-
Start Preamble
AGENCY:
Environmental Protection Agency (EPA).
ACTION:
Notice.
SUMMARY:
EPA is required under the Toxic Substances Control Act (TSCA) to publish in the Federal Register a notice of receipt of a premanufacture notice (PMN); an application for a test marketing exemption (TME), both pending and/or expired; and a periodic status report on any new chemicals under EPA review and the receipt of notices of commencement (NOC) to manufacture those chemicals. This document covers the period from December 1, 2016 to December 30, 2016.
DATES:
Comments identified by the specific case number provided in this document, must be received on or before April 10, 2017.
ADDRESSES:
Submit your comments, identified by docket identification (ID) number EPA-HQ-OPPT-2016-0697, and the specific PMN number or TME number for the chemical related to your comment, by one of the following methods:
- Federal eRulemaking Portal: http://www.regulations.gov. Follow the online instructions for submitting comments. Do not submit electronically any information you consider to be Confidential Business Information (CBI) or other information whose disclosure is restricted by statute.
- Mail: Document Control Office (7407M), Office of Pollution Prevention and Toxics (OPPT), Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001.
- Hand Delivery: To make special arrangements for hand delivery or delivery of boxed information, please follow the instructions at http://www.epa.gov/dockets/contacts.html.
Additional instructions on commenting or visiting the docket, along with more information about dockets generally, is available at http://www.epa.gov/dockets.
Start Further InfoFOR FURTHER INFORMATION CONTACT:
For technical information contact: Jim Rahai, IMD 7407M, Office of Pollution Prevention and Toxics, Environmental Protection Agency, 1200 Pennsylvania Ave. NW., Washington, DC 20460-0001; telephone number: (202) 564-8593; email address: rahai.jim@epa.gov.
For general information contact: The TSCA-Hotline, ABVI-Goodwill, 422 South Clinton Ave., Rochester, NY 14620; telephone number: (202) 554-1404; email address: TSCA-Hotline@epa.gov.
End Further Info End Preamble Start Supplemental InformationSUPPLEMENTARY INFORMATION:
I. General Information
A. Does this action apply to me?
This action is directed to the public in general. As such, the Agency has not attempted to describe the specific entities that this action may apply to. Although others may be affected, this action applies directly to the submitters of the actions addressed in this document.
B. What should I consider as I prepare my comments for EPA?
1. Submitting CBI. Do not submit this information to EPA through regulations.gov or email. Clearly mark the part or all of the information that you claim to be CBI. For CBI information in a disk or CD-ROM that you mail to EPA, mark the outside of the disk or CD-ROM as CBI and then identify electronically within the disk or CD-ROM the specific information that is claimed as CBI. In addition to one complete version of the comment that includes information claimed as CBI, a copy of the comment that does not contain the information claimed as CBI must be submitted for inclusion in the public docket. Information so marked will not be disclosed except in accordance with procedures set forth in 40 CFR part 2.
2. Tips for preparing your comments. When preparing and submitting your comments, see the commenting tips at http://www.epa.gov/dockets/comments.html.
II. What action is the Agency taking?
This document provides receipt and status reports, which cover the period from December 1, 2016 to December 30, 2016, and consists of the PMNs and TMEs both pending and/or expired, and the NOCs to manufacture a new chemical that the Agency has received under TSCA section 5 during this time period.
III. What is the Agency's authority for taking this action?
Under TSCA, 15 U.S.C. 2601 et seq., EPA classifies a chemical substance as either an “existing” chemical or a “new” chemical. Any chemical substance that is not on EPA's TSCA Inventory is classified as a “new chemical,” while those that are on the TSCA Inventory are classified as an “existing chemical.” For more information about the TSCA Inventory, please go to: http://www.epa.gov/opptintr/newchems/pubs/inventory.htm.
Anyone who plans to manufacture or import a new chemical substance for a non-exempt commercial purpose is required by TSCA section 5 to provide EPA with a PMN, before initiating the activity. Section 5(h)(1) of TSCA authorizes EPA to allow persons, upon application, to manufacture (includes import) or process a new chemical substance, or a chemical substance subject to a significant new use rule (SNUR) issued under TSCA section 5(a), for “test marketing” purposes, which is referred to as a test marketing exemption, or TME. For more information about the requirements applicable to a new chemical go to: http://www.epa.gov/oppt/newchems.
Under TSCA sections 5(d)(2) and 5(d)(3), EPA is required to publish in the Federal Register a notice of receipt of a PMN or an application for a TME and to publish in the Federal Register periodic reports on the status of new chemicals under review and the receipt of NOCs to manufacture those chemicals.
IV. Receipt and Status Reports
As used in each of the tables in this unit, (S) indicates that the information in the table is the specific information provided by the submitter, and (G) indicates that the information in the table is generic information because the specific information provided by the submitter was claimed as CBI.
For the 65 PMNs received by EPA during this period, Table 1 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the PMN; The date the PMN was received by EPA; the projected end date for EPA's review of the PMN; the submitting manufacturer/importer; the Start Printed Page 13340potential uses identified by the manufacturer/importer in the PMN; and the chemical identity.
Table 1—PMNs Received From December 2, 2016 to December 30, 2016
Case No. Received date Projected notice end date Manufacturer importer Use Chemical P-16-0193 12/5/2016 3/5/2017 CBI (S) Intermediate. (G) Branched alkenes. P-16-0358 12/19/2016 3/19/2017 CBI (S) Intermediate for further polymer reaction (G) Alkyl phenol. P-16-0372 12/21/2016 3/21/2017 CBI (G) Wetting and dispersing additive (G) Polyester phosphate alkyl alkyl esters. P-16-0380 12/1/2016 3/1/2017 CBI (G) Component of an electrocoat resin (G) Formic acid, compounds (compds.) with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts). P-16-0380 12/1/2016 3/1/2017 CBI (G) Component in electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts). P-16-0380 12/1/2016 3/1/2017 CBI (S) Anti-Crater additive for automotive electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts). P-16-0381 12/1/2016 3/1/2017 CBI (S) Anti-Crater additive for automotive electrocoat resin (G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products formates (salts). P-16-0381 12/1/2016 3/1/2017 CBI (G) Component of electrocoat resin (G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products formates (salts). P-16-0381 12/1/2016 3/1/2017 CBI (G) Component of an electrocoat resin (G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products formates (salts). P-16-0382 12/1/2016 3/1/2017 CBI (G) Component of an electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts). Start Printed Page 13341 P-16-0382 12/1/2016 3/1/2017 CBI (S) Anti-Crater additive for automotive electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts). P-16-0383 12/1/2016 3/1/2017 CBI (G) Component in electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts). P-16-0383 12/1/2016 3/1/2017 CBI (G) Component of an electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts). P-16-0383 12/1/2016 3/1/2017 CBI (S) Anti-Crater additive for automotive electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products acetates (salts). P-16-0384 12/1/2016 3/1/2017 CBI (G) Component of electrocoat resin (G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products formates (salts). P-16-0384 12/1/2016 3/1/2017 CBI (S) Anti-Crater additive for automotive electrocoat resin (G) Propanoic acid, 2-hydroxy-, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products formates (salts). P-16-0385 12/1/2016 3/1/2017 CBI (G) Component of electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts). P-16-0385 12/1/2016 3/1/2017 CBI (S) Anti-Crater additive for automotive electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts). Start Printed Page 13342 P-16-0385 12/1/2016 3/1/2017 CBI (G) Component in electrocoat resin (G) Formic acid, compds. with hydrolyzed bisphenol A-epichlorohydrin-polyethylene glycol ether with bisphenol A (2:1) polymer-N 1-(1,3-dimethylbutylidene)-N 2-[2-[(1, 3-dimethylbutylidene)amino]ethyl]-1,2-ethanediamine-dialdehyde-2-(methylamino)ethanol reaction products sulfamates(salts). P-16-0388 12/22/2016 3/22/2017 CBI (G) Hardener for epoxy coating (G) Aliphatic polyamines, polymers with bisphenol A and epichlorohydrin. P-16-0399 12/22/2016 3/22/2017 Tryeco LLC (S) Agricultural soil amendment for turf applications and direct soil injection with fertilizers (S) Starch, polymer with 2-propenoic acid, potassium salt. oxidized. P-16-0399 12/22/2016 3/22/2017 Tryeco LLC (S) Compound to be used in preparation of advanced seed coatings (S) Starch, polymer with 2-propenoic acid, potassium salt. oxidized. P-16-0399 12/22/2016 3/22/2017 Tryeco LLC (S) Agricultural soil amendment for filed crops as “agrisorb plus” granular soil amendment (S) Starch, polymer with 2-propenoic acid, potassium salt. oxidized. P-16-0446 12/5/2016 3/5/2017 Allnex USA Inc. (S) Resin in architectural primer coatings (G) Fatty acids, reaction products with alkylamine, polymers with substituted carbomonocycle, substituted alkylamines, heteromonocycle and substituted alkanoate, lactates (salts). P-16-0486 12/15/2016 3/15/2017 CBI (G) Isolated intermediate in the production of a refrigerant precursor (G) Polychloropropane. P-16-0505 12/5/2016 3/5/2017 CBI (S) Polymeric resin for ultraviolet (uv) curable acrylates (S) Poly[oxy(methyl- 1, 2- ethanediyl) ] , alpha- (1- oxo- 2- propen- 1- yl)—omega- [(1- oxo- 2- propen- 1- yl) oxy] -. P-16-0505 12/5/2016 3/5/2017 CBI (S) Polymeric resin for uv curable acrylates (S) Poly[oxy(methyl- 1, 2- ethanediyl) ] , a- (1- oxo- 2- propen- 1- yl)—q- [(1- oxo- 2- propen- 1- yl) oxy] -. P-16-0513 12/28/2016 3/28/2017 CBI (S) Intermediate for further reaction (G) Alkylphenol. P-16-0530 12/6/2016 3/6/2017 CBI (S) Concrete and stone coating (S) 2-propenoic acid, 2-methyl, 2-(dimethylamino) ethyl ester, polymer with ethyl 2-prpenoate, 2-hydroxyethyl m2-propenoate and methyl 2-methyl 2-propenoate, acetate salt. P-16-0543 12/19/2016 3/19/2017 CBI (G) Battery ingredient (G) Halogenophosphoric acid metal salt. P-16-0547 12/21/2016 3/21/2017 CBI (G) Catalyst (G) Neodymium aluminium alkyl polymer complex. P-16-0589 12/19/2016 3/19/2017 CBI (G) Synthetic aircraft engine lubricant for Contained use industrial lubricant (G) Pentaerythritol ester of mixed linear and branched carboxylic acids. P-16-0591 12/9/2016 3/9/2017 Chromatic Technologies, Inc (G) Component of printing ink (G) Alkyl bis-phenol. P-16-0591 12/9/2016 3/9/2017 Chromatic Technologies, Inc (G) Component of colorants (G) Alkyl bis-phenol. Start Printed Page 13343 P-17-0013 12/21/2016 3/21/2017 CBI (G) Open dispersive use component in liquid paint coating (G) Formaldehyde, polymer with arylylpolyamine, 2-(chloromethyl)oxirane and phenol. P-17-0107 12/13/2016 3/13/2017 CBI (S) Coreactant used in an adhesive (G) Hydroxyl terminated polyurethane of methylene diphenyldiisocyanate based on polyester and polyether-polyol. P-17-0121 12/6/2016 3/6/2017 CBI (S) Polyurethane used in an adhesive (G) Methylene diphenyl diisocyanate terminated polyurethane resin. P-17-0127 12/6/2016 3/6/2017 Spectrum Tracer Services (S) Chemical tracer pumped into an oil or gas well to monitor well performance (G) Halogenated benzoic acid ethyl ester. P-17-0139 12/6/2016 3/6/2017 Spectrum Tracer Services (S) Chemical tracer pumped into an oil or gas well to monitor well performance (G) Halogenated benzoic acid ethyl ester. P-17-0146 12/2/2016 3/2/2017 CBI (G) Coatings polymer (G) Aromaticpolycarboxylic acid, polymer with [(aminoalkyl)amino]alkanol,(chloroalkyl)oxirane homopolymer etherwith polyalkyleneoxide,alkanedioic acid, alkyldiol, heterocyclicketone, alicyclic polyisocyanate, polyalkyleneoxide monoalkylether and polyalkoxyalkylajmine, reaction products with N-alkylalyklamine, alkylcarboxylate (salts). P-17-0146 12/2/2016 3/2/2017 CBI (G) Ink binder polymer (G) Aromaticpolycarboxylic acid, polymer with [(aminoalkyl)amino]alkanol,(chloroalkyl)oxirane homopolymer etherwith polyalkyleneoxide,alkanedioic acid, alkyldiol, heterocyclicketone, alicyclic polyisocyanate, polyalkyleneoxide monoalkylether and polyalkoxyalkylajmine, reaction products with N-alkylalyklamine, alkylcarboxylate (salts). P-17-0157. 12/20/2016 3/20/2017 CBI (G) Binder used in coating manufacture (G) Silane amine carbonate. P-17-0163 12/8/2016 3/8/2017 CBI (G) Chemical precursor (G) Substituted benzofuropyridine. P-17-0164 12/7/2016 3/7/2017 CBI (G) Intermediate chemical (G) Substituted benzofuropyridine. P-17-0165 12/5/2016 3/5/2017 CBI (G) Electronic device use (G) Fluorocyanophenyl alkylbenzoate. P-17-0166 12/12/2016 3/12/2017 CBI (G) Additive in adhesive dispersions (G) Rosin polymer, glycol ester. P-17-0167 12/12/2016 3/12/2017 CBI (G) Additive in adhesive dispersions (G) Rosin polymer, glycol ester. P-17-0170 12/8/2016 3/8/2017 Allnex Usa Inc. (S) Uv curable coating resin for 3d printing applications (G) Alkanediol, 2,2-bis (substituted alkyl)-, polymer with substituted alkane, heteromonocycles, alkenoate. P-17-0171 12/19/2016 3/19/2017 Classic Dyestuffs (S) Solvent dye for use as ink in hot foil stamping (S) 1,3-benzenedisulfonic acid, 4-[2-(5-cyano-1-ethyl-1,6-dihydro-2-hydroxy-4-methyl-6-oxo-3-pyridinyl)diazenyl]-, sodium salt (1:2). P-17-0172 12/8/2016 3/8/2017 CBI (G) Lubricating oil additive (G) Sulfurized alkylphenol, calcium salts. P-17-0173 12/14/2016 3/14/2017 CBI (G) Chemical/polymer modification (G) Polydimethysiloxane eugenol group-terminated. P-17-0174 12/12/2016 3/12/2017 CBI (G) Plastics additive (G) Alkyltriethoxysilylpolysiloxane. Start Printed Page 13344 P-17-0176 12/12/2016 3/12/2017 CBI (G) Battery ingredient (G) Carbonic acid, alkyl carbomonocyclic ester. P-17-0177 12/13/2016 3/13/2017 Shin-Etsu Microsi (G) Microlithography for electronic device Manufacturing (G) Monoheteropentacycloalkane-4-carboxylic acid, substituted-cycloalkyl ester. P-17-0178 12/13/2016 3/13/2017 Shin-Etsu Microsi (G) Microlithography for electronic device manufacturing (G) Sulfonium, triphenyl-, salt with substituted-alkyl 4-substituted-benzoate. P-17-0179 12/21/2016 3/21/2017 CBI (S) Modified carboxypolyamine salt used as a dispersing additive for pigments in industrial paints and coatings (G) Modified carboxypolyamine salt. P-17-0180 12/20/2016 3/20/2017 CBI (S) Modified acids polymer with polyols and anhydride used as a dispersing additive for pigments in industrial paints and coatings (G) Modified acids polymer with polyols and anhydride. P-17-0181 12/16/2016 3/16/2017 CBI (G) Polymeric dispersant (G) 2-propanol, aklylamino, polymer with 2,4-diisocyanato-1-methylbenzene and 2,2′-iminobis[ethanol], 2-oxepanone homopolymer lauryl ester- and polypropylene glycol 2-aminomethylethyl branched nonylphenyl ether-blocked. P-17-0184 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Transportation washes (S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N-[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt. P-17-0184 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Industrial all-purpose cleaners (S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N-[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt. P-17-0184 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Personal care products, shampoos, facial washes (S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N-[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt. P-17-0184 12/20/2016 3/20/2017 Colonial Chemical, Inc (S) Firefighting foams (S) 1-propanaminium, 2-hydroxy-N, N-dimethyl-N-[3-[(1-oxooctyl-amino]propyl]-3-sulfo-, inner salt. P-17-0185 12/20/2016 3/20/2017 CBI (G) Additive, open, non-dispersive use (G) Fatty acids, C18-unsaturated (unsatd.), dimers, hydrogenated, polymers with C18-unsatd. fatty acid trimers, alkylenediamine and hydroxyalkanoic acid. P-17-0186 12/20/2016 3/20/2017 CBI (G) Additive, open, non-dispersive use (G) 2,5-furandione, telomer with 1,1′-(1,1-dimethyl-3-methylene-1,3-propanediyl)bis[benzene] and ethenylbenzene, carbonmonocycle alkyl ester, esters with polyalkylene glycol mono alkyl ethers, ammonium salts, 2,2′-(1,2-diazenediyl)bis[2-methylbutanenitrile]-initiated. P-17-0190 12/26/2016 3/26/2017 CBI (G) A polymer in paints and architectural coatings (G) Butanoic acid, 3-oxo-, 2-[(2-methyl-1-oxo-2-propen-1-yl)oxy]ethyl ester, polymer with cycloalkyl 2-methyl-2-propenoate, ethenylbenzene, 2-ethylhexyl 2- propenoate, methyl 2-methyl-2-propenoate and 2-methylpropyl 2-methyl-2- propenoate. For the 10 NOCs received by EPA during this period, Table 2 provides the following information (to the extent that such information is not claimed as CBI): The EPA case number assigned to the NOC; the date the NOC was received by EPA; the projected date of commencement provided by the submitter in the NOC; and the chemical identity.Start Printed Page 13345
Start SignatureTable 2—NOCs Received From December 1, 2016 to December 30, 2016
Case No. Received date Commencement date Chemical J-15-0033 12/22/2016 12/21/2016 (G) Modified trichoderma reesei strain. J-16-0033 12/19/2016 12/4/2016 (G) Saccharomyces cerevisiae, modified to express glucoamylase activity. P-07-0177 12/15/2016 9/11/2007 (S) Isocyanic acid, polymethylenepolyphenylene ester, polymer with methoxylated dehydrochlorinated brominated 2-butyne-1,4-diolepichlorohydrin polymer. P-07-0395 12/5/2016 7/29/2007 (G) Dialkyl formamide. P-14-0713 12/7/2016 11/20/2016 (S) Plastics, wastes, pyrolyzed, C5-12 oil. P-14-0714 12/7/2016 11/20/2016 (S) Plastics, wastes, pyrolyzed, C9-20 pyrolysis oil. P-14-0715 12/7/2016 11/20/2016 (S) Waste plastics, pyrolyzed, C20-55 fraction. P-16-0074 12/20/2016 12/1/2016 (G) Isocyanate terminated polyurethane. P-16-0248 12/5/2016 11/18/2016 (G) Poly(oxy-1,2-ethanediyl), éq,éq′-[(1,methylethylidene)di-4,1-phenylene]bis[ïq-hydroxy-, polymer with aliphatic diisocyanate, propylene glycol monomethacrylate-blocked. P-16-0492 12/21/2016 12/10/2016 (G) Polyester-amide polymer of ‘isophthalic acid’ with diamino-alkane, cyclohexane-dialcohol, alkanetriol, di-isocyanate and acrylic acid-ethylene copolymer. Dated: January 30, 2017.
Pamela Myrick,
Director, Information Management Division, Office of Pollution Prevention and Toxics.
[FR Doc. 2017-04772 Filed 3-9-17; 8:45 am]
BILLING CODE 6560-50-P
Document Information
- Published:
- 03/10/2017
- Department:
- Environmental Protection Agency
- Entry Type:
- Notice
- Action:
- Notice.
- Document Number:
- 2017-04772
- Dates:
- Comments identified by the specific case number provided in this document, must be received on or before April 10, 2017.
- Pages:
- 13339-13345 (7 pages)
- Docket Numbers:
- EPA-HQ-OPPT-2016-0697, FRL-9958-32
- PDF File:
- 2017-04772.Pdf