00-4420. Certain New Chemicals; Receipt and Status Information

AGENCY:

Environmental Protection Agency (EPA).

ACTION:

Notice.

SUMMARY:

Section 5 of the Toxic Substances Control Act (TSCA) requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory) to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a premanufacture notice (PMN) or an application for a test marketing exemption (TME), and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2000 to January 14, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

ADDRESSES:

Comments may be submitted by mail, electronically, or in person. Please follow the detailed instructions for each method as provided in Unit I. of the “SUPPLEMENTARY INFORMATION.” To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51941 and the specific PMN number in the subject line on the first page of your response.

FOR FURTHER INFORMATION CONTACT:

Joe Carra, Deputy Director, Office of Pollution Prevention and Toxics (7401), Office of Pollution Prevention and Toxics, Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460; telephone numbers: [phone] and TDD: [phone]; e-mail address: [e-mail].

SUPPLEMENTARY INFORMATION:

I. General Information

A. Does this Action Apply to Me?

This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitter of the premanufacture notices addressed in the action. If you have any questions regarding the applicability of this action to a particular entity, consult the person listed under FOR FURTHER INFORMATION CONTACT.

B. How Can I Get Additional Information, Including Copies of this Document and Other Related Documents?

1. Electronically. You may obtain copies of this document and certain other available documents from the EPA Internet Home Page at http://www.epa.gov/​. On the Home Page select “Laws and Regulations” and then look up the entry for this document under the “Federal Register—Environmental Documents.” You can also go directly to the “Federal Register” listings at http://www.epa.gov/​fedrgstr/.

2. In person. The Agency has established an official record for this action under docket control number OPPTS-51941. The official record consists of the documents specifically referenced in this action, any public comments received during an applicable comment period, and other information related to this action, including any information claimed as confidential business information (CBI). This official record includes the documents that are physically located in the docket, as well as the documents that are referenced in those documents. The public version of the official record does not include any information claimed as CBI. The public version of the official record, which includes printed, paper versions of any electronic comments submitted during an applicable comment period, is available for inspection in the TSCA Nonconfidential Information Center, North East Mall Rm. B-607, Waterside Mall, 401 M St., SW., Washington, DC. The Center is open from noon to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number of the Center is [phone].

C. How and to Whom Do I Submit Comments?

You may submit comments through the mail, in person, or electronically. To ensure proper receipt by EPA, it is imperative that you identify docket control number OPPTS-51941 and the specific PMN number in the subject line on the first page of your response.

1. By mail. Submit your comments to: Document Control Office (7407), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, Ariel Rios Bldg., 1200 Pennsylvania Ave., NW., Washington, DC 20460.

2. In person or by courier. Deliver your comments to: OPPT Document Control Office (DCO) in East Tower Rm. G-099, Waterside Mall, 401 M St., SW., Washington, DC. The DCO is open from 8 a.m. to 4 p.m., Monday through Friday, excluding legal holidays. The telephone number for the DCO is [phone].

3. Electronically. You may submit your comments electronically by e-mail to: “[e-mail],” or mail your computer disk to the address identified in this unit. Do not submit any information electronically that you consider to be CBI. Electronic comments must be submitted as an ASCII file avoiding the use of special characters and any form of encryption. Comments and data will also be accepted on standard disks in WordPerfect 6.1/8.0 or ASCII file format. All comments in electronic form must be identified by docket control number OPPTS-51941 and the specific PMN number. Electronic comments may also be filed online at many Federal Depository Libraries.

D. How Should I Handle CBI that I Want to Submit to the Agency?

Do not submit any information electronically that you consider to be CBI. You may claim information that you submit to EPA in response to this document as CBI by marking any part or all of that information as CBI. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2. In addition to one complete version of the comment that includes any information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public version of the official record. Information not marked confidential will be included in the public version of the official record without prior notice. If you have any questions about CBI or the procedures for claiming CBI, please consult the person listed under “FOR FURTHER INFORMATION CONTACT.”

E. What Should I Consider as I Prepare My Comments for EPA?

You may find the following suggestions helpful for preparing your comments:

1. Explain your views as clearly as possible.

2. Describe any assumptions that you used.

3. Provide copies of any technical information and/or data you used that support your views.

4. If you estimate potential burden or costs, explain how you arrived at the estimate that you provide.

5. Provide specific examples to illustrate your concerns.

6. Offer alternative ways to improve the notice or collection activity.

7. Make sure to submit your comments by the deadline in this document.

8. To ensure proper receipt by EPA, be sure to identify the docket control number assigned to this action in the subject line on the first page of your response. You may also provide the name, date, and Federal Register citation.

II. Why is EPA Taking this Action?

Section 5 of TSCA requires any person who intends to manufacture (defined by statute to include import) a new chemical (i.e., a chemical not on the TSCA Inventory to notify EPA and comply with the statutory provisions pertaining to the manufacture of new chemicals. Under sections 5(d)(2) and 5(d)(3) of TSCA, EPA is required to publish a notice of receipt of a PMN or an application for a TME and to publish periodic status reports on the chemicals under review and the receipt of notices of commencement to manufacture those chemicals. This status report, which covers the period from January 1, 2000 to January 14, 2000, consists of the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.

III. Receipt and Status Report for PMNs

This status report identifies the PMNs and TMEs, both pending or expired, and the notices of commencement to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period. If you are interested in information that is not included in the following tables, you may contact EPA as described in Unit II. to access additional non-CBI information that may be available.

In table I, EPA provides the following information (to the extent that such information is not claimed as CBI) on the PMNs received by EPA during this period: the EPA case number assigned to the PMN; the date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer; the potential uses identified by the manufacturer in the PMN; and the chemical identity.

I. 75 Premanufacture Notices Received From: 1/1/00 to 1/14/00

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
P-00-0389	01/03/00	04/02/00	CBI	(G) Coating component	(G) Modified polyisocyanate
P-00-0392	01/05/00	04/04/00	Wacker Silicones Corp.	(S) Plasters; building adhesive; hydrophobic coatings	(S) Neodecanoic acid, ethenyl ester, polymer with ethene and ethenyl acetate*
P-00-0393	01/04/00	04/03/00	Finetex, Inc.	(S) Textile fiber lubricant with high thermal stability, dispersant for tilanium doxide, zinc oxide, pigments, etc. plasticizer for selected polymer systems requiring high thermal stability	(S) Isostearyl benzoate*
P-00-0394	01/06/00	04/05/00	Johnson Polymer	(G) Open, non-dispersive use.	(G) Acrylic emulsion polymer
P-00-0395	01/07/00	04/06/00	CBI	(S) A radiation curable coating for industrial use	(G) Urethane acrylate
P-00-0396	01/10/00	04/09/00	Eastman Chemical company	(S) Plastic additive	(G) Substituted phthalocyanine dye
P-00-0397	01/07/00	04/06/00	E.I. Du Pont De Nemours and Co.	(S) Use or process in enclosed systems; electronic industry cleaning solvent; other precision industry cleaning; paint stripping; metal cleaning and degreasing; ink formulations; adhesives; pigment dispersions; emulsifiable concentrate solvent; wetting agent and/or surfactant; coating agent for polymer emulsion coatings; hydrocarbon extraction; polymer synthesis; wire enamel resin; optics; aerospace; other defense industry; automotive manufacturing and similar	(S) 2-piperidinone,1,3-dimethyl-*
P-00-0398	01/07/00	04/06/00	E.I. Du Pont De Nemours and Co.	(S) Use or process in enclosed systems; electronic industry cleaning solvent; other precision industry cleaning; paint stripping; metal cleaning and degreasing; ink formulations; adhesives; pigment dispersions; emulsifiable concentrate solvent; wetting agent and/or surfactant; coating agent for polymer emulsion coatings; hydrocarbon extraction; polymer synthesis; wire enamel resin; optics; aerospace; other defense industry; automotive manufacturing and similar	(S) 2-piperidinone,1,5-dimethyl-*
P-00-0399	01/10/00	04/09/00	Englehard Corporation	(S) A colorant for plastics	(G) Disazo yellow
P-00-0400	01/10/00	04/09/00	CBI	(G) Dye used in Thermal ink Jet Printer	(S) 2,7-naphthalenedisulfonic acid, 6-amino-4-hydroxy-3-[[7-sulfo-4-[(4-sulfophenyl) azo]-1-naphthalenyl]azo]-, compd. with 2,2 1/4,2 1/4 1/4- nitrilotris [ethanol] (1:4) *
P-00-0401	01/10/00	04/09/00	Reichhold, Inc.	(S) Pigment dispersion carrier	(G) Polyester resin
P-00-0402	01/11/00	04/10/00	CBI	(S) Resin for printing inks (offset printing)	(S) Fatty acids, C14-18 and C16-18-unsatd., polymers with isophthalic acid and trimethylolpropane*
P-00-0403	01/11/00	04/10/00	CBI	(S) Polyurethane raw material	(S) Poly[oxy (methyl-1,2-ethanediyl)], α-hydro-omega-hydroxy-, ether with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol*
P-00-0404	01/11/00	04/10/00	CBI	(S) Polyurethane raw material	(S) Fatty acids, C18-unsatd., dimers, di-me esters, hydrogenated, polymd.
P-00-0405	01/12/00	04/11/00	CBI	(G) Processing aid	(S) Benzenesufonic acid, bis (1-methylethyl)-, sodium salt*
P-00-0406	01/12/00	04/11/00	CBI	(S) Metalworking lubricant on the preparation of wire & cable	(G) Calcium fatty acid complex.
P-00-0407	01/12/00	04/11/00	CBI	(S) Metalworking lubricant on the preparation of wire & cable	(G) Calcium fatty acid complex.
P-00-0408	01/12/00	04/11/00	CBI	(S) Metalworking lubricant on the preparation of wire & cable	(G) Calcium fatty acid complex.
P-00-0409	01/12/00	04/11/00	CBI	(S) Metalworking lubricant on the preparation of wire & cable	(G) Calcium fatty acid complex.
P-00-0410	01/12/00	04/11/00	CBI	(S) Metalworking lubricant on the preparation of wire & cable	(G) Calcium fatty acid complex.
P-00-0411	01/12/00	04/11/00	CBI	(S) Metalworking lubricant on the preparation of wire & cable	(G) Calcium fatty acid complex.
P-00-0412	01/12/00	04/11/00	CBI	(S) Metalworking lubricant in the preparation of wire & cable	(G) Calcium fatty acid complex
P-00-0413	01/12/00	04/11/00	CBI	(S) Metalworking lubricant in the preparation of wire & cable	(G) Calcium fatty acid complex
P-00-0414	01/12/00	04/11/00	CBI	(S) Metalworking lubricant in the preparation of wire & cable	(G) Calcium fatty acid complex
P-00-0415	01/12/00	04/11/00	CBI	(S) Metalworking lubricant in the preparation of wire & cable	(G) Calcium fatty acid complex
P-00-0416	01/12/00	04/11/00	CBI	(S) Metalworking lubricant in the preparation of wire & cable	(G) Calcium fatty acid complex
P-00-0417	01/12/00	04/11/00	CBI	(S) Metalworking lubricant in the preparation of wire & cable	(G) Calcium fatty acid complex
P-00-0418	01/18/00	04/17/00	CIBA Specialty Chemicals Corp.	(S) Hardener for protective epoxy coatings for metal surfaces; hardener for epoxy coatings for flooring or walls	(G) Alkyl amides, from tetraethylenepentamine
P-00-0419	01/14/00	04/13/00	CBI	(G) Copying material for printers and copiers	(G) Polycarbonate polyester
P-00-0420	01/18/00	04/17/00	CBI	(G) Colorant	(G) Aromatic compound derivative
P-00-0421	01/18/00	04/17/00	CBI	(G) Pigment dispersant	(G) High molecular polymer with amino group
P-00-0422	01/18/00	04/17/00	CBI	(G) Coating component	(G) Non-volatile emulsion acrylic polymer
P-00-0423	01/18/00	04/17/00	King Industries, Inc.	(S) Corrosion inhibitor for industrial lubricants; corrosion inhibitor for rust preventive coatings	(G) Dinonylnaphthalenesulfonic acid compound with amine
P-00-0424	01/18/00	04/17/00	King Industries, Inc.	(S) Corrosion inhibitor for industrial lubricants; corrosion inhibitor for rust preventive coatings	(G) Dinonylnaphthalenesulfonic acid compound with amine
P-00-0425	01/19/00	04/18/00	Henkel Corp., Chemicals Group	(G) Dispersing agent	(S) Propanoic acid, 3-hydroxy-2-(hydroxymethyl)-2-methyl-, polymer with 2,2 1/4 -[1,4-butanediylbis(oxymethylene)] bis [oxirane], dihydro-3-(tetrapropenyl)- 2,5-furandione and α-hydro-omega-hydroxypoly (oxy-1,2-ethanediyl), compd. with 2-(dimethylamino) ehthanol*
P-00-0426	01/18/00	04/17/00	DMC-2, L.P.	(S) Flux paste used for brazing	(G) Inorganic acid reaction product, with alkaline flouride metal salts
P-00-0427	01/11/00	04/10/00	CBI	(G) Semiconductor coatings component	(G) Hydrolyzed alkoxysilane
P-00-0428	01/11/00	04/10/00	CBI	(G) Semiconductor coatings component	(G) Hydrolyzed alkoxysilane
P-00-0429	01/18/00	04/17/00	Dyneon LLC	(S) Fluoroelastomer for making molded parts	(G) Fluoroelastomer
P-00-0430	01/18/00	04/17/00	CBI	(G) Softener	(G) Quaternized ammonium salt
P-00-0431	01/19/00	04/18/00	Eastman Kodak Company	(G) Contained use in an article	(G) Substituted alicyclic alkenyl benz[e]indolium salt
P-00-0432	01/19/00	04/18/00	Henkel Adhesives - A Henkel Corporation Group	(S) Hot melt adhesive designed for molding/potting.; general hot melt adhesive	(S) Fatty acids, C18-unsatd., dimers, polymers with ethylenediamine, piperazine, polypropylene glycol diamine and sebacic acid*
P-00-0433	01/18/00	04/17/00	CBI	(G) Pigment dispersant	(G) Amine neutralized phosphated polyester
P-00-0434	01/24/00	04/23/00	CBI	(S) Grease thickner	(G) Alkyl substituted urea
P-00-0435	01/24/00	04/23/00	CBI	(S) Chemical intermediate	(G) Aminoalkyl polydimethylsiloxane
P-00-0436	01/21/00	04/20/00	CBI	(G) Adhesive for Flexible Substrates	(G) Polyester polyurethane
P-00-0437	01/21/00	04/20/00	CBI	(G) Adhesive for Flexible Substrates	(G) Polyester polyurethane
P-00-0438	01/21/00	04/20/00	CIBA Specialty Chemicals Corporation	(S) Hardener for epoxy dielectric insulation hardener for pipe bonding	(S) Oxiranemethanamine, n,n 1/4 -(methylenedi-4,1-phenylene) bis [n-(oxiranylmethyl)-, polymer with 4,4 1/4 -methylenebis [2-methylcyclohexanamine]*
P-00-0439	01/21/00	04/20/00	CBI	(G) Oilfield polymer	(G) Polymer of acrylamido alkyl propane sulfonic acid ammonium salt and two acrylic monomers
P-00-0440	01/21/00	04/20/00	CBI	(G) Open non-dispersive (polyester resin)	(G) Polyester resin
P-00-0441	01/24/00	04/23/00	CBI	(G) Oil field additive	(G) Alkyl glyceryl ether sulphonate
P-00-0442	01/24/00	04/23/00	CBI	(G) Fertilizer	(G) Zinc ammonium phosphate
P-00-0443	01/24/00	04/23/00	The Dow Chemical Company	(G) Fuel additive and chemical intermediate	(G) Alkaryl polyoxyalkylene derivative
P-00-0444	01/24/00	04/23/00	The Dow Chemical Company	(G) Fuel additive and chemical intermediate	(G) Alkaryl polyoxyalkylene derivative
P-00-0445	01/24/00	04/23/00	CBI	(G) Open, non-dispersive use;polyurethane adhesives & sealants	(G) Polyester polyol
P-00-0446	01/24/00	04/23/00	CBI	(G) Open, non-dispersive use;polyurethane adhesives & sealants	(G) Polyester polyol
P-00-0447	01/24/00	04/23/00	CBI	(G) Open, non-dispersive use;polyurethane adhesives & sealants	(G) Polyester polyol
P-00-0448	01/24/00	04/23/00	CBI	(G) Processing aid	(G) Titanium-aluminum complex on amorphous silica
P-00-0449	01/24/00	04/23/00	CBI	(G) Processing aid	(G) Titanium-aluminum complex on amorphous silica
P-00-0450	01/24/00	04/23/00	CBI	(G) Processing aid	(G) Titanium-aluminum complex on amorphous silica
P-00-0451	01/24/00	04/23/00	CBI	(G) Processing aid	(G) Titanium-aluminum complex on amorphous silica
P-00-0452	01/27/00	04/26/00	CBI	(S) Vat dye doe cellulosic fibers	(S) 3 h-indol-3-one, 5-bomo-2-(5-bromo-1,3-dihydro-3-oxo-2 h-indol-2-ylidene)-, 1,2-dihydro*
P-00-0453	01/27/00	04/26/00	Ashland Inc.	(G) Open, non-dispersive use in molding operations	(G) Unsaturated polyester
P-00-0454	01/28/00	04/27/00	3M	(S) Adhesive	(G) Acrylate copolymer
P-00-0455	01/28/00	04/27/00	CBI	(G) Contained use	(G) Substituted pyridimium bromides
P-00-0456	02/01/00	05/01/00	Dyneon llc	(S) Fluoroelastomer for molded parts	(G) Fluoroelastomer
P-00-0457	01/28/00	04/27/00	CBI	(G) Polymeric admixture for concrete	(G) Modified polyethercarboxylate
P-00-0458	01/28/00	04/27/00	CBI	(G) Polymeric admixture for concrete	(G) Modified polyethercarboxylate
P-00-0459	01/28/00	04/27/00	CBI	(G) Polymeric admixture for concrete	(G) Modified polyethercarboxylate
P-00-0460	01/28/00	04/27/00	CBI	(G) Polymeric admixture for concrete	(G) Modified polyethercarboxylate
P-00-0461	01/28/00	04/27/00	CBI	(G) Polymeric admixture for concrete	(G) Modified polyethercarboxylate
P-00-0462	01/28/00	04/27/00	CBI	(G) Polymeric admixture for concrete	(G) Modified polyethercarboxylate
P-00-0463	02/01/00	05/01/00	CBI	(G) Component of coating with open use	(G) Metal salt
P-00-0464	02/01/00	05/01/00	CBI	(G) Component of coating with open use	(G) Metal salt
P-00-0465	02/01/00	05/01/00	CBI	(S) Moisture curing adhesive for book assembly; moisture curing adhesive for wood laminating	(G) Isocyanate terminated urethane polymer

In table II, EPA provides the following information (to the extent that such information is not claimed as CBI) on the TMEs received:

II. 1 Test Marketing Exemption Notice Received From: 1/1/00 to 1/14/00

Case No.	Received Date	Projected Notice End Date	Manufacturer/Importer	Use	Chemical
T-00-0001	01/07/00	02/21/00	CBI	(G) Consumer product ingredient	(G) Salt of substituted aliphatic benzenesulfonic acid

In table III, EPA provides the following information (to the extent that such information is not claimed as CBI) on the Notices of Commencement to manufacture received:

III. 43 Notices of Commencement From: 1/1/00 to 1/14/00

Case No.	Received Date	Commencement/Import Date	Chemical
P-00-0008	01/21/00	01/07/00	(S) 2-propenoic acid, polymer with 1,3-butadiene, n-(hydroxymethyl)-2-propenamide and 2-propenenitrile*
P-00-0055	01/18/00	01/13/00	(G) Polyisobutylene oxime
P-00-0056	01/18/00	01/13/00	(G) Polyisobutylene oxime
P-94-0961	01/19/00	12/22/99	(G) Methylene diphenylene diisocyante (mdi) prepolymer
P-95-1214	01/03/00	12/02/99	(G) Polyether/polyester/aromatic polyurethane
P-96-0628	01/18/00	12/22/99	(G) Neutralized polyacrylic resin
P-96-1132	01/18/00	12/21/99	(G) Vinyl modified nonionic surfactant
P-98-1045	01/10/00	01/04/00	(S) Oil, canola, polymerized, oxidized*
P-98-1060	01/24/00	12/20/99	(G) Mixed vegetable oil fatty acids
P-98-1154	01/19/00	12/28/99	(G) Reaction product of ethoxylated fatty amines and ammoniummolybate
P-99-0166	01/18/00	12/20/99	(G) Acrylate functional polyester
P-99-0422	01/07/00	12/10/99	(G) (polyalkoxy, polyester) modified acrylate, reaction product with poly (cyanoalkane-alkylene glycol)
P-99-0655	01/27/00	12/23/99	(G) 2-anthracenesulfonic acid, 4-[[4-(acetylamino) phenyl]amino]-1-amino-9,10-dihydro-9,10-dioxo-, compd. with alkanol amine-alkylene oxide polymer
P-99-0751	01/24/00	01/13/00	(G) Polyester tetrafunctional acrylate
P-99-0764	01/24/00	01/10/00	(G) Ester modified melamine acrylate oligomer
P-99-0818	01/10/00	11/29/99	(G) Alkylphenol
P-99-0830	01/18/00	12/27/99	(G) Synthetic indigo solution
P-99-0890	01/27/00	12/28/99	(G) Alkanolamine carboxylate salts
P-99-0891	01/27/00	12/28/99	(G) Alkanolamine carboxylate salts
P-99-0922	01/18/00	12/23/99	(G) Polyacrylic resin
P-99-0936	01/04/00	12/17/99	(S) Fatty acids, C8-10, reaction products with epoxidized soybean oil, ethoxylated*
P-99-1041	01/12/00	12/28/99	(G) Pyrazolotriazolyl substituted acetamide
P-99-1046	01/10/00	01/04/00	(S) Octadecanoic acid, 12-(benzoyloxy)-, 2-ethylhexyl ester (9ci) *
P-99-1051	01/03/00	12/16/99	(G) Blocked polyurethane dispersion
P-99-1070	01/10/00	12/16/99	(G) Acrylic polymer on the basis of methyl methacrylate and n-butyl methacrylate
P-99-1095	01/06/00	12/14/99	(G) Perfluoropolyether derivative
P-99-1101	01/19/00	01/10/00	(G) Organo silane ester
P-99-1109	01/24/00	01/12/00	(S) Alcohols, C12-18, ethers with polyethylene glycol mono-bu ether*
P-99-1152	01/10/00	12/23/99	(G) Substituted aminophenol
P-99-1153	01/10/00	12/19/99	(G) Substituted aminophenol
P-99-1154	01/19/00	01/08/00	(G) Substituted hexanoic acids esters
P-99-1156	01/19/00	01/10/00	(G) Substituted oxazolidinedione
P-99-1181	01/18/00	12/29/99	(S) Morpholine, sulfate (2:1) *
P-99-1237	01/27/00	01/05/00	(G) Arylsulfonic acid, 2-[[6-[[4-chloro-6-[[4-[[2-(substituted]phenyl]amino]-1,3,5-triazin-2-yl]amino]-1-hydroxy-3-sulfo-2-naphthalenyl]azo]-, sodium salt
P-99-1249	01/17/00	12/14/99	(G) Polyester acrylate
P-99-1251	01/10/00	12/31/99	(G) Tin-ii-carboxylate
P-99-1296	01/12/00	12/26/99	(G) Substituted phenyl butanoic acid
P-99-1299	01/14/00	01/11/00	(G) Amino epoxy silane
P-99-1300	01/12/00	12/28/99	(G) Substituted phenyl butanoyl chloride
P-99-1316	01/19/00	12/17/99	(G) Rosin modified phenolic resin
P-99-1365	01/13/00	01/10/00	(G) Aromatic polyurethane
P-99-1370	01/17/00	01/14/00	(G) Aromatic polyester polyurethane
P-99-1387	01/18/00	01/04/00	(G) Substituted aliphatic carboxylic acid

List of Subjects

• Environmental protection
• Chemicals
• Premanufacturer notices

Dated: February 16, 2000.

Deborah A. Williams,

Acting Director, Information Management Division, Office of Pollution Prevention and Toxics.