[Federal Register Volume 61, Number 24 (Monday, February 5, 1996)]
[Notices]
[Pages 4261-4262]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 96-2307]
-----------------------------------------------------------------------
DEPARTMENT OF ENERGY
Notice of Amendment of License
January 30, 1996.
Take notice that the following hydroelectric application has been
filed with the Commission and is available for public inspection:
a. Type of Application: Amendment of License.
b. Project No.: 2114-044, 045.
c. Date Filed: January 11, 1996.
d. Applicant: Public Utility District No. 2 of Grant, County,
Washington.
e. Name of Project: Priest Rapids Project.
f. Location: On the Columbia River in Grant County, Washington.
g. Filed Pursuant to: Federal Power Act, 16 U.S.C. Sec. 791(a)-
825(r).
[[Page 4262]]
h. Applicant Contact: Mr. Don Godard, Public Utility District No. 2
of Grant County, P.O. Box 878, Ephrata, WA 98823, (509) 754-3451.
i. FERC Contact: Timonthy Welch, (202) 219-2666.
j. Comment Date: February 26, 1996.
k. Description of Amendment: Grant County Public Utility District
No. 2 (Licensee) requests authorization to modify and test an
attraction flow prototype designed to facilitate downstream fish
passage at the Wanapum Development. Currently, the prototype consists
of a rectangular steel channel placed in the forebay and attached to
the dam in front of Units 7, 8, 9 and a portion of Unit 10. The
licensee wishes to extend the channel another 300 feet in front of
Units 4, 5, and 6. The licensee also proposes to construct an overflow
gate at spillway 12 for the development of a method of passing fish
through the spillway that more effectively uses water. The overflow
gate would be a bulkhead type steel structure approximately 57 feet
wide by 79 feet tall. Finally, the licensee wishes to construct a
deflector at spillway 2 for the development of such a device to reduce
the level of dissolved gasses in the spilled water. The deflector would
consist of a triangular structural steel section with concrete ballast,
32 feet below the spillway crest. The deflector's horizontal surface
would be approximately 12 feet and would run the full width of the
spillway slot, approximately 50 feet.
1. This notice also consists of the following standard paragraphs:
B, C1, and D2.
B. Comments, Protests, or Motions to Intervene--Anyone may submit
comments, a protest, or a motion to intervene in accordance with the
requirements of Rules of Practice and Procedure, 18 CFR 385.210, .211,
.214. In determining the appropriate action to take, the Commission
will consider all protests or other comments filed, but only those who
file a motion to intervene in accordance with the Commission's Rules
may become a party to the proceeding. Any comments, protests, or
motions to intervene must be received on or before the specified
comment date for the particular application.
C1. Filing and Service of Responsive Documents--Any filings must
bear in all capital letters the title ``COMMENTS'', ``RECOMMENDATIONS
FOR TERMS AND CONDITIONS'', ``PROTEST'', OR ``MOTION TO INTERVENE'', as
applicable, and the Project Number of the particular application to
which the filing refers. Any of the above-named documents must be filed
by providing the original and the number of copies provided by the
Commission's regulations to: The Secretary, Federal Energy Regulatory
Commission, 888 First Street, NE., Washington, DC 20426. A copy of any
motion to intervene must also be served upon each representative of the
Applicant specified in the particular application.
D2. Agency Comments--Federal, state, and local agencies are invited
to file comments on the described application. A copy of the
application may be obtained by agencies directly from the Applicant. If
an agency does not file comments within the time specified for filing
comments, it will be presumed to have no comments. One copy of an
agency's comments must also be sent to the Applicant's representatives.
Lois D. Cashell,
Secretary.
[FR Doc. 96-2307 Filed 2-2-96; 8:45 am]
BILLING CODE 6717-01-M
