05-2790. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2005 to January 19, 2005, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

DATES:

Comments identified by the docket ID number OPPT-2005-0010 and the specific PMN number or TME number, must be received on or before March 16, 2005.

ADDRESSES:

Comments may be submitted electronically, by mail, or through hand delivery/courier. Follow the detailed instructions as provided in Unit I. of the SUPPLEMENTARY INFORMATION.

FOR FURTHER INFORMATION CONTACT:

Colby Lintner, Regulatory Coordinator, Environmental Assistance Division, Office of Pollution Prevention and Toxics (7408M), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001; telephone number: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Copies of this Document and Other Related Information?

1. Docket. EPA has established an official public docket for this action under docket identification (ID) number OPPT-2005-0010. The official public docket consists of the documents specifically referenced in this action, any public comments received, and other information related to this action. Although a part of the official docket, the public docket does not include Confidential Business Information (CBI) or other information whose disclosure is restricted by statute. The official public docket is the collection of materials that is available for public viewing at the EPA Docket Center, Rm. B102-Reading Room, EPA West, 1301 Constitution Ave., NW., Washington, DC. The EPA Docket Center is open from 8:30 a.m. to 4:30 p.m., Monday through Friday, excluding legal holidays. The EPA Docket Center Reading Room telephone number is [phone] and the telephone number for the OPPT Docket, which is located in EPA Docket Center, is [phone].

2. Electronic access. You may access this Federal Register document electronically through the EPA Internet under the “Federal Register” listings at http://www.epa.gov/​fedrgstr/​.

An electronic version of the public docket is available through EPA's electronic public docket and comment system, EPA Dockets. You may use EPA Dockets at http://www.epa.gov/​edocket/​ to submit or view public comments, access the index listing of the contents of the official public docket, and to access those documents in the public docket that are available electronically. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. Once in the system, select “search,” then key in the appropriate docket ID number.

Certain types of information will not be placed in the EPA Dockets. Information claimed as CBI and other information whose disclosure is restricted by statute, which is not included in the official public docket, will not be available for public viewing in EPA's electronic public docket. EPA's policy is that copyrighted material will not be placed in EPA's electronic public docket but will be available only in printed, paper form in the official public docket. To the extent feasible, publicly available docket materials will be made available in EPA's electronic public docket. When a document is selected from the index list in EPA Dockets, the system will identify whether the document is available for viewing in EPA's electronic public docket. Although not all docket materials may be available electronically, you may still access any of the publicly available docket materials through the docket facility identified in Unit I.B.1. EPA intends to work towards providing electronic access to all of the publicly available docket materials through EPA's electronic public docket.

For public commenters, it is important to note that EPA's policy is that public comments, whether submitted electronically or in paper, will be made available for public viewing in EPA's electronic public docket as EPA receives them and without change, unless the comment contains copyrighted material, CBI, or other information whose disclosure is restricted by statute. When EPA identifies a comment containing copyrighted material, EPA will provide a reference to that material in the version of the comment that is placed in EPA's electronic public docket. The entire printed comment, including the copyrighted material, will be available in the public docket.

Public comments submitted on computer disks that are mailed or delivered to the docket will be transferred to EPA's electronic public docket. Public comments that are mailed or delivered to the docket will be scanned and placed in EPA's electronic public docket. Where practical, physical objects will be photographed, and the photograph will be placed in EPA's electronic public docket along with a brief description written by the docket staff.

C. How and To Whom Do I Submit Comments?

You may submit comments electronically, by mail, or through hand delivery/courier. To ensure proper receipt by EPA, identify the appropriate docket ID number and specific PMN number or TME number in the subject line on the first page of your comment. Please ensure that your comments are submitted within the specified comment period. Comments received after the close of the comment period will be marked “late.” EPA is not required to consider these late comments. If you wish to submit CBI or information that is otherwise protected by statute, please follow the instructions in Unit I.D. Do not use EPA Dockets or e-mail to submit CBI or information protected by statute.

1. Electronically. If you submit an electronic comment as prescribed in this unit, EPA recommends that you include your name, mailing address, and an e-mail address or other contact information in the body of your comment. Also include this contact information on the outside of any disk or CD ROM you submit, and in any cover letter accompanying the disk or CD ROM. This ensures that you can be identified as the submitter of the comment and allows EPA to contact you in case EPA cannot read your comment due to technical difficulties or needs further information on the substance of your comment. EPA's policy is that EPA will not edit your comment, and any identifying or contact information provided in the body of a comment will be included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket. If EPA cannot read your comment due to technical difficulties and cannot contact you for clarification, EPA may not be able to consider your comment.

i. EPA Dockets. Your use of EPA's electronic public docket to submit comments to EPA electronically is EPA's preferred method for receiving comments. Go directly to EPA Dockets at http://www.epa.gov/​edocket/​, and follow the online instructions for submitting comments. Once in the system, select “search,” and then key in docket ID number OPPT-2005-0010. The system is an “anonymous access” system, which means EPA will not know your identity, e-mail address, or other contact information unless you provide it in the body of your comment.

ii. E-mail. Comments may be sent by e-mail to [e-mail], Attention: Docket ID Number OPPT-2005-0010 and PMN Number or TME Number. In contrast to EPA's electronic public docket, EPA's e-mail system is not an “anonymous access” system. If you send an e-mail comment directly to the docket without going through EPA's electronic public docket, EPA's e-mail system automatically captures your e-mail address. E-mail addresses that are automatically captured by EPA's e-mail system are included as part of the comment that is placed in the official public docket, and made available in EPA's electronic public docket.

iii. Disk or CD ROM. You may submit comments on a disk or CD ROM that you mail to the mailing address identified in Unit I.C.2. These electronic submissions will be accepted in WordPerfect or ASCII file format. Avoid the use of special characters and any form of encryption.

2. By mail. Send your comments to: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave., NW., Washington, DC 20460-0001.

3. By hand delivery or courier. Deliver your comments to: OPPT Document Control Office (DCO) in EPA East Bldg., Rm. 6428, 1201 Constitution Ave., NW., Washington, DC. Attention: Docket ID Number OPPT-20050010 and PMN Number or TME Number. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

D. How Should I Submit CBI to the Agency?

Do not submit information that you consider to be CBI electronically through EPA's electronic public docket or by e-mail. You may claim information that you submit to EPA as CBI by marking any part or all of that information as CBI (if you submit CBI on disk or CD ROM, mark the outside of the disk or CD ROM as CBI and then identify electronically within the disk or CD ROM the specific information that is CBI). Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket and EPA's electronic public docket. If you submit the copy that does not contain CBI on disk or CD ROM, mark the outside of the disk or CD ROM clearly that it does not contain CBI. Information not marked as CBI will be included in the public docket and EPA's electronic public docket without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the technical person listed under FOR FURTHER INFORMATION CONTACT.

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket ID number assigned to this action and the specific PMN number you are commenting on in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2005 to January 19, 2005, consists of the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In Table I of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 23 Premanufacture Notices Received From: 01/01/05 to 01/19/05

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-05-0223	01/04/05	04/03/05	CBI	(G) Polymer dispersant admixture	(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), potassium salt
P-05-0224	01/04/05	03/20/05	CBI	(G) Polymer dispersant admixture	(G) Polycarboxylate polymer with alkenyloxyalkylol modified poly(oxyalkylenediyl), calcium potassium salt
P-05-0225	01/05/05	04/04/05	CBI	(G) Plating agent	(G) Imidazole, reaction products with trimethoxy[3-(oxiranylmethoxy)propyl]silane
P-05-0226	01/06/05	04/05/05	CBI	(G) Colorant for cleaning products	(G) Polyalkoxylated aromatic colorant
P-05-0227	01/06/05	04/05/05	CBI	(G) Chemical intermediate	(G) Alkoxylated aromatic amine
P-05-0228	01/07/05	04/06/05	PMC Specialities Group, Inc. for Raschig Corporation	(G) Functional monomer in polymers.	(S) 1-propanaminium, n,n-dimethyl-n-[2-[(2-methyl-1-oxo-2-propenyl)oxy]ethyl]-3-sulfo-,inner salt
P-05-0229	01/07/05	04/06/05	KAO Specialties Americas LLC	(S) Emulsifier in metalworking fluids; thickener and foam booster in dishwashing agent and car shampoo	(S) Amides, rape-oil, n-(hydroxyethyl),ethoxylated
P-05-0230	01/11/05	04/10/05	CBI	(G) Dispersing property of the polymer along with it's hydrophobic content leads it to application in both industrial and consumer laundry and dishwashing, where the polymer can disperse soils and mineral hardness; application is also found for industrial pigment dispersion.	(G) Methacrylic acid, styrene copolymer sodium salt
P-05-0231	01/11/05	04/10/05	CBI	(G) Dispersing property of the polymer along with it's hydrophobic content leads it to application in both industrial and consumer laundry and dishwashing, where the polymer can disperse soils and mineral hardness; application is also found for industrial pigment dispersion.	(G) Methacrylic acid, styrene copolymer ammonium salt
P-05-0232	01/11/05	04/10/05	CBI	(G) Dispersing property of the polymer along with it's hydrophobic content leads it to application in both industrial and consumer laundry and dishwashing, where the polymer can disperse soils and mineral hardness; application is also found for industrial pigment dispersion.	(G) Methacrylic acid, methyl methacrylate copolymer sodium salt
P-05-0233	01/11/05	04/10/05	CBI	(G) Dispersing property of the polymer along with it's hydrophobic content leads it to application in both industrial and consumer laundry and dishwashing, where the polymer can disperse soils and mineral hardness; application is also found for industrial pigment dispersion.	(G) Methacrylic acid, methyl methacrylate copolymer potassium salt
P-05-0234	01/11/05	04/10/05	CBI	(G) Dispersing property of the polymer along with it's hydrophobic content leads it to application in both industrial and consumer laundry and dishwashing, where the polymer can disperse soils and mineral hardness; application is also found for industrial pigment dispersion.	(G) Methacrylic acid, methyl methacrylate, acrylic acid copolymer sodium salt
P-05-0235	01/11/05	04/10/05	CBI	(G) Dispersing property of the polymer along with it's hydrophobic content leads it to application in both industrial and consumer laundry and dishwashing, where the polymer can disperse soils and mineral hardness; application is also found for industrial pigment dispersion.	(G) Methacrylic acid, methyl methacrylate, acrylic acid copolymer potassium salt
P-05-0236	01/12/05	04/11/05	Eastman Chemical Company	(G) Non-dispersive industrial use in adhesives	(G) Aromatic-modified aliphatic hydrocarbon resin
P-05-0237	01/12/05	04/11/05	CBI	(G) Rubber elastomer for tires, wheels, rolls and other specialty urethane applications.	(G) Hdi/carbonate/caprolactone/ether prepolymer
P-05-0238	01/13/05	04/12/05	CBI	(G) Melt processible resin and solution processible resin.	(G) Polyurethane hydrogel
P-05-0239	01/13/05	04/12/05	CBI	(G) Fuel additive	(G) Butanedioic acid, monopolyisobutylene derivs., ethylene esters, compounds with alkanolamine (1:2)
P-05-0240	01/18/05	04/17/05	Halox - A Division of Hammond Group, Inc.	(S) Corrosion inhibitor additive for paint	(S) 1,3-propanediamine, n,n-dimethyl-, monobenzozoate
P-05-0241	01/18/05	04/17/05	CBI	(G) Processing aid	(G) Glucomannan
P-05-0242	01/19/05	04/18/05	Cytec Industries Inc.	(G) Blocked catalyst for molded plastic parts.	(S) Ethanol, 2-(diethylamino)-,acetate(salt)
P-05-0243	01/19/05	04/18/05	CBI	(G) Coating material	(G) Alkanoic acid, alkyl-, alkyl ester, polymer with cycloalkyl-pyrrole-dione and alkenylbenzene
P-05-0244	01/19/05	04/18/05	CBI	(G) Component of mixture for highly dispersive applications.	(G) Substituted cycloalkenone
P-05-0245	01/19/05	04/18/05	CBI	(G) Adhesives	(G) Alkyl acrylic-methacrylic-vinylic copolymer

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

II. 23 Notices of Commencement From: 01/01/05 to 01/19/05

Case No.	Received Date	Commencement Notice End Date	Chemical
P-04-0296	01/05/05	12/24/04	(S) Carbamic acid, [(trimethoxysilyl)methyl]-, methyl ester
P-04-0317	01/05/05	12/24/04	(S) Cyclohexanamine, n-[(triethoxysilyl)methyl]-
P-04-0404	01/11/05	12/21/04	(G) Tetrabromophthalate diol diester
P-04-0544	01/04/05	11/24/04	(G) Polymer
P-04-0625	01/13/05	12/12/04	(G) Dibutylhexadecylhydroxyethylammoniumbromide
P-04-0633	01/12/05	12/21/04	(G) Poly (oxyethylene) alkenyl ether
P-04-0658	01/05/05	12/24/04	(S) 2-propenoic acid, 2-methyl-, (triethoxysilyl)methyl ester
P-04-0664	01/04/05	12/02/04	(S) Oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), monoacetate monohexadecanoate
P-04-0664	01/04/05	12/02/04	(S) Oxirane, methyl-, polymer with oxirane, ether with 1,2,3-propanetriol (3:1), monoacetate
P-04-0667	01/04/05	12/03/04	(S) Hexanedioic acid, polymer with 1,4-butanediol, 1,3-diisocyanatomethylbenzene, 1,6-hexanediol, 3-hydroxy-2-(hydroxymethyl)-2-methylpropanoic acid, 5-isocyanato-1-(isocyanatomethyl)-1,3,3-trimethylcyclohexane, .alpha.,.alpha.'-[(1-meth ylethylidene)di-4,1-phenylene]bis[.omega.-hydroxypoly[oxy(methyl-1,2-ethanediyl)]] and piperazine, compound with n,n-diethylethanamine
P-04-0704	01/05/05	12/27/04	(G) Polymer of carboxylic acids, glycols, and epoxy resin.
P-04-0749	01/12/05	12/21/04	(G) Polycarboxylated derivertive
P-04-0750	01/12/05	12/21/04	(G) Polycarboxylated derivertive
P-04-0800	01/05/05	12/23/04	(G) Modified styrene polymer
P-04-0831	01/10/05	12/22/04	(G) Aliphatic soluble acrylic polymer on the basis of isobutyl methacrylate
P-04-0833	01/05/05	12/27/04	(G) Alkyd resin
P-04-0838	01/06/05	12/14/04	(G) Copolymer of acrylic acid and styrene
P-04-0873	01/10/05	12/22/04	(G) Acrylic polymer on the basis of isobutyl methacrylate
P-04-0874	01/10/05	12/22/04	(G) Acrylic polymer on the basis of methacrylates
P-04-0884	01/06/05	12/29/04	(G) Urethane acrylate
P-04-0915	01/06/05	01/04/05	(G) Styrene-methacrylate copolymer
P-04-0916	01/06/05	01/04/05	(G) Styrene-methacrylate copolymer
P-04-0917	01/06/05	01/04/05	(G) Styrene-methacrylate copolymer

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: February 8, 2005.

Vicki A. Simons,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.