2019-00747. Welded Large Diameter Line Pipe From Japan: Final Results of the Expedited Third Sunset Review of the Antidumping Duty Order

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

As a result of this sunset review, the Department of Commerce (Commerce) finds that revocation of the antidumping duty order on welded large diameter line pipe (line pipe) from Japan would be likely to lead to continuation or recurrence of dumping at the levels indicated in the “Final Results of Sunset Review” section of this notice.

DATES:

Applicable February 1, 2019.

FOR FURTHER INFORMATION CONTACT:

John McGowan, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone].

SUPPLEMENTARY INFORMATION:

Background

On September 11, 2018, Commerce published the notice of initiation of the third sunset review of the antidumping duty order on line pipe from Japan, pursuant to section 751(c)(2) of the Tariff Act of 1930, as amended (the Act).^[1] On September 17, 2018, Commerce received a notice of intent to participate in this review from American Cast Iron Pipe Company, Berg Steel Pipe Corporation, Berg Spiral Pipe Corporation, Dura-Bond Industries, and Stupp Corporation, members of the American Line Pipe Producers Association (ALPPA), and JSW Steel (USA) Inc. (JSW Steel), (collectively, domestic interested parties) within the deadline specified in 19 CFR 351.218(d)(1)(i).^[2] The domestic interested parties claimed interested party status under section 771(9)(C) of the Act, as manufacturers of a domestic like product in the United States.

On October 1, 2018, we received a complete substantive response for this review from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). We received no substantive responses from any other interested parties, nor was a hearing requested. As a result, pursuant to section 751(c)(3)(B) of the Act and 19 CFR 351.218(e)(1)(ii)(C)(2), Commerce conducted an expedited (120-day) sunset review of the order.

Scope of the Order

The product covered by this order is certain welded carbon and alloy line pipe, of circular cross section and with an outside diameter greater than 16 inches, but less than 64 inches, in diameter, whether or not stenciled. This product is normally produced according to American Petroleum Institute (API) specifications, including Grades A25, A, B, and X grades ranging from X42 to X80, but can also be produced to other specifications. The product currently is classified under U.S. Harmonized Tariff Schedule (HTSUS) item numbers 7305.11.10.30, 7305.11.10.60, 7305.11.50.00, 7305.12.10.30, 7305.12.10.60, 7305.12.50.00, 7305.19.10.30. 7305.19.10.60, and 7305.19.50.00. Although the HTSUS item numbers are provided for convenience and customs purposes, the written description of the scope is dispositive. Specifically not included within the scope of this investigation is American Water Works Association (AWWA) specification water and sewage pipe and the following size/grade combinations; of line pipe:

• Having an outside diameter greater than or equal to 18 inches and less than or equal to 22 inches, with a wall thickness measuring 0.750 inch or greater, regardless of grade.
• Having an outside diameter greater than or equal to 24 inches and less than 30 inches, with wall thickness measuring greater than 0.875 inches in grades A, B, and X42, with wall thickness measuring greater than 0.750 inches in grades X52 through X56, and with wall thickness measuring greater than 0.688 inches in grades X60 or greater.
• Having an outside diameter greater than or equal to 30 inches and less than 36 inches, with wall thickness measuring greater than 1.250 inches in grades A, B, and X42, with wall thickness measuring greater than 1.000 inches in grades X52 through X56, and with wall thickness measuring greater than 0.875 inches in grades X60 or greater.
• Having an outside diameter greater than or equal to 36 inches and less than 42 inches, with wall thickness measuring greater than 1.375 inches in grades A, B, and X42, with wall thickness measuring greater than 1.250 inches in grades X52 through X56, and with wall thickness measuring greater than 1.125 inches in grades X60 or greater.
• Having an outside diameter greater than or equal to 42 inches and less than 64 inches, with a wall thickness measuring greater than 1.500 inches in grades A, B, and X42, with wall thickness measuring greater than 1.375 inches in grades X52 through X56, and with wall thickness measuring greater than 1.250 inches in grades X60 or greater.
• Having an outside diameter equal to 48 inches, with a wall thickness measuring 1.0 inch or greater, in grades X-80 or greater.
• In API grades X80 or above, having an outside diameter of 48 inches to and including 52 inches, and with a wall thickness of 0.90 inch or more.
• In API grades XI00 or above, having an outside diameter of 48 inches to and including 52 inches, and with a wall thickness of 0.54 inch or more.
• An API grade X-80 having an outside diameter of 21 inches and wall thickness of 0.625 inch or more.

Analysis of Comments Received

All issues raised in this review, including the likelihood of continuation or recurrence of dumping in the event of revocation and the magnitude of the margins of dumping likely to prevail if the order were revoked, are addressed in the accompanying Issues and Decision Memorandum dated concurrently with, and hereby adopted by, this notice. The Issues and Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at http://access.trade.gov,, and to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Issues and Decision Memorandum can be accessed directly on the internet at http://enforcement.trade.gov/​frn/​. The signed Issues and Decision Memorandum and the electronic version of the Issues and Decision Memorandum are identical in content.

Final Results of Sunset Review

Pursuant to sections 751(c)(1) and 752(c)(1) and (3) of the Act, we determine that revocation of the antidumping duty order on line pipe from Japan would be likely to lead to continuation or recurrence of dumping, and that the magnitude of the margins of dumping likely to prevail would be up to 30.80 percent.

Notification to Interested Parties

This notice serves as the only reminder to interested parties subject to an administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction. We are issuing and publishing these results and notice in accordance with sections 751(c), 752(c), and 777(i)(1) of the Act and 19 CFR 351.218.

Dated: December 21, 2018.

P. Lee Smith,

Deputy Assistant Secretary for Policy and Negotiations.

Appendix

List of Topics Discussed in the Issues and Decision Memorandum

I. Summary

II. Background

III. Scope of the Order

IV. History of the Order

V. Legal Framework

VI. Discussion of the Issues

1. Likelihood of Continuation or Recurrence of Dumping

2. Magnitude of the Margins of Dumping Likely To Prevail

VII. Final Results of Sunset Review

VIII. Recommendation

Footnotes

1.  See Initiation of Five-Year (Sunset) Reviews, 83 FR 45887 (September 11, 2018).

2.  We note that American Cast Iron Pipe Company, Berg Steel Pipe Corp., and Stupp Corporation were petitioners in the original antidumping duty investigation.