2018-05022. Stainless Steel Butt-Weld Pipe Fittings From Italy: Preliminary Results of Antidumping Duty Administrative Review; 2016-2017  

  • Start Preamble

    AGENCY:

    Enforcement and Compliance, International Trade Administration, Department of Commerce.

    SUMMARY:

    The Department of Commerce (Commerce) preliminarily determines that sales of subject merchandise by Filmag Italia Spa (Filmag) were not made at less than normal value during the period of review (POR) February 1, 2016, through January 31, 2017. Interested parties are invited to comment on these preliminary results.

    DATES:

    Applicable March 13, 2018.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    John Drury or Kent Boydston, AD/CVD Operations, Office VI, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-0195 or (202) 482-5649, respectively.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Background

    On April 10, 2017, Commerce published in the Federal Register the notice of initiation of an administrative review of the AD order on stainless steel butt-weld pipe fittings (SSBW pipe fittings) from Italy for the period February 1, 2016, through January 31, 2017.[1] Commerce initiated a review with respect to one company, Filmag. On October 31, 2017, Commerce extended the preliminary results of review until January 2, 2018.[2] On December 28, 2017, Commerce extended the preliminary results of review until February 28, 2018.[3]

    Commerce exercised its discretion to toll all deadlines affected by the closure of the Federal Government from January 20 through 22, 2018. If the new deadline falls on a non-business day, in accordance with Commerce's practice, the deadline will become the next business day. The revised deadline for the final results of this review is now March 5, 2018.[4]

    Scope of the Order

    The merchandise covered by the order is certain stainless steel butt-weld pipe fittings from Italy.[5] Stainless steel butt-weld pipe fittings are under 14 inches in outside diameter (based on nominal pipe size), whether finished or unfinished. The product encompasses all grades of stainless steel and “commodity” and “specialty” fittings. Specifically excluded from the definition are threaded, grooved, and bolted fittings, and fittings made from any material other than stainless steel.

    The butt-weld fittings subject to the order are currently classifiable under subheading 7307.23.0000 of the Harmonized Tariff Schedule of the United States (HTSUS). Although the HTSUS subheading is provided for convenience and customs purposes, the written description of the scope of the order is dispositive. A full description of the scope of the order is contained in the memorandum from Christian Marsh, Deputy Assistant Secretary for Start Printed Page 10840Enforcement and Compliance, to Gary Taverman, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance, titled “Decision Memorandum for Preliminary Results of Antidumping Duty Administrative Review: Stainless Steel Butt-Weld Pipe Fittings from Italy; 2016-2017” (Preliminary Decision Memorandum), which is issued concurrent with these results and hereby adopted by this notice.

    Methodology

    Commerce is conducting this review in accordance with sections 751(a)(1)(B) and (2) of the Tariff Act of 1930, as amended (the Act). Export price has been calculated in accordance with section 772 of the Act. Normal value has been calculated in accordance with section 773 of the Act. For a full description of the methodology underlying our conclusions, see the Preliminary Decision Memorandum.

    The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). Access to ACCESS is available to registered users at http://access.trade.gov and is available to all parties in the Central Records Unit, Room B8024 of the main Department of Commerce building. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly on the internet at http://enforcement.trade.gov/​frn/​index.html. A list of topics discussed in the Preliminary Decision Memorandum is attached as an Appendix to this notice. The signed Preliminary Decision Memorandum and the electronic versions of the Preliminary Decision Memorandum are identical in content.

    Preliminary Results of Review

    We preliminarily determine that, for the period February 1, 2016, through January 31, 2017, the following dumping margin exists:

    Manufacturer/exporterWeighted-average margin (percent)
    Filmag Italia Spa0.00

    Disclosure and Public Comment

    Commerce intends to disclose to parties to the proceeding any calculations performed in connection with these preliminary results of review within five days after the date of publication of this notice.[6] Interested parties may submit case briefs to Commerce in response to these preliminary results no later than 30 days after the publication of these preliminary results.[7] Rebuttal briefs, the content of which is limited to the issues raised in the case briefs, must be filed within five days from the deadline date for the submission of case briefs.[8]

    Parties who submit arguments in this proceeding are requested to submit with each argument: (1) A statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.[9] Case and rebuttal briefs should be filed using ACCESS.[10] Case and rebuttal briefs must be served on interested parties.[11] Executive summaries should be limited to five pages total, including footnotes.

    Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing must submit a written request to the Assistant Secretary for Enforcement and Compliance within 30 days of the date of publication of this notice. Requests should contain: (1) The party's name, address and telephone number; (2) the number of participants; and (3) a list of issues parties intend to discuss. Issues raised in the hearing will be limited to those raised in the respective case and rebuttal briefs. If a request for a hearing is made, Commerce intends to hold the hearing at the U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, at a date and time to be determined.[12] Parties should confirm the date, time, and location of the hearing by telephone two days before the scheduled date.

    Commerce intends to publish the final results of this administrative review, including the results of its analysis of issues addressed in any case or rebuttal brief, no later than 120 days after publication of these preliminary results, unless extended.[13]

    Assessment Rates

    Upon issuance of the final results in this administrative review, Commerce shall determine, and Customs and Border Protection (CBP) shall assess, antidumping duties on all appropriate entries.[14] If Filmag's weighted-average dumping margin is not zero or de minimis in the final results of this review, we will calculate importer- or customer-specific ad valorem assessment rates for the merchandise based on the ratio of the total amount of antidumping duties calculated for the examined sales made during the period of review to the total customs value of the sales used to calculate those duties in accordance with 19 CFR 351.212(b)(1). Where an importer-specific ad valorem assessment rate is zero or de minimis, we will instruct CBP to liquidate the appropriate entries without regard to antidumping duties in accordance with 19 CFR 351.106(c)(2). If the respondent's weighted-average dumping margin is zero or de minimis in the final results of review, we will instruct CBP liquidate the appropriate entries without regard to duties in accordance with the Final Modification for Reviews, i.e., “{w}here the weighted-average margin of dumping for the exporter is determined to be zero or de minimis, no antidumping duties will be assessed.” [15]

    We intend to issue liquidation instructions to CBP 15 days after publication of the final results of this review.

    Cash Deposit Requirements

    The following cash deposit requirements will be effective upon publication of the final results of this administrative review for all shipments of the subject merchandise entered, or withdrawn from warehouse, for consumption on or after the publication date of the final results of this administrative review, as provided by section 751(a)(2)(C) of the Act: (1) The cash deposit rate for Filmag will be that established in the final results of this administrative review; (2) for previously reviewed or investigated companies, the cash deposit rate will continue to be the company-specific rate published for the most recent period; (3) if the exporter is not a firm covered in this review, a prior review, or in the investigation but the manufacturer is, the cash deposit rate will be the rate established for the most recent review period for the manufacturer of the merchandise; and (4) the cash deposit rate for all other manufacturers or exporters will continue to be the all-others rate of 26.59 percent, the rate established in the Start Printed Page 10841investigation of this proceeding.[16] These cash deposit requirements, when imposed, shall remain in effect until further notice.

    Notification to Importers

    This notice also serves as a reminder to importers of their responsibility under 19 CFR 351.402(f)(2) to file a certificate regarding the reimbursement of antidumping duties prior to liquidation of the relevant entries during this review period. Failure to comply with this requirement could result in Commerce's presumption that reimbursement of antidumping duties occurred and the subsequent assessment of double antidumping duties.

    We are issuing and publishing this notice in accordance with sections 751(a)(1) and 777(i)(1) of the Act.

    Start Signature

    Dated: March 5, 2018.

    Gary Taverman,

    Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

    End Signature

    Appendix—List of Topics Discussed in the Preliminary Decision Memorandum

    1. Background

    2. Scope of the Order

    3. Date of Sale

    4. Comparisons to Normal Value

    A. Product Comparisons

    B. Determination of Comparison Method

    C. Export Price

    D. Normal Value

    1. Home Market Viability

    2. Level of Trade

    3. Cost of Production

    4. Calculation of Normal Value Based on Comparison Market Prices

    5. Price-to-Constructed Value Comparison

    E. Currency Conversion

    5. Recommendation

    End Supplemental Information

    Footnotes

    1.  See Initiation of Antidumping and Countervailing Duty Administrative Reviews, 82 FR 17188 (April 10, 2017).

    Back to Citation

    2.  See Memorandum to James Maeder, Senior Director performing the duties of Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, from John K. Drury, International Trade Compliance Analyst, Office VI, “Stainless Steel Butt-Weld Pipe Fittings from Italy: Extension of Deadline for Preliminary Results of Antidumping Duty Administrative Review; 2016-2017,” dated October 31, 2017.

    Back to Citation

    3.  See Memorandum to Edward Yang, Senior Director, Office VII, from Kent Boydston, International Trade Compliance Analyst, Office VI, “Stainless Steel Butt-Weld Pipe Fittings from Italy: Extension of Deadline for Preliminary Results of Antidumping Duty Administrative Review; 2016-2017,” dated December 28, 2017.

    Back to Citation

    4.  See Memorandum for The Record from Christian Marsh, Deputy Assistant Secretary for Enforcement and Compliance, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance, “Deadlines Affected by the Shutdown of the Federal Government” (Tolling Memorandum), dated January 23, 2018. All deadlines in this segment of the proceeding have been extended by 3 days.

    Back to Citation

    5.  See Antidumping Duty Orders: Stainless Steel Butt-Weld Pipe Fittings from Italy, Malaysia, and the Philippines, 66 FR 11257 (February 23, 2001).

    Back to Citation

    6.  See 19 CFR 351.224(b).

    Back to Citation

    10.  See generally 19 CFR 351.303.

    Back to Citation

    13.  See section 751(a)(3)(A) of the Act; 19 CFR 351.213(h).

    Back to Citation

    15.  See Antidumping Proceedings: Calculation of the Weighted-Average Dumping Margin and Assessment Rate in Certain Antidumping Proceedings: Final Modification, 77 FR 8101, 8102 (February 14, 2012) (Final Modification for Reviews).

    Back to Citation

    16.  See Notice of Final Determination of Sales at Less Than Fair Value: Stainless Steel Butt-Weld Pipe Fittings from Italy, 65 FR 81830 (December 27, 2000).

    Back to Citation

    [FR Doc. 2018-05022 Filed 3-12-18; 8:45 am]

    BILLING CODE 3510-DS-P

Document Information

Published:
03/13/2018
Department:
International Trade Administration
Entry Type:
Notice
Document Number:
2018-05022
Dates:
Applicable March 13, 2018.
Pages:
10839-10841 (3 pages)
Docket Numbers:
A-475-828
PDF File:
2018-05022.Pdf
Supporting Documents:
» Requests for Nominations: Trade Promotion Coordinating Committee
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Drawn Stainless Steel Sinks from the People's Republic of China; Recission
» Determinations of Sales at Less than Fair Value: Certain Carbon and Alloy Steel Cut-to-Length Plate from Brazil, South Africa, and Republic of Turkey
» Meetings: United States Travel and Tourism Advisory Board
» Investigations; Determinations, Modifications, and Rulings, etc.: Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Heavy Walled Rectangular Welded Carbon Steel Pipes and Tubes from Republic of Turkey
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Carbon and Alloy Steel Cut-to-Length Plate from People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Pasta from Italy
» Determinations of Sales at Less Than Fair Value: Truck and Bus Tires From People's Republic of China
» Antidumping or Countervailing Duty Investigations, Orders, or Reviews: Initiation of Five-Year (Sunset) Review