2020-03105. Certain New Chemicals; Receipt and Status Information for December 2019

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

EPA is required under the Toxic Substances Control Act (TSCA), as amended by the Frank R. Lautenberg Chemical Safety for the 21st Century Act, to make information publicly available and to publish information in the Federal Register pertaining to submissions under TSCA Section 5, including notice of receipt of a Premanufacture notice (PMN), Significant New Use Notice (SNUN) or Microbial Commercial Activity Notice (MCAN), including an amended notice or test information; an exemption application (Biotech exemption); an application for a test marketing exemption (TME), both pending and/or concluded; a notice of commencement (NOC) of manufacture (including import) for new chemical substances; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review. This document covers the period from 12/01/2019 to 12/31/2019.

DATES:

Comments identified by the specific case number provided in this document must be received on or before March 19, 2020.

ADDRESSES:

Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2019-0075, and the specific case number for the chemical substance related to your comment, by one of the following methods:

• Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.
• Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001.
• Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/​dockets/​contacts.html.

Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/​dockets.

FOR FURTHER INFORMATION CONTACT:

For technical information contact: Jim Rahai, Information Management Division (7407M), Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW, Washington, DC 20460-0001; telephone number: [phone]; email address: [e-mail].

For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: [phone]; email address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. Executive Summary

A. What action is the Agency taking?

This document provides the receipt and status reports for the period from 12/01/2019 to 12/31/2019. The Agency is providing notice of receipt of PMNs, SNUNs and MCANs (including amended notices and test information); an exemption application under 40 CFR part 725 (Biotech exemption); TMEs, both pending and/or concluded; NOCs to manufacture a new chemical substance; and a periodic status report on new chemical substances that are currently under EPA review or have recently concluded review.

EPA is also providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/​reviewing-new-chemicals-under-toxic-substances-control-act-tsca/​status-pre-manufacture-notices. This information is updated on a weekly basis.

B. What is the Agency's authority for taking this action?

Under the TSCA, 15 U.S.C. 2601 et seq., a chemical substance may be either an “existing” chemical substance or a “new” chemical substance. Any chemical substance that is not on EPA's TSCA Inventory of Chemical Substances (TSCA Inventory) is classified as a “new chemical substance,” while a chemical substance that is listed on the TSCA Inventory is classified as an “existing chemical substance.” (See TSCA section 3(11).) For more information about the TSCA Inventory go to: https://www.epa.gov/​tsca-inventory.

Any person who intends to manufacture (including import) a new chemical substance for a non-exempt commercial purpose, or to manufacture or process a chemical substance in a non-exempt manner for a use that EPA has determined is a significant new use, is required by TSCA section 5 to provide EPA with a PMN, MCAN or SNUN, as appropriate, before initiating the activity. EPA will review the notice, make a risk determination on the chemical substance or significant new use, and take appropriate action as described in TSCA section 5(a)(3). TSCA section 5(h)(1) authorizes EPA to allow persons, upon application and under appropriate restrictions, to manufacture or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a)(2), for “test marketing” purposes, upon a showing that the manufacture, processing, distribution in commerce, use, and disposal of the chemical will not present an unreasonable risk of injury to health or the environment. This is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/​oppt/​newchems.

Under TSCA sections 5 and 8 and EPA regulations, EPA is required to publish in the Federal Register certain information, including notice of receipt of a PMN/SNUN/MCAN (including amended notices and test information); an exemption application under 40 CFR part 725 (biotech exemption); an application for a TME, both pending and concluded; NOCs to manufacture a new chemical substance; and a periodic status report on the new chemical substances that are currently under EPA review or have recently concluded review.

C. Does this action apply to me?

This action provides information that is directed to the public in general.

D. Does this action have any incremental economic impacts or paperwork burdens?

No.

E. What should I consider as I prepare my comments for EPA?

1. Submitting confidential business information (CBI). Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.

2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/​dockets/​comments.html.

II. Status Reports

In the past, EPA has published individual notices reflecting the status of TSCA section 5 filings received, pending or concluded. In 1995, the Agency modified its approach and streamlined the information published in the Federal Register after providing notice of such changes to the public and an opportunity to comment (See the Federal Register of May 12, 1995, (60 FR 25798) (FRL-4942-7). Since the passage of the Lautenberg amendments to TSCA in 2016, public interest in information on the status of section 5 cases under EPA review and, in particular, the final determination of such cases, has increased. In an effort to be responsive to the regulated community, the users of this information, and the general public, to comply with the requirements of TSCA, to conserve EPA resources and to streamline the process and make it more timely, EPA is providing information on its website about cases reviewed under the amended TSCA, including the section 5 PMN/SNUN/MCAN and exemption notices received, the date of receipt, the final EPA determination on the notice, and the effective date of EPA's determination for PMN/SNUN/MCAN notices on its website at: https://www.epa.gov/​reviewing-new-chemicals-under-toxic-substances-control-act-tsca/​status-pre-manufacture-notices. This information is updated on a weekly basis.

III. Receipt Reports

For the PMN/SNUN/MCANs that have passed an initial screening by EPA during this period, Table I provides the following information (to the extent that such information is not subject to a CBI claim) on the notices screened by EPA during this period: The EPA case number assigned to the notice that indicates whether the submission is an initial submission, or an amendment, a notation of which version was received, the date the notice was received by EPA, the submitting manufacturer (i.e., domestic producer or importer), the potential uses identified by the manufacturer in the notice, and the chemical substance identity.

As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that this information in the table is generic information because the specific information provided by the submitter was claimed as CBI. Submissions which are initial submissions will not have a letter following the case number. Submissions which are amendments to previous submissions will have a case number followed by the letter “A” (e.g., P-18-1234A). The version column designates submissions in sequence as “1”, “2”, “3”, etc. Note that in some cases, an initial submission is not numbered as version 1; this is because earlier version(s) were rejected as incomplete or invalid submissions. Note also that future versions of the following tables may adjust slightly as the Agency works to automate population of the data in the tables.

Table I—PMN/SNUN/MCANs Approved * From 12/01/2019 to 12/31/2019

Case No.	Version	Received date	Manufacturer	Use	Chemical substance
J-20-0002	1	11/25/2019	CBI	(G) Production of a chemical	Microorganism with chromosomally-borne genetic modifications for the production of a chemical.
P-16-0486A	5	11/22/2019	CBI	(G) Site-limited intermediate in the production of a refrigerant precursor	(G) Polychloropropane.
P-16-0539A	5	12/3/2019	CBI	(G) photolithography	(G) Organic sulfonate compound.
P-17-0239A	7	12/11/2019	CBI	(G) Adhesive for open non-descriptive use	(G) Substituted carboxylic acid, polymer with 2,4-diisocyanato-1-methylbenzene, hexanedioic acid, alpha-hydro-omega-hydroxypoly[oxy(methyl-1,2-ethanediyl)], 1,1′-methylenebis[4-isocyanatobenzene], 2,2′-oxybis[ethanol], 1,1′-oxybis[2-propanol] and 1,2-propanediol.
P-17-0245A	7	12/12/2019	CBI	(G) Adhesive for open, non-dispersive use	(G) Unsaturated polyfluoro ester.
P-17-0282A	11	12/11/2019	Elantas PDG, Inc	(S) This is a component of a mixture that is used as an impregnating varnish for stators and motors	(S) Isocyanic acid, polymethylenepolyphenylene ester, caprolactam- and phenol-blocked.
P-17-0405A	8	12/6/2019	CBI	(G) Oil and gas well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0406A	7	12/6/2019	CBI	(G) Oil and gas well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0407	6	12/6/2019	CBI	(G) Well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0408	5	12/6/2019	CBI	(G) Well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0409	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0410	5	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0411	5	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0412	5	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0414	5	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0415	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0416	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0417	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0418A	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0420A	7	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0421A	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0422A	6	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid.
P-17-0423	5	12/6/2019	CBI	(G) Monitor well performance	(G) halogenated benzoic acid ethyl ester.
P-17-0441	5	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0442	5	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0443A	6	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0444	4	12/11/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0445A	7	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0446A	6	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0447	6	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0448	5	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0449	5	12/9/2019	CBI	(G) Monitor well performance	(G) halogenated sodium benzoate.
P-17-0450	5	12/9/2019	CBI	(G) Monitor well performance	(G) Halogenated benzoic acid.
P-18-0133A	3	12/2/2019	CBI	(G) component in hydraulic fracturing fluids	(G) Polyol adduct of bisaldehyde.
P-18-0253A	3	11/22/2019	UBE America, Inc	(G) Extrusion and Injection Molding Polymer	(S) Dodecanoic acid, 12-amino-, homopolymer.
P-18-0254A	3	11/22/2019	UBE America, Inc	(G) Extrusion and Injection Molding Polymer	(G) Hexanedioic acid, polymer with 12-aminododecanoic acid and a polyetheramine.
P-18-0255A	3	11/22/2019	UBE America, Inc	(G) Recreational equipment	(S) Dodecanoic acid, 12-amino-, polymer with hexahydro-2H-azepin-2-one.
P-18-0267A	4	11/21/2019	CBI	(G) curing agent	(G) Branched alkanoic acid, epoxy ester, reaction products with monocyclic dialkylamine and polycyclic alcohol epoxy polymer.
P-18-0268A	4	11/21/2019	CBI	(G) curing agent	(G) Branched alkanoic acid, epoxy ester, reaction products with monocyclicdialkanamine and polycyclic dialkanol ether polymer.
P-18-0269A	4	11/21/2019	CBI	(G) curing agent	(G) Branched alkanoic acid, epoxy ester, reaction products with monocyclicalkanamine, polycyclic alcohol ether homopolymer, and polycyclic alcohol epoxy polymer.
P-18-0273A	2	12/11/2019	CBI	(G) Used in polymer manufacturing	(S) 1,4-Cyclohexanedicarboxylic acid, 1,4-bis(2-ethylhexyl) ester.
P-18-0287A	9	12/4/2019	CBI	(G) Company plans to produce “tires, wastes, pyrolyzed, condensate oil fraction” (hereafter referred to as syn oil) (CASRN: 1312024-02-4) from scrap tire materials	(G) Synthetic oil from tires.
P-18-0300A	3	12/4/2019	CBI	(S) Additive for automatic dishwashing detergent	(G) Heteromonocycle, alkenoic 1:1 salt, polymer with alpha-(2-methyl-1-oxo-2-propen-1-y)l-omegamethoxypoly(oxy-1,2-ethanediyl) and methyl-alkenoic acid.
P-18-0345A	2	12/10/2019	Chitec Technology Co., Ltd	(S) R-gen 990 is a liquid aminoketone-based photoinitator (PI) intended for use as an ultraviolet (UV) curing agent in highly pigmented inks, photo-resists, and masks	(S) 1-Butanone, 2-(dimethylamino)-1-[4-(2-ethyl-2-methyl-3-oxazolidinyl)phenyl]-2-(phenylmethyl)-.
P-18-0350A	2	12/4/2019	Evonik Corporation	(S) Additive in water-borne UV-curable coatings,(S) Filler & pigment treatment,(S) Glass fiber treatment	(G) Aqueous methacrylamido modified polysiloxane.
P-18-0359A	3	12/10/2019	CBI	(G) Molded or extruded items	(G) Methoxy Vinyl Ether- Vinylidene Fluoride polymer.
P-18-0367A	3	12/9/2019	CBI	(S) Acid-modified polyether used as a wetting and dispersing additive for pigments in industrial paints and coatings	(G) Acid-modified polyether.
P-19-0052A	5	12/11/2019	Evonik Corporation	(S) Hard Surface Cleaner,(S) Component of Laundry Detergent	(S) Poly(oxy-1,2-ethanediyl), alpha-nonyl-omega-hydroxy-, branched and linear.
P-19-0055A	3	12/9/2019	Rahn USA, Corp	(S) The PMN is solely used as a photo initiator within UV curable coating/ink formulations	(S) 1,3-propanediol, 2-ethyl-2-(hydroxymethyl)-, polymer with oxirane, 4-(dimethylamino)benzoate.
P-19-0083A	2	12/3/2019	KX Technologies, LLC	(G) Activated carbon for water purification	(G) Charcoal, coconut shell, reaction products with cyclic amine.
P-19-0135A	4	12/10/2019	CBI	(G) Lubricant Additive	(G)Alkyl polyoxyethylene ethers, carboxymethylated.
P-19-0146A	3	11/25/2019	CBI	(G) Reagent used to introduce deuterium to the substrate chemical	(G) Modified dimethyl sulfoxide.
P-19-0148A	2	12/13/2019	CBI	(G) Fertilizer ingredient	(G) Iron, complexes with ethylenediamine-4-hydroxycarbomonocycle hetero-acid-2-oxoacetic acid reaction products, potassium salts.
P-19-0149A	2	12/13/2019	CBI	(G) Fertilizer ingredient	(G) Iron, complexes with ethylenediamine-4-hydroxycarbomonocycle hetero-acid potassium salt (1:1)-potassium 2-oxoacetate (1:1) reaction products, potassium salts.
P-19-0150A	2	12/13/2019	CBI	(G) Fertilizer ingredient	(G) Iron, complexes with ethylenediamine-4-hydroxycarbomonocycle hetero-acid-2-oxoacetic acid reaction products, sodium salts.
P-19-0151A	2	12/13/2019	CBI	(G) Fertilizer ingredient	(G) Iron, complexes with ethylenediamine-4-hydroxycarbomonocycle hetero-acid sodium salt (1:1)-sodium 2-oxoacetate (1:1) reaction products, sodium salts.
P-19-0152A	3	11/21/2019	UBE America, Inc	(G) Pre-polymer for polyurethane roll covers	(G) alkaneic acid, dialkyl ester polymer with alkanediol, [[(isocyanatocarbomonocycle)alkyl)carbomonocycle)carbamate.
P-19-0159A	5	12/6/2019	CBI	(G) As Catalyst in Industrial sector	(G) Titanium (4+) hydroxy-alkylcarboxylate salt complex.
P-19-0159A	6	12/13/2019	CBI	(G) As Catalyst in Industrial sector	(G) Titanium (4+) hydroxy-alkylcarboxylate salt complex.
P-19-0174	3	12/11/2019	International Lubricants, Inc	(G) Phosphorus antiwear compound	(G) Octadecanoic acid, (alkylphosphinyl), polyol ester.
P-20-0009A	3	12/11/2019	Resinate Materials Group, Inc	(S) Intermediate for use in the manufacture of polymers	(G) Waste plastics, poly(ethylene terephthalate), depolymd. with polyol, polymers with alkanedioic acid and alkanoic acid.
P-20-0011A	4	12/2/2019	CBI	(G) Light stabilizer	(G) Tetraoxaspiro[5.5]alkyl-3,9-diylbis(alkyl-2,1-diyl) bis(2-cyano-3-(3,4-dimethoxyphenyl)acrylate).
P-20-0012A	5	12/12/2019	CBI	(G) Ink Additive	(G) Polyol, polymer with alkyl diisocyanate, alkyl substituted heterocycle blocked.
P-20-0018	2	11/26/2019	CBI	(G) Component in candles	(G) Fatty acid dimers, polymers with glycerol and triglycerides.
P-20-0019	2	11/26/2019	CBI	(G) Component in candles	(G) Fatty acid dimers, polymers with glycerol and triglycerides.
P-20-0020	2	11/26/2019	CBI	(G) Component in candles	(G) Fatty acid dimers, polymers with glycerol and triglycerides.
P-20-0021	2	11/26/2019	CBI	(G) Component in candles	(G) Fatty acid dimers, polymers with glycerol and fatty acids.
P-20-0022	2	12/9/2019	CBI	(G) Fuel additive for combustion improver	(G) Polyalkoxycarbopolycycle hydroxy.
P-20-0024	3	12/4/2019	CBI	(G) Dispersant polymer for coatings	(G) Phenol-formaldehyde polymer with amino-oxirane copolymer and nitrobenzoates.
P-20-0026	2	12/20/2019	GE Healthcare	(S) The new monomer is isolated and used for subsequent polymerization	(G) N-alkyl heteromonocyclic diphenolamide.
P-20-0029	2	12/18/2019	KURARAY America, Inc	(G) Oil soluble additive	(S) Octanal, 7(or 8)-formyl-.
P-20-0030	1	12/16/2019	CBI	(S) Plasticizer for Plastisols, and Plasticizer in caulks and sealants	(G) Hexanedioic acid, alkyl ester.
P-20-0032	1	12/18/2019	Engineered Bonded Structures and Composites	(S) Talathol PO3, the material for which this notice is filed, is intended to be used as a copolymer in the production of urethane foam or coating	(G) Polyethylene terephthalate polyol.
P-20-0035	1	12/19/2019	CBI	(G) Colorant	(G) Substituted aromatic, 3,3′-[[6-[(substituted alkyl amino)]-1,3,5-triazine-2,4-diyl]bis[imino[2-(substituted)-5-[substituted alkoxy]-4,1-phenylene]-2,1- diazenediyl]]bis[substituted, sodium salt].
P-20-0038	1	12/23/2019	Nissan Chemical Houston Corporation	(S) PMN substance will be used as resist compound for semiconductor manufacture	(S) 1,3,5-Triazine-2,4,6(1H,3H,5H)-trione, 1,3,5-tris[3-(2-oxiranyl)propyl]-.
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission prior to the start of the 90-day review period, and in no way reflects the final status of a complete submission review.

In Table II of this unit, EPA provides the following information (to the extent that such information is not claimed as CBI) on the NOCs that have passed an initial screening by EPA during this period: The EPA case number assigned to the NOC including whether the submission was an initial or amended submission, the date the NOC was received by EPA, the date of commencement provided by the submitter in the NOC, a notation of the type of amendment (e.g., amendment to generic name, specific name, technical contact information, etc.) and chemical substance identity.

Table II—NOCs Approved * From 12/01/2019 to 12/31/2019

Case No.	Received date	Commencement date	If amendment, type of amendment	Chemical substance
P-16-0132A	12/12/2019	10/24/2019	Withdrew CBI claim	(S) Oxirane, 2-methyl-, polymer with oxirane, mono-c16-18-alkyl ethers, phosphates.
P-16-0388	12/3/2019	11/25/2019	N	(S) Amines, n-(3-aminopropyl)-n-tallow alkyltrimethylenedi-, polymers with bisphenol A and epichlorohydrin.
P-16-0470	11/28/2019	11/19/2019	N	(S) 2,7-Nonadien-4-ol, 4,8-dimethyl-.
P-16-0572A	12/10/2019	9/19/2019	Generic chemical name	(G) Fatty acids, tall oil, reaction products with polyalkylene-polysubstituted-terephthalic acid polymer.
P-17-0362	12/11/2019	11/12/2019	N	(G) Aliphatic phosphoric amide ester.
P-18-0125	11/26/2019	11/18/2019	N	(S) Acetic acid, 2-oxo-, sodium salt (1:1).
P-18-0155	12/4/2019	11/20/2019	N	(G) Crosslinked polymer of alkyl acrylamides, acrylate esters, and alkyl acrylamide sulfonate salt.
P-18-0156	12/4/2019	11/20/2019	N	(G) Crosslinked polymer of alkyl acrylamides, acrylate esters, and alkyl acrylamide sulfonic acid.
P-18-0295	11/27/2019	11/5/2019	N	(S) 1,3-Butanediol, (3R)-.
P-18-0300	12/4/2019	11/20/2019	N	(G) Heteromonocycle, alkenoic 1:1 salt, polymer with .alpha.-(2-methyl-1-oxo-2-propen-1-yl)-.omega.-methoxypoly(oxy-1,2-ethanediyl) and methyl-alkenoic acid.
P-18-0321A	12/5/2019	10/23/2019	Withdrew CBI claim	(S) Poly(oxy-1,2-ethanediyl), alpha,alpha′-(1-methyl-1,2-ethanediyl)bis[omega-hydroxy-.
P-19-0065	12/9/2019	11/15/2019	N	(S) 2lamda5,4lamda5,6lamda5—1,3,5,2,4,6 triazatriphosphorine, 2,2,4,4,6,6 -hexaphenoxy-.
P-19-0108	12/3/2019	11/18/2019	N	(S) Benzoic acid, 2-chloro-4-methyl-, ethyl ester.
P-19-0120	12/11/2019	11/21/2019	N	(G) Alkenoic acid, polymer with alkanediyl bis substituted alkylene bis heteromonocycle, substituted carbomonocycle and (alkylalkenyl) carbomonocycle, alkali metal salt.
* The term `Approved' indicates that a submission has passed a quick initial screen ensuring all required information and documents have been provided with the submission.

In Table III of this unit, EPA provides the following information (to the extent such information is not subject to a CBI claim) on the test information that has been received during this time period: The EPA case number assigned to the test information; the date the test information was received by EPA, the type of test information submitted, and chemical substance identity.

Table III—Test Information Received From 12/01/2019 to 12/31/2019

Case No.	Received date	Type of test information	Chemical substance
L-18-0168	11/25/2019	Particle Size Distribution Study	(G) Aromatic carboxylic acid, 2-[2-(6-amino-1-hydroxy-3-sulfo-2-aromaticyl)diazenyl]-, reaction products with 4-[[7-[2-(4-amino-2-alkoxyaromaticyl)diazenyl]-8-hydroxy-6-sulfo-2-aromaticyl]amino]aromatic carboxylic acid, 4-[2-(4-aminoaromaticyl)diazenyl]aromaticsulfonic acid, metal sulfate, 2,2′-(1,2-alkenediyl)bis[5-nitroaromaticsulfonic acid] and sodium hydroxide.
P-06-0489	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl methacrylate copolymer.
P-06-0494	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl methacrylate copolymer.
P-06-0576	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-06-0586	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl methacrylate copolymer.
P-07-0447	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-08-0222	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-09-0037	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl methacrylate copolymer.
P-09-0511	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-10-0317	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-13-0646	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-13-0647	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-13-0648	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-13-0649	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-13-0678	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl methacrylate copolymer.
P-13-0679	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-15-0154	12/14/2019	Annual Impurity Report	(G) Fluoroalkyl acrylate copolymer.
P-16-0543	12/12/2019	Exposure Monitoring Report	(G) Halogenophosphoric acid metal salt.
P-17-0005	12/09/2019	28-day (Subacute) Inhalation Toxicity Study (OECD Test Guideline 412)	(S) 1-tetradecene homopolymer hydrogenated.
P-17-0343A	12/03/2019	Ready Biodegradability of a Test Substance Based on OECD Method 301A, Acute Toxicity Test Freshwater Invertebrate and Vertebrate, Acute Oral Toxicity Study in Rats, Dermal and Eye Irritation Study	(G) Modified benzimidazole.
P-17-0343A	12/03/2019	Ready Biodegradability of a Test Substance Based on OECD Method 301A, Acute Toxicity Test Freshwater Invertebrate and Vertebrate, Acute Oral Toxicity Study in Rats, Dermal and Eye Irritation Study	(G) Modified benzimidazole salt.
P-18-0293	12/05/2019	In vitro Skin Corrosion Test with Chemilian H4000 XP using a Human Skin Model, In vitro Skin Irritation Test with Chemilian L3000 XP using a Human Skin Model	(S) Propanedioic acid, 2-methylene-, 1,3-dihexyl ester.
P-18-0303	12/09/2019	Aquatic Toxicity Acute Base set (OECD Test Guideline 201, 202, 203)	(G) 2-propenoic acid, polymer with aliphatic cyclic epoxide.
P-18-0365	12/13/2019	Exposure Monitoring Report	(G) Starch, carboxymethyl ether, sodium salt, polymer with polycarboxylic acid.
P-18-0366	12/13/2019	Exposure Monitoring Report	(G) Starch, carboxymethyl ether, sodium salt, polymer with mixed polycarboxylic acids.
P-19-0038	12/16/2019	Water solubility Study (OECD Test Guideline 105), Partition Coefficient Study (OECD Test Guideline 107), Analytical Method Validation of Fatty acids, coco, iso-Bu esters, Validation of the analytical methods	(S) Fatty acids, coco, iso-bu esters.
P-19-0041	11/25/2019	Algal Growth Inhibition Test, Acute Toxicity to Fish Mitigated by Humic Acid	(G) Alkyl diester, polymer with (dialkylamino alkyl) amine and bis(halogenated alkyl) ether.
P-19-0147	12/12/2019	Vapor Pressure by Isoteniscope (ASTM D2879)	(G) Alkoxylated butyl alkyl ester.

If you are interested in information that is not included in these tables, you may contact EPA's technical information contact or general information contact as described under FOR FURTHER INFORMATION CONTACT to access additional non-CBI information that may be available.

(Authority: 15 U.S.C. 2601 et seq.)

Dated: January 31, 2020.

Megan Carroll,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.