[Federal Register Volume 59, Number 47 (Thursday, March 10, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-5463]
[[Page Unknown]]
[Federal Register: March 10, 1994]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
Export Trade Certificate of Review
ACTION: Notice of application to amend certificate.
-----------------------------------------------------------------------
SUMMARY: The Office of Export Trading Company Affairs (``OETCA''),
International Trade Administration, Department of Commerce, has
received an application to amend an Export Trade Certificate of Review.
This notice summarizes the proposed amendment and requests comments
relevant to whether the Certificate should be issued.
FOR FURTHER INFORMATION CONTACT: Friedrich R. Crupe, Acting Director,
Office of Export Trading Company Affairs, International Trade
Administration, (202) 482-5131. This is not a toll-free number.
SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act
of 1982 (15 U.S.C. 4001-21) authorizes the Secretary of Commerce to
issue Export Trade Certificates of Review. A Certificate of Review
protects the holder and the members identified in the Certificate from
state and federal government antitrust actions and from private, treble
damage antitrust actions for the export conduct specified in the
Certificate and carried out in compliance with its terms and
conditions. Section 302(b)(1) of the Act and 15 CFR 325.6(a) require
the Secretary to publish a notice in the Federal Register identifying
the applicant and summarizing its proposed export conduct.
Request for Public Comments
Interested parties may submit written comments relevant to the
determination whether an amended Certificate should be issued. An
original and five (5) copies should be submitted no later than 20 days
after the date of this notice to: Office of Export Trading Company
Affairs, International Trade Administration, Department of Commerce,
room 1800H, Washington, DC 20230. Information submitted by any person
is exempt from disclosure under the Freedom of Information Act (5
U.S.C. 552). Comments should refer to this application as ``Export
Trade Certificate of Review, application number 87-9A004.''
AMT--The Association For Manufacturing Technology's (``AMT'')
original Certificate was issued on May 19, 1987 (52 FR 19371, May 22,
1987) and previously amended on December 11, 1987 (52 FR 48454,
December 22, 1987), January 3, 1989 (54 FR 837, January 10, 1989);
April 20, 1989 (54 FR 19427, May 5, 1989); May 31, 1989 (54 FR 24931,
June 12, 1989); May 29, 1990 (55 FR 23576, June 11, 1990); June 7, 1991
(56 FR 28140, June 19, 1991); November 27, 1991 (56 FR 63932, December
6, 1991); and July 20, 1992 (57 FR 33319, July 28, 1992). A summary of
the application for an amendment follows.
Summary of the Application:
Applicant: AMT--The Association For Manufacturing Technology, 7901
Westpark Drive, McLean, Virginia 22102-4269.
Contact: Jerome D. Sorkin, Legal Counsel, Telephone: (202) 662-
6000.
Application No.: 87-9A004.
Date Deemed Submitted: March 1, 1994.
Proposed Amendment: AMT--The Association For Manufacturing
Technology seeks to amend its Certificate to:
1. Add each of the following companies as a new ``Member'' of the
Certificate within the meaning of section 325.2(1) of the Regulations
(15 CFR 325.2(1)): BHS-Torin, Inc., Farmington, Connecticut; Bertsche
Engineering Corporation, Buffalo Grove, Illinois; Bohle Machine Tools,
Inc., Farmington Hills, Michigan; Bramac Machine Tool Co., Tucson,
Arizona; Burr King Mfg. Co., Inc., South El Monte, California; Cellular
Concepts Company, Detroit, Michigan (controlling entity: U.S. Equipment
Co.); City Machine Tool & Die Company, Inc., Muncie, Indiana; D & H
Machinery, Inc. Toledo, Ohio; Darex Corporation, Ashland, Oregon;
DeVlieg-Bullard Services Group, Rockford, Illinois (controlling entity:
DeVlieg-Bullard Inc.); Feldmann, Inc., Rockford, Illinois; Industrial
Metal Products Corporation, Lansing, Michigan; Kalamazoo Saw Co.,
Kalamazoo, Michigan (controlling entity: KTS Industries, Inc.);
Komatsu-Cybermation, Medford, Massachusetts (controlling entity:
Komatsu Ltd.); Lasercut, Inc., North Bradford, Connecticut; M T R
Ravensburg, Inc., Rochester, New York; Milltronics Manufacturing
Company, Chanhassen, Minnesota; Modern Machine Tool Company, Jackson,
Michigan; Munson Machinery Company, Inc., Utica, New York; Parlec,
Inc., Fairport, New York; Rofin-Sinar, Inc., Plymouth, Michigan
(controlling entity: Siemens Corporation); Sugino Corporation,
Schaumburg, Illinois (controlling entity: Sugino Machine Ltd.); Utilase
Systems, Inc., Detroit, Michigan; Weldun Flexible Assembly Systems,
Bridgman, Michigan (controlling entity: Weldun International, Robert
Bosch Corp.); Wes-Tech, Inc., Buffalo Grove, Illinois; Herman Williams
Company, Inc., Birmingham, Alabama; and Peter Wolters of America,
Plainville, Massachusetts (Peter Wolters AG);
2. Delete each of the following companies as a ``Member'' of the
Certificate: Abrasive Engineering & Manufacturing; Alpha Machine, Inc.;
American Machine & Science (Katy Inds.); Coherent General, Inc.;
Equipment Systems Technology Company; GTE Valenite Corporation; The
Hill Acme Company; C. O. Hoffacker Company; HZ Clearing Inc.; Jacobson
Tool & Manufacturing Corp.; L & J Press Corporation; Maho Machine
Tool Corporation; Manuflex Corporation; Mega Manufacturing Inc.;
Pacific Press & Shear Inc.; Perfekt Precision Mfg. Co., Inc.;
Tannewitz, Inc.; Truxton Machinery, Inc.; Unipunch Products, Inc.; and
Vulcan Tool Company; and
3. Change the listing of the company name for each current
``Member'' cited in this paragraph to the new listing cited in this
paragraph in parenthesis as follows: American Pfauter Limited (American
Pfauter Limited Partnership); Automation & Modular Components, Inc.
(Automation & Modular Components); Barnes Drill Company (Barnes
International, Inc.); Belden Tools, Inc. (Belden Inc.); Blue Valley
Machine and Mfg. Co., Inc. (Blue Valley Machine and Mfg. Co.); Bracker
Corporation (Bracker Corporation Pittsburgh); Bryant Grinder
Corporation (Vermont-USA Machine Tool Group); Cleveland Punch & Shear
(Bath Iron Works); The Cleveland Tapping Machine Company (TCE
Corporation); Command Corporation (Command Corporation International);
Compumachine Inc. (Compumachine Incorporated); Cooper-Weymouth,
Peterson Div., Reed National Corp. (Cooper-Weymouth, Peterson);
Crankshaft Machine Company (Crankshaft Machine Group); Dake Division,
JSJ Corporation (Dake); Danly Machine Division/Connell Ltd. Partnership
(Danly-Komatsu, L.P.); Digital Electronic Automation, Inc. (DEA); Eaton
Leonard Technologies, Inc. (Eaton Leonard, Inc.); Electro Arc
Manufacturing Co., Inc. (Electro Arc Manufacturing Co.); Esterline
Corporation (Esterline Technologies); Fadal Engineering Company, Inc.
(Fadal Engineering Co., Inc.); Fairfield Machine Co., Inc. (Fairfield
Machine); Fayscott Company (Fayscott Co.); Fellows Corporation
(Vermont-USA Machine Tool Group); Genesis Systems Group Inc. (Genesis
Systems Group); George Fischer-Bohle Machine Tools Corp. (George
Fischer, Ltd.); Gleason Corporation (The Gleason Corporation); Gold
Crown Machinery, Inc. (Goldcrown Machinery); Greenfield Industries--
Geometric Division (Greenfield Industries); Hansvedt Industries, Inc.
(Hansvedt EDM Division); Harper Company (Harper Surface Finishing
Systems, Inc.); HEM, Inc. (HE&M Saw); P. R. Hoffman Machine Products
Co. (P. R. Hoffman Machine Products); Hoglund Corporation (Hoglund
Technology Corporation); Imperial Stamp & Engraving Co., Inc. (Imperial
Stamp & Engraving Company); Jarvis Corporation (Jarvis Products
Corporation); Jones & Lamson-Vermont Corp. (Vermont-USA Machine Tool
Group); Litton Industrial Automation--Machining & Assembly Sys. Div.
(Litton Industrial Automation); Lynn Electronics Corp. (Lynn
Electronics Corporation); J.M. Montgomery Mfg. Inc. (J.M. Montgomery
Manufacturing Inc.); Multipress Incorporated (Multipress Division);
National Acme Co. (The National Acme Company); National Broach &
Machine Company (National Broach & Machine Co.); The Ohio Broach
Machine Co. (The Ohio Broach & Machine Co.); Okuma Machinery, Inc.
(Okuma Inc.); Peerless (Peerless Saw Division--Wisconsin Automated
Machinery); PH Hydraulics & Automation, Inc. (PH Hydraulics and
Automation, Inc.); PMC Industries, Inc. (PMC Industries); PS Group,
Inc. (PS Group); Pope Machinery Inc. (Pope Corporation); Rank Pneumo
Inc. (Rank Taylor Hobson Inc.); Republic Lagun CNC Corporation
(Republic Lagun Machine Tool Co.); The S-P Manufacturing Corporation
(S-P/Sheffer International, Inc.); Seneca Falls Machine Tool Co., Inc.
(Seneca Falls Technology Group); Setco Industries, Inc. (Setco Sales
Company); South Bend Lathe, Inc. (South Bend Lathe Corp.); and Teledyne
Industries, Inc. (Teledyne).
Dated: March 3, 1994.
Friedrich R. Crupe,
Acting Director, Office of Export Trading Company Affairs.
[FR Doc. 94-5463 Filed 3-9-94; 8:45 am]
BILLING CODE 3510-DR-P
