-
Start Preamble
AGENCY:
Federal Aviation Administration (FAA), DOT.
ACTION:
Final rule.
SUMMARY:
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, EC 155B, and EC155B1 helicopters. This AD was prompted by the FAA's determination that to improve the process and performance in collecting metal particles in the main gear box (MGB) certain existing magnetic plugs (electrical and nonelectrical) installed in the MGB pump intake must be replaced with improved non-electrical magnetic plugs. This AD requires replacing the existing magnetic plug with an improved non-electrical magnetic plug, as specified in a European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
DATES:
This AD is effective April 1, 2021.
The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of April 1, 2021.
ADDRESSES:
For material incorporated by reference (IBR) in this AD, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this material on the EASA website at https://ad.easa.europa.eu. You may view this material at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call 817-222-5110. It is also available in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1036.
Examining the AD Docket
You may examine the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1036; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
Mahmood Shah, Aviation Safety Engineer, Fort Worth ACO Branch, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone 817-222-5538; email mahmood.g.shah@faa.gov.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
Discussion
The EASA, which is the Technical Agent for the Member States of the European Union, has issued EASA AD 2018-0176, dated August 21, 2018 (EASA AD 2018-0176) (also referred to as the Mandatory Continuing Airworthiness Information, or the MCAI), to correct an unsafe condition for certain Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, EC 155B, and EC155B1 helicopters.
The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to certain Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, EC 155B, and EC155B1 helicopters. The NPRM published in the Federal Register on November 30, 2020 (85 FR 76495). The NPRM was prompted by the FAA's determination that to improve the process and performance in collecting metal particles in the MGB certain existing magnetic plugs (electrical and non-electrical) installed in the MGB pump intake must be replaced with improved non-electrical magnetic plugs. The NPRM proposed to require replacing the existing magnetic plug with an improved non-electrical magnetic plug, as specified in an EASA AD.
The FAA is issuing this AD to address metal particles causing seizure of the MGB, loss of power to the main rotor, and subsequent loss of control of the helicopter. See the MCAI for additional background information.
Comments
The FAA gave the public the opportunity to participate in developing this final rule. The FAA received no comments on the NPRM or on the determination of the cost to the public.
Conclusion
The FAA reviewed the relevant data and determined that air safety and the public interest require adopting this final rule as proposed, except for minor editorial changes. The FAA has determined that these minor changes:
- Are consistent with the intent that was proposed in the NPRM for addressing the unsafe condition; and
- Do not add any additional burden upon the public than was already proposed in the NPRM.
Related Service Information Under 1 CFR Part 51
EASA AD 2018-0176 describes procedures for replacing the existing magnetic plug (electrical and non-electrical) installed in the MGB pump intake with an improved non-electrical magnetic plug. This material is reasonably available because the interested parties have access to it through their normal course of business Start Printed Page 11418or by the means identified in the ADDRESSES section.
Interim Action
The FAA considers this AD interim action. If final action is later identified, the FAA might consider further rulemaking then.
Costs of Compliance
The FAA estimates that this AD affects 52 helicopters of U.S. registry. The FAA estimates the following costs to comply with this AD:
Estimated Costs for Required Actions
Labor cost Parts cost Cost per product Cost on U.S. operators Up to 7.5 work-hours × $85 per hour = $637.50 $55 Up to $692.50 Up to $36,010 Authority for This Rulemaking
Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.
The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.
Regulatory Findings
This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.
For the reasons discussed above, I certify that this AD:
(1) Is not a “significant regulatory action” under Executive Order 12866,
(2) Will not affect intrastate aviation in Alaska, and
(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.
Start List of SubjectsList of Subjects in 14 CFR Part 39
- Air transportation
- Aircraft
- Aviation safety
- Incorporation by reference
- Safety
Adoption of the Amendment
Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:
Start PartPART 39—AIRWORTHINESS DIRECTIVES
End Part Start Amendment Part1. The authority citation for part 39 continues to read as follows:
End Amendment Part[Amended]2. The FAA amends § 39.13 by adding the following new airworthiness directive:
End Amendment Part2021-03-06 Airbus Helicopters: Amendment 39-21409; Docket No. FAA-2020-1036; Project Identifier MCAI-2020-01430-R.
(a) Effective Date
This airworthiness directive (AD) is effective April 1, 2021.
(b) Affected ADs
None.
(c) Applicability
This AD applies to Airbus Helicopters Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, EC 155B, and EC155B1 helicopters, certificated in any category, equipped with magnetic plugs, part number (P/N) 1B7807 or P/N 704A34543017 (electrical), or P/N 365A32-1711-00 (non-electrical), as applicable, installed in the main gearbox (MGB) pump intake.
(d) Subject
Joint Aircraft System Component (JASC) Code 6320, Main Rotor Gearbox.
(e) Reason
This AD was prompted by the FAA's determination that to improve the process and performance in collecting metal particles in MGB certain existing magnetic plugs (electrical and non-electrical) installed in the MGB pump intake must be replaced with improved non-electrical magnetic plugs. The FAA is issuing this AD to address metal particles causing seizure of the MGB, loss of power to the main rotor, and subsequent loss of control of the helicopter.
(f) Compliance
Comply with this AD within the compliance times specified, unless already done.
(g) Requirements
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Aviation Safety Agency (now European Union Aviation Safety Agency) (EASA) AD 2018-0176, dated August 21, 2018 (EASA AD 2018-0176).
(h) Exceptions to EASA AD 2018-0176
(1) Where EASA AD 2018-0176 refers to its effective date, this AD requires using the effective date of this AD.
(2) The “Remarks” section of EASA AD 2018-0176 does not apply to this AD.
(3) Although the service information referenced in EASA AD 2018-0176 specifies to discard certain parts, this AD does not include that requirement.
(4) Where EASA AD 2018-0176 refers to flight hours (FH), this AD requires using hours time-in-service.
(i) Special Flight Permit
Special flight permits may be issued in accordance with 14 CFR 21.197 and 21.199 to operate the helicopter to a location where the helicopter can be modified (if the operator elects to do so), provided the helicopter is operated using day visual flight rules and no passengers are onboard.
(j) Alternative Methods of Compliance (AMOCs)
(1) The Manager, Strategic Policy Rotorcraft Section, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the Strategic Policy Rotorcraft Section, send it to: Manager, Strategic Policy Rotorcraft Section, FAA, 10101 Hillwood Pkwy., Fort Worth, TX 76177; telephone 817-222-5110. Information may be emailed to: 9-ASW-FTW-AMOC-Requests@faa.gov.
(2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/certificate holding district office.
(k) Related Information
For more information about this AD, contact Mahmood Shah, Aviation Safety Engineer, Fort Worth ACO Branch, FAA, 10101 Hillwood Pkwy., Fort Worth, TX Start Printed Page 1141976177; telephone 817 222 5538; email mahmood.g.shah@faa.gov.
(l) Material Incorporated by Reference
(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.
(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.
(i) European Aviation Safety Agency (EASA) AD 2018-0176 dated August 21, 2018.
(ii) [Reserved]
(3) For EASA AD 2018-0176, contact the EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone +49 221 8999 000; email ADs@easa.europa.eu; internet www.easa.europa.eu. You may find this EASA AD on the EASA website at https://ad.easa.europa.eu.
(4) You may view this service information at the FAA, Office of the Regional Counsel, Southwest Region, 10101 Hillwood Pkwy., Room 6N-321, Fort Worth, TX 76177. For information on the availability of this material at the FAA, call 817-222-5110. This material may be found in the AD docket on the internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2020-1036.
(5) You may view this material that is incorporated by reference at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, email fedreg.legal@nara.gov, or go to https://www.archives.gov/federal-register/cfr/ibr-locations.html.
Start SignatureIssued on January 27, 2021.
Lance T. Gant,
Director, Compliance & Airworthiness Division, Aircraft Certification Service.
[FR Doc. 2021-03664 Filed 2-24-21; 8:45 am]
BILLING CODE 4910-13-P
Document Information
- Effective Date:
- 4/1/2021
- Published:
- 02/25/2021
- Department:
- Federal Aviation Administration
- Entry Type:
- Rule
- Action:
- Final rule.
- Document Number:
- 2021-03664
- Dates:
- This AD is effective April 1, 2021.
- Pages:
- 11417-11419 (3 pages)
- Docket Numbers:
- Docket No. FAA-2020-1036, Project Identifier MCAI-2020-01430-R, Amendment 39-21409, AD 2021-03-06
- RINs:
- 2120-AA64: Airworthiness Directives
- RIN Links:
- https://www.federalregister.gov/regulations/2120-AA64/airworthiness-directives
- Topics:
- Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety
- PDF File:
- 2021-03664.pdf
- Supporting Documents:
- » Airworthiness Directives: Airbus Helicopters
- » Supporting AD Document
- » Airworthiness Directives: Airbus Helicopters
- CFR: (1)
- 14 CFR 39.13