2010-30986. Stainless Steel Sheet and Strip in Coils From Taiwan: Final Results of Antidumping Duty Administrative Review

AGENCY:

Import Administration, International Trade Administration, Department of Commerce

SUMMARY:

On August 13, 2010, the Department of Commerce (the Department) published the preliminary results of the administrative review of the antidumping duty order on stainless steel sheet and strip in coils (SSSSC) from Taiwan. This review covers twenty producers/exporters of the subject merchandise to the United States. The period of review (POR) is July 1, 2008, through June 30, 2009.

Based on our analysis of the comments received, we have made no changes in the margin calculations. Therefore, the final results do not differ from the preliminary results. The final weighted-average dumping margin for the reviewed firms are listed below in the section entitled “Final Results of Review.”

DATES:

Effective Date: December 9, 2010.

FOR FURTHER INFORMATION CONTACT:

Henry Almond, AD/CVD Operations, Office 2, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone [phone].

SUPPLEMENTARY INFORMATION:

Background

This review covers twenty producers/exporters. The Department selected Chia Far Industrial Factory Co., Ltd. (Chia Far) as the only respondent for individual examination in this administrative review.

On August 13, 2010, the Department published in the Federal Register the preliminary results of administrative review of the antidumping duty order on SSSSC from Taiwan. See Stainless Steel Sheet and Strip in Coils From Taiwan: Preliminary Results and Rescission in Part of Antidumping Duty Administrative Review, 75 FR 49467 (Aug. 13, 2010) (Preliminary Results).

We invited parties to comment on our preliminary results of review. On September 2, 2010, and September 13, 2010, we received new factual information and a case brief, respectively, from Yieh United Steel Corporation (YUSCO). On September 23, 2010, we rejected YUSCO's new factual information as being untimely filed. On October 4, 2010, YUSCO requested that we reconsider our decision to reject its September 2, 2010, submission. On October 5, 2010, we declined to reconsider our decision. No other parties commented on our Preliminary Results.

The Department has conducted this administrative review in accordance with section 751 of Tariff Act of 1930, as amended (the Act).

Scope of the Order

The products covered by the order are certain stainless steel sheet and strip in coils. Stainless steel is an alloy steel containing, by weight, 1.2 percent or less of carbon and 10.5 percent or more of chromium, with or without other elements. The subject sheet and strip is a flat-rolled product in coils that is greater than 9.5 mm in width and less than 4.75 mm in thickness, and that is annealed or otherwise heat treated and pickled or otherwise descaled. The subject sheet and strip may also be further processed (e.g., cold-rolled, polished, aluminized, coated, etc.) provided that it maintains the specific dimensions of sheet and strip following such processing.

The merchandise subject to the order is classified in the Harmonized Tariff Schedule of the United States (HTSUS) at subheadings: 7219.13.00.31, 7219.13.00.51, 7219.13.00.71, 7219.13.00.81, 7219.14.00.30, 7219.14.00.65, 7219.14.00.90, 7219.32.00.05, 7219.32.00.20, 7219.32.00.25, 7219.32.00.35, 7219.32.00.36, 7219.32.00.38, 7219.32.00.42, 7219.32.00.44, 7219.33.00.05, 7219.33.00.20, 7219.33.00.25, 7219.33.00.35, 7219.33.00.36, 7219.33.00.38, 7219.33.00.42, 7219.33.00.44, 7219.34.00.05, 7219.34.00.20, 7219.34.00.25, 7219.34.00.30, 7219.34.00.35, 7219.35.00.05, 7219.35.00.15, 7219.35.00.30, 7219.35.00.35, 7219.90.00.10, 7219.90.00.20, 7219.90.00.25, 7219.90.00.60, 7219.90.00.80, 7220.12.10.00, 7220.12.50.00, 7220.20.10.10, 7220.20.10.15, 7220.20.10.60, 7220.20.10.80, 7220.20.60.05, 7220.20.60.10, 7220.20.60.15, 7220.20.60.60, 7220.20.60.80, 7220.20.70.05, 7220.20.70.10, 7220.20.70.15, 7220.20.70.60, 7220.20.70.80, 7220.20.80.00, 7220.20.90.30, 7220.20.90.60, 7220.90.00.10, 7220.90.00.15, 7220.90.00.60, and 7220.90.00.80. Although the HTSUS subheadings are provided for convenience and customs purposes, the Department's written description of the merchandise under the order is dispositive.

Excluded from the scope of the order are the following: (1) Sheet and strip that is not annealed or otherwise heat treated and pickled or otherwise descaled, (2) sheet and strip that is cut to length, (3) plate (i.e., flat-rolled stainless steel products of a thickness of 4.75 mm or more), (4) flat wire (i.e., cold-rolled sections, with a prepared edge, rectangular in shape, of a width of not more than 9.5 mm), and (5) razor blade steel. Razor blade steel is a flat-rolled product of stainless steel, not further worked than cold-rolled (cold-reduced), in coils, of a width of not more than 23 mm and a thickness of 0.266 mm or less, containing, by weight, 12.5 to 14.5 percent chromium, and certified at the time of entry to be used in the manufacture of razor blades. See Chapter 72 of the HTSUS, “Additional U.S. Note” 1(d).

Also excluded from the scope of the order are certain specialty stainless steel products described below. Flapper valve steel is defined as stainless steel strip in coils containing, by weight, between 0.37 and 0.43 percent carbon, between 1.15 and 1.35 percent molybdenum, and between 0.20 and 0.80 percent manganese. This steel also contains, by weight, phosphorus of 0.025 percent or less, silicon of between 0.20 and 0.50 percent, and sulfur of 0.020 percent or less. The product is manufactured by means of vacuum arc remelting, with inclusion controls for sulphide of no more than 0.04 percent and for oxide of no more than 0.05 percent. Flapper valve steel has a tensile strength of between 210 and 300 ksi, yield strength of between 170 and 270 ksi, plus or minus 8 ksi, and a hardness (Hv) of between 460 and 590. Flapper valve steel is most commonly used to produce specialty flapper valves in compressors.

Also excluded is a product referred to as suspension foil, a specialty steel product used in the manufacture of suspension assemblies for computer disk drives. Suspension foil is described as 302/304 grade or 202 grade stainless steel of a thickness between 14 and 127 microns, with a thickness tolerance of plus-or-minus 2.01 microns, and surface glossiness of 200 to 700 percent Gs. Suspension foil must be supplied in coil widths of not more than 407 mm, and with a mass of 225 kg or less. Roll marks may only be visible on one side, with no scratches of measurable depth. The material must exhibit residual stresses of 2 mm maximum deflection, and flatness of 1.6 mm over 685 mm length.

Certain stainless steel foil for automotive catalytic converters is also excluded from the scope of the order. This stainless steel strip in coils is a specialty foil with a thickness of between 20 and 110 microns used to produce a metallic substrate with a honeycomb structure for use in automotive catalytic converters. The steel contains, by weight, carbon of no more than 0.030 percent, silicon of no more than 1.0 percent, manganese of no more than 1.0 percent, chromium of between 19 and 22 percent, aluminum of no less than 5.0 percent, phosphorus of no more than 0.045 percent, sulfur of no more than 0.03 percent, lanthanum of less than 0.002 or greater than 0.05 percent, and total rare earth elements of more than 0.06 percent, with the balance iron.

Permanent magnet iron-chromium-cobalt alloy stainless strip is also excluded from the scope of the order. This ductile stainless steel strip contains, by weight, 26 to 30 percent chromium, and 7 to 10 percent cobalt, with the remainder of iron, in widths 228.6 mm or less, and a thickness between 0.127 and 1.270 mm. It exhibits magnetic remanence between 9,000 and 12,000 gauss, and a coercivity of between 50 and 300 oersteds. This product is most commonly used in electronic sensors and is currently available under proprietary trade names such as Arnokrome III.^[1]

Certain electrical resistance alloy steel is also excluded from the scope of the order. This product is defined as a non-magnetic stainless steel manufactured to American Society of Testing and Materials specification B344 and containing, by weight, 36 percent nickel, 18 percent chromium, and 46 percent iron, and is most notable for its resistance to high temperature corrosion. It has a melting point of 1,390 degrees Celsius and displays a creep rupture limit of 4 kilograms per square millimeter at 1,000 degrees Celsius. This steel is most commonly used in the production of heating ribbons for circuit breakers and industrial furnaces, and in rheostats for railway locomotives. The product is currently available under proprietary trade names such as Gilphy 36.^[2]

Certain martensitic precipitation-hardenable stainless steel is also excluded from the scope of the order. This high-strength, ductile stainless steel product is designated under the Unified Numbering System as S45500-grade steel, and contains, by weight, 11 to 13 percent chromium, and 7 to 10 percent nickel. Carbon, manganese, silicon and molybdenum each comprise, by weight, 0.05 percent or less, with phosphorus and sulfur each comprising, by weight, 0.03 percent or less. This steel has copper, niobium, and titanium added to achieve aging, and will exhibit yield strengths as high as 1,700 Mpa and ultimate tensile strengths as high as 1750 Mpa after aging, with elongation percentages of 3 percent or less in 50 mm. It is generally provided in thicknesses between 0.635 and 0.787 mm, and in widths of 25.4 mm. This product is most commonly used in the manufacture of television tubes and is currently available under proprietary trade names such as Durphynox 17.^[3]

Finally, three specialty stainless steels typically used in certain industrial blades and surgical and medical instruments are also excluded from the scope of the order. These include stainless steel strip in coils used in the production of textile cutting tools (e.g., carpet knives).^[4] This steel is similar to AISI grade 420 but containing, by weight, 0.5 to 0.7 percent of molybdenum. The steel also contains, by weight, carbon of between 1.0 and 1.1 percent, sulfur of 0.020 percent or less, and includes between 0.20 and 0.30 percent copper and between 0.20 and 0.50 percent cobalt. This steel is sold under proprietary names such as GIN4 Mo. The second excluded stainless steel strip in coils is similar to AISI 420-J2 and contains, by weight, carbon of between 0.62 and 0.70 percent, silicon of between 0.20 and 0.50 percent, manganese of between 0.45 and 0.80 percent, phosphorus of no more than 0.025 percent and sulfur of no more than 0.020 percent. This steel has a carbide density on average of 100 carbide particles per 100 square microns. An example of this product is GIN5 steel. The third specialty steel has a chemical composition similar to AISI 420 F, with carbon of between 0.37 and 0.43 percent, molybdenum of between 1.15 and 1.35 percent, but lower manganese of between 0.20 and 0.80 percent, phosphorus of no more than 0.025 percent, silicon of between 0.20 and 0.50 percent, and sulfur of no more than 0.020 percent. This product is supplied with a hardness of more than Hv 500 guaranteed after customer processing, and is supplied as, for example, GIN6.^[5]

Period of Review

The POR is July 1, 2008, through June 30, 2009.

China Steel Corporation

As we stated in the Preliminary Results, our practice concerning no-shipment respondents has been to rescind the administrative review if the respondent certifies that it had no shipments within the applicable deadline and we have confirmed through our examination of data from U.S. Customs and Border Protection (CBP) that there were no shipments of subject merchandise during the POR. See Antidumping Duties; Countervailing Duties, 62 FR 27296, 27393 (May 19, 1997), and Oil Country Tubular Goods from Japan: Preliminary Results of Antidumping Duty Administrative Review and Partial Rescission of Review, 70 FR 53161, 53162 (Sept. 7, 2005), unchanged in Oil Country Tubular Goods from Japan: Final Results and Partial Rescission of Antidumping Duty Administrative Review, 71 FR 95 (Jan. 3, 2006). As a result, in such circumstances, we normally instructed CBP to liquidate any entries from the no-shipment company at the deposit rate in effect on the date of entry.

In our May 6, 2003, “automatic assessment” clarification, we explained that, where respondents in an administrative review demonstrate that they had no knowledge of sales through resellers to the United States, we would instruct CBP to liquidate such entries at the all-others rate applicable to the proceeding. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003).

Based on China Steel Corporation's timely assertion of no shipments and confirmation of that claim by examination of CBP data as well as through a no-shipment inquiry sent to CBP, we continue to determine that China Steel Corporation had no shipments to the United States during the POR. See Preliminary Results, 75 FR at 49470.

As we stated in the Preliminary Results, because “as entered” liquidation instructions do not alleviate the concerns which the May 2003 clarification was intended to address, we find it appropriate in this case to instruct CBP to liquidate any existing entries of merchandise produced by China Steel Corporation and exported by other parties at the all-others rate. In addition, we continue to find that it is more consistent with the May 2003 clarification not to rescind the review in part in these circumstances but, rather, to complete the review with respect to China Steel Corporation and issue appropriate instructions to CBP based on the final results of the review. See the “Assessment Rates” section of this notice below.

Cost of Production

As discussed in the Preliminary Results, we conducted an investigation to determine whether Chia Far made home market sales of the foreign like product during the POR at prices below its cost of production (COP) within the meaning of section 773(b) of the Act. See Preliminary Results, 75 FR at 49472-73. As detailed in the Preliminary Results, we based our analysis on Chia Far's weighted-average quarterly COP. Id. For these final results, we have continued to apply a quarterly cost methodology and have made no changes to the cost test performed in the Preliminary Results.

We found that more than 20 percent of Chia Far's sales of a given product during the reporting period were at prices less than the weighted-average COP for this period. Thus, we continue to determine that these below-cost sales were made in “substantial quantities” within an extended period of time and at prices which did not permit the recovery of all costs within a reasonable period of time in the normal course of trade. See sections 773(b)(2)(B)-(D) of the Act.

Therefore, for purposes of these final results, we continue to find that Chia Far made below-cost sales not in the ordinary course of trade. Consequently, we disregarded the below-cost sales and used the remaining sales as the basis for determining normal value pursuant to section 773(b)(1) of the Act.

Analysis of Comments Received

The issue raised by YUSCO in its case brief, and to which we have responded, is listed in the Appendix to this notice and addressed in the Issues and Decision Memorandum (Decision Memo), which is adopted by this notice. Parties can find a complete discussion of the issue raised in this review and the corresponding recommendation in this public memorandum, which is on file in the Central Records Unit, room 7046, of the main Department building.

In addition, a complete version of the Decision Memo can be accessed directly on the Web at http://ia.ita.doc.gov/​frn/​. The paper copy and electronic version of the Decision Memo are identical in content.

Changes Since the Preliminary Results

Based on our analysis of the comments received, we have made no changes in the margin calculations for Chia Far.

Final Results of Review

We determine that the following weighted-average margin percentages exist for the period July 1, 2008, through June 30, 2009:

Manufacturer/exporter	Percent margin
Chia Far Industrial Factory Co., Ltd	0.00
Review-Specific Average Rate Applicable to the Following Companies: 6
Chain Chon Industrial Co., Ltd	4.30
Chien Shing Stainless Co	4.30
China Steel Corporation	*
Dah Shi Metal Industrial Co., Ltd	4.30
Goang Jau Shing Enterprise Co., Ltd	4.30
KNS Enterprise Co., Ltd	4.30
Lih Chan Steel Co., Ltd	4.30
Maytun International Corp	4.30
PFP Taiwan Co., Ltd	4.30
Shih Yuan Stainless Steel Enterprise Co., Ltd	4.30
Ta Chen Stainless Pipe Co., Ltd	4.30
Tang Eng Iron Works	4.30
Tibest International Inc	4.30
Tung Mung Development Co., Ltd./Ta Chen Stainless Pipe Co., Ltd **	4.30
Waterson Corp	4.30
Yieh Loong Enterprise Co., Ltd (aka Chung Hung Steel Co., Ltd.)	4.30
Yieh Mau Corp	4.30
Yieh Trading Corp	4.30
Yieh United Steel Corporation	4.30
* No shipments or sales subject to this review.
** This rate applies to shipments of SSSSC produced by Tung Mung Development Co., Ltd. in Taiwan and exported from Taiwan to the United States by Ta Chen Stainless Pipe Co., Ltd.

Assessment

The Department shall determine, and CBP shall assess, antidumping duties on all appropriate entries. The Department intends to issue assessment instructions to CBP 15 days after the date of publication of these final results of review.

Pursuant to 19 CFR 351.212(b)(1), we calculated importer-specific ad valorem duty assessment rates for Chia Far based on the ratio of the total amount of antidumping duties calculated for the examined sales to the total entered value of those sales. Pursuant to 19 CFR 351.106(c)(2), we will instruct CBP to liquidate without regard to antidumping duties any entries for which the assessment rate is de minimis (i.e., less than 0.50 percent).

Consistent with the Department's practice, for the companies which were not selected for individual review, we will use the cash deposit rate as the assessment rate for these companies. See, e.g., Certain Frozen Warmwater Shrimp From India: Final Results and Partial Rescission of Antidumping Duty Administrative Review, 74 FR 33409 (July 13, 2009), and accompanying Issues and Decision Memorandum at Comment 3.

The Department clarified its “automatic assessment” regulation on May 6, 2003. See Antidumping and Countervailing Duty Proceedings: Assessment of Antidumping Duties, 68 FR 23954 (May 6, 2003). This clarification will apply to entries of subject merchandise during the POR produced by Chia Far for which Chia Far did not know its merchandise was destined for the United States. This clarification will also apply to POR entries of subject merchandise produced by China Steel Corporation for which we are making a final determination of no shipments, because it certified that it made no POR shipments of subject merchandise for which it had knowledge of U.S. destination. In this instance, we will instruct CBP to liquidate unreviewed entries at the all-others rate established in the less-than-fair-value (LTFV) investigation if there is no rate for the intermediate company(ies) involved in the transaction.

Cash Deposit Requirements

Further, the following deposit requirements will be effective for all shipments of SSSSC from Taiwan entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided for by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for the reviewed companies will be the rates shown above; (2) for previously investigated companies not listed above, as well as for China Steel Corporation, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, or the LTFV investigation, but the manufacturer is, the cash deposit rate will be the rate established for the most recent period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be 12.61 percent, the “All Others” rate made effective by the LTFV investigation.

See Notice of Antidumping Duty Order; Stainless Steel Sheet and Strip in Coils From United Kingdom, Taiwan, and South Korea, 64 FR 40555, 40557 (July 27, 1999). These deposit requirements, when imposed, shall remain in effect until further notice.

Notification to Importers

This notice serves as a final reminder to importers of their responsibility, under 19 CFR 351.402(f)(2), to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in the Secretary's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

Notification to Interested Parties

This notice serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of return/destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and the terms of an APO is a sanctionable violation.

We are issuing and publishing these final results of review in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

Dated: December 3, 2010.

Paul Piquado,

Acting Deputy Assistant Secretary for Import Administration.

Appendix—Issue in the Decision Memorandum

1. Whether the Department Should Rescind the Review with Respect to YUSCO.

Footnotes

1.  Arnokrome III is a trademark of the Arnold Engineering Company.

2.  Gilphy 36 is a trademark of Imphy, S.A.

3.  Durphynox 17 is a trademark of Imphy, S.A.

4.  This list of uses is illustrated and provided for descriptive purposes only.

5.  GIN4 Mo, GIN5 and GIN6 are the proprietary grades of Hitachi Metals America, Ltd.

6.  This rate is based upon the calculated rate from the most recently completed segment of this proceeding. See Preliminary Results, 75 FR at 49474.