(G) Cerium-based organic compound
P-05-0069	10/28/04	01/25/05	CBI	(S) Masonry water repellant coating	(G) Alkyl modified polysiloxane copolymer
P-05-0070	10/28/04	01/25/05	CBI	(S) Masonry water repellant coating	(G) Alkyl modified polysiloxane
P-05-0071	10/28/04	01/25/05	CBI	(G) Industrial structural materials	(G) Telechelic polyacrylates
P-05-0072	10/28/04	01/25/05	CBI	(G) Coating component	(G) Polymer of acrylate and methacrylate esters
P-05-0073	11/01/04	01/29/05	CBI	(G) Destructive use	(G) Substituted maleimide
P-05-0074	11/01/04	01/29/05	CBI	(G) Destructive use	(G) Maleimide urethane oligomer
P-05-0075	11/01/04	01/29/05	CBI	(G) Textile chemical	(G) Perfluoroalkylethyl methacrylate copolymer
P-05-0076	11/01/04	01/29/05	CBI	(G) Destructive use	(G) Substituted maleimide
P-05-0077	11/01/04	01/29/05	Chemical Technologies, LLC	(S) Hydrophilic textile finish	(S) Siloxanes and Silicones, di-me, 3-hydroxypropyl me, ethers with polyethylene glycol and polyethylene glycol mono(2-carboxyethyl) ether, polymers with 1,1′-methylenebis[4-isocyanatocyclohexane]
P-05-0078	11/01/04	01/29/05	KAO Specialties Americas LLC	(S) Emulsifier in metalworking fluids; thickener and foam booster in dishwashing agent and car shampoo	(S) Amides, rape-oil, n-(hydroxyethyl),ethoxylated
P-05-0079	11/02/04	01/30/05	CBI	(G) Closed, non-dispersive; pigment modifier	(G) Potassium salt of substituted arylazo butanamide
P-05-0080	11/03/04	01/31/05	CBI	(S) Lubricant base oil sales	(G) Chemical 1: Paraffinic light base oil
P-05-0081	11/03/04	01/31/05	CBI	(S) Lubricant base oil sales	(G) Paraffinic heavy base oil
P-05-0082	11/03/04	01/31/05	CBI	(S) Diesel blending; note: % of substance expected per use are approximate figures	(G) Hydrotreated middle distillate
P-05-0083	11/03/04	01/31/05	CBI	(S) Sales as refinery feed; refinery feedstock	(G) Light catalytic cracked distillate
P-05-0084	11/03/04	01/31/05	CBI	(S) Diesel blending; note: % of substance expected per use are approximate figures	(G) Hydrocracked light distillate
P-05-0085	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Hydrotreated light distillate
P-05-0086	11/03/04	01/31/05	CBI	(S) Diesel blending; cat cracker feed; note: % of substance expected per use for diesel blending are aproximate figures	(G) Hydrocracked heavy distillate
P-05-0087	11/03/04	01/31/05	Firmenich Inc.	(S) Aroma for use in fragrance mixtures, which in turn are used in perfumes, soaps, cleansers, etc.	(S) Spiro[5.5]undec-8-en-1-ol, 2,2,9,11-tetramethyl-, acetate
P-05-0088	11/03/04	01/31/05	CBI	(S) Refinery feedstock	(G) Branched and linear hydrocarbons
P-05-0089	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Reformate naphtha, full range
P-05-0090	11/03/04	01/31/05	CBI	(S) Refinery feed to catalytic reformer; heavy naphtha sales	(G) Chemical 1: Heavy naphtha
P-05-0091	11/03/04	01/31/05	CBI	(S) Gasoline blending; refinery feed to catalytic reformer	(G) Chemical 2: Hydrocracked heavy naphtha
P-05-0092	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Hydrodesulfurized heavy naphtha
P-05-0093	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Neutralized light naphtha
P-05-0094	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Hydrotreated heavy naphtha
P-05-0095	11/03/04	01/31/05	CBI	(S) Refinery feed to treater	(G) Catalytic cracked heavy naphtha
P-05-0096	11/03/04	01/31/05	CBI	(S) Gasoline blending; light naphtha sales	(G) Chemical 1: Light naphtha
P-05-0097	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Chemical 2: Hydrocracked light naphtha
P-05-0098	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Hydrodesulfurized light naphtha
P-05-0099	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Neutralized light naphtha
P-05-0100	11/03/04	01/31/05	CBI	(S) Production feed to treater	(G) Catalyst cracked light naphtha
P-05-0101	11/03/04	01/31/05	CBI	(S) Gasoline blending	(G) Hydrotreated light naphtha
P-05-0102	11/04/04	02/01/05	CBI	(G) Open non-dispersive (fuel additive)	(G) Polyether polyurethane
P-05-0103	11/05/04	02/02/05	Eastman Kodak Company	(G) Chemical intermediate, destructive use	(G) Halo phenyl amino substituted cyclohexene salt
P-05-0104	11/05/04	02/02/05	Ashland Inc., Environmental Health and Safety	(G) Two-component laminating adhesive designed to reduce the level of aromatic amine migration. It has been recommended by the food and drug administration that food packaging should achieve > 0.7.	(G) Polyurethane prepolymer
P-05-0105	11/05/04	02/02/05	CIBA Specialty Chemicals Corporation	(S) A softener for textile fabrics	(G) Reaction product of alkylcarboxylic acid and substituted ethanol amine acetate salt
P-05-0106	11/05/04	02/02/05	CBI	(S) Polymerization initiator for polvol production	(S) Hexaneperoxoic acid, 2-ethyl-, 1,1,3,3-tetramethylbutyl ester
P-05-0107	11/09/04	02/06/05	CBI	(G) Paper/textile chemical	(G) Perfluoroalkylethyl methacrylate copolymer
P-05-0108	11/09/04	02/06/05	Mitsui Chemicals America, Inc.	(G) Coating resin	(S) 2-propenoic acid, 2-methyl-, polymer with 2-hydroxyethyl 2-methyl-2-propenoate and methyl 2-methyl-2-propenoate, 2,2′-azobis[2-methylpropanenitrile]-initiated
P-05-0109	11/09/04	02/06/05	Degussa Corporation	(S) Moisture curable adhesive	(G) Polymer of cycloaliphatic diisocyanate, aliphatic diol and aliphatic dicarboxylic acid
P-05-0110	11/09/04	02/06/05	Cognis Corporation	(S) Plastic softner	(S) 1,2-benzenedicarboxylic acid, bis(methylcyclohexyl) ester
P-05-0111	11/09/04	02/06/05	CBI	(G) Additive, open, non-dispersive use	(G) Toluylenediisocyanate, reaction product with benzenedimethanamine and methoxypolyethylene glycol
P-05-0112	11/09/04	02/06/05	Kuraray America, Inc.	(S) Organic solvent of polyurethane plastic coating; ingredient of various kinds of paint; organic solvent of polyurethane resin; ingredient of cleaning agent, especially for commercial use; organic solvent for screen ink	(S) 1-butanol, 3-methoxy-3-methyl-, acetate
P-05-0113	11/09/04	02/06/05	CBI	(G) Additive, open, non-dispersive use	(G) Polyethylene-polypropylene glycol, reaction product with octadecylisocyanate
P-05-0114	11/09/04	02/06/05	CBI	(G) Fertilizer	(G) Phosphoric acid, copper (2+) salt (1:1:1) copper hydrogen phosphate
P-05-0115	11/09/04	02/06/05	Cognis Corporation	(G) Solvent for industrial product	(S) Carboxylic acids, C5-9, esters with polyethylene glycol mono-me ether
P-05-0116	11/08/04	02/05/05	CIBA Specialty Chemicals Corporation	(S) A softener for textile fabrics	(G) Reaction product of alkylcarboxylic acid, substituted alkenyl amine with aromatic anhydride acetate salts
P-05-0117	11/09/04	02/06/05	CBI	(G) Fertilizer	(G) Copper ammonium phosphate or phosphoric acid ammonium copper salt
P-05-0118	11/08/04	02/05/05	CBI	(G) Additives for plastics	(G) Metalic salt of benzoate 2-(2-butoxyethoxy)ethyl phosphonate p-tert-butylbenzoate ph phosphonate oleate complexes
P-05-0119	11/08/04	02/05/05	CBI	(S) Emulsifier in emulsion polymerization	(G) Allylpolyalkylenglycolsulfate, ammonium salt
P-05-0120	11/08/04	02/05/05	CBI	(S) Emulsifier in emulsion polymerization	(G) Allylpolyalkylenglycolsulfate, ammonium salt
P-05-0121	11/09/04	02/06/05	Aques Chemical Consulting Group, LLC	(G) Emulsifier	(G) Vinyl acrylic copolymer

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 38 Notices of Commencement From: 10/18/04 to 11/09/04

Case No.	Received Date	Commencement Notice End Date	Chemical
P-04-0383	09/08/04	08/19/04	(G) Hydroxyalkyl carboxylic acid, polymer with alkylamine, alkanediol, alkyldiisocyanate and polyalkyl ether, polyalkylene glycol ether-blocked, compounds with alkylamine
P-02-0221	11/09/04	10/19/04	(G) Polyester/styrene-acrylic grafted resin
P-03-0256	10/28/04	10/18/04	(G) Hydroxyalkylpolyglycolether
P-03-0356	10/18/04	09/24/04	(G) Halogenated substituted mercaptophenyl alkyl ether
P-03-0365	11/09/04	10/08/04	(G) Halogenated substituted benzenesulfonyl chloride
P-03-0552	10/18/04	09/20/04	(G) Amine salt of cyclic carboxylic acid, polymer with hydroxy substituted alkane, branched alkyl diol, alkanediol, alkoxylated triol and alkanetriol.
P-03-0657	10/15/04	10/09/04	(S) Oxirane, methyl-, polymer with oxirane, mono C8-10 alkyl ethers, ethers with 1,2-decanediol(1:1)
P-03-0797	11/04/04	10/14/04	(G) Halogenated heteropolycycle
P-04-0025	10/25/04	09/28/04	(G) Aminated styrenate acrylic salt
P-04-0139	10/19/04	10/04/04	(G) Modified amidoamine
P-04-0144	10/19/04	10/03/04	(G) Modified amidoamine
P-04-0322	10/28/04	10/14/04	(S) 1,3-benzenedicarboxylic acid, polymer with 2,2-dimethyl-1,3-propanediol, 2,5-furandione, 2,2′-oxybis[ethanol] and 1,2-propanediol
P-04-0331	11/09/04	10/09/04	(G) Substituted phenoxy anthraquinone
P-04-0434	10/25/04	09/29/04	(G) Halo sulfonyl substituted alkane
P-04-0442	11/03/04	10/27/04	(G) Reaction product of 4,4′-(1-methylethylidene)bisphenol, polymer with (chloromethyl) oxirane; polyethylene glycol; ethyleneamine; cresyl glycidyl ether
P-04-0484	10/19/04	09/29/04	(G) Rosin modified phenolic resin
P-04-0508	11/04/04	10/20/04	(S) Hexanoic acid, 2-ethyl-, mixed triesters with benzoic acid and trimethylolpropane
P-04-0509	11/04/04	10/20/04	(S) Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and neopentyl glycol
P-04-0510	11/04/04	10/20/04	(S) Hexanoic acid, 2-ethyl-, mixed diesters with benzoic acid and diethylene glycol
P-04-0552	11/05/04	10/22/04	(G) Spiro[isobenzofuran-1(3h),9′-[9h]heteropolycycle]-3-one, 3′-chloro-6′-(2,3-dihydro-1h-indol-1yl)-4,5,6,7-tetrafluoro-
P-04-0553	11/05/04	10/26/04	(G) Spiro[isobenzofuran-1(3h),9′-[9h]heteropolycycle]-3-one, 3′-(2,3-dihydro-1h-indol-1yl)-4,5,6,7-tetrafluoro-6′-[(4-methoxy-2-methylphenyl)amino]-
P-04-0554	11/05/04	10/19/04	(G) Spiro[isobenzofuran-1(3h),9′-[9h]heteropolycycle]-3-one, 3′,6′-dichloro-4,5,6,7-tetrafluoro-
P-04-0555	11/05/04	10/16/04	(G) Spiro[isobenzofuran-1(3h),9′-[9h]heteropolycycle]-3-one, 4,5,6,7-tetrafluoro-3′,6′-dihydroxy-
P-04-0558	11/01/04	10/13/04	(G) Amine neutralized alkyd resin
P-04-0566	11/03/04	10/12/04	(G) Poly[oxy(methyl-1,2-ethanediyl)], .alpha.-hydro-.omega.-hydroxy-, polymer with isocyanate, 2-hydroxyethyl methacrylate-blocked
P-04-0576	10/21/04	09/08/04	(S) Soybean oil, maleated, ester with triethanolamine
P-04-0592	11/09/04	10/12/04	(G) Polyurea thickener
P-04-0628	11/01/04	10/12/04	(G) Spiro[isobenzofuran-1(3h),9′-[9h]heteropolycycle]-3-one, 3′-[(2-methylphenyl)amino]-6′-[(2-methylphenyl)octylamino]-
P-04-0629	11/01/04	10/08/04	(G) Spiro[isobenzofuran-1(3h),9′-[9h]heteropolycycle]-3-one, 3′,6′-bis[(2-methylphenyl)amino]-
P-04-0631	10/18/04	10/06/04	(G) Fatty acid polyester amide
P-04-0645	10/15/04	09/16/04	(G) Amine functional epoxy resin salted with organic acid
P-04-0668	11/08/04	10/08/04	(G) Reactant polymer with the acrylate copolymer of (an isocyanate spices and three spices of acrylate polymer), and the polyurethane acrylate
P-04-0669	10/20/04	09/22/04	(G) Copolymer of mixed alkyl methacrylates and a substituted alkyl methacrylate
P-04-0690	11/03/04	10/30/04	(G) Methyl amino ethyl ether
P-04-0695	11/04/04	11/02/04	(G) Alkanolamine phenolic mannich adduct
P-04-0702	11/03/04	10/12/04	(G) Modified silicone polymer
P-04-0708	11/03/04	10/12/04	(G) Telechelic polyacrylates
P-04-0778	11/05/04	10/28/04	(G) Polyester

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: November 30, 2004.

Vanessa Williams,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.