[Federal Register Volume 64, Number 57 (Thursday, March 25, 1999)]
[Notices]
[Page 14436]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 99-7226]
=======================================================================
-----------------------------------------------------------------------
CONSUMER PRODUCT SAFETY COMMISSION
[CPSC Docket No. 99-1]
Cadet Manufacturing Company; Prehearing Conference
AGENCY: Consumer Product Safety Commission.
ACTION: Notice of first prehearing conference.
-----------------------------------------------------------------------
DATE: This notice announces a prehearing conference to be held in the
matter of Cadet Manufacturing Company on April 12, 1999, at 1:00 p.m.
(EDT).
Location: The prehearing conference will be via conference
telephone call. Pursuant to 16 C.F.R. 1025.21(d) and 1025.47, the
conference shall be stenographically reported.
FOR FURTHER INFORMATION CONTACT: For additional information contact
Sadye E. Dunn, Secretary, U.S. Consumer Product Safety Commission,
Washington, DC 20207; telephone (301) 504-0800, ext. 1230; facsimile
(301) 504-0127.
SUPPLEMENTARY INFORMATION: This public notice is issued pursuant to 16
CFR 1025.21(b) of the U.S. Consumer Product Safety Commission's Rules
of Practice for Adjudicative Proceedings to inform the public that a
prehearing conference will be held in an administrative proceeding
under Section 15 of the Consumer Product Safety Act (CPSA), captioned
CPSC Docket No. 99-1, In the Matter of Cadet Manufacturing Company
(``Cadet''). The Presiding Officer in the proceeding is United States
Administrative Law Judge William B. Moran. The Presiding Officer has
determined that, for good and sufficient cause, the time period for
holding this first prehearing conference had to be extended to the date
announced above, which date is beyond the fifty (50) day period
referenced in 16 CFR 1025.21(a).
The public is referred generally to the Code of Federal Regulations
citation listed above for identification of the issues to be raised at
the conference, but the chief purpose will be to establish a schedule
for discovery and for the initial exchange of witness lists, prepared
testimony, and documents. The public is also advised that the date,
time and location of the hearing will be established at the conference.
Substantively, the issue being litigated in this proceeding is
described by the Presiding Officer as whether, as alleged in the
Complaint, certain electric in-wall heaters manufactured by Cadet are
defective in that their design causes overheating and fire hazards. The
Complaint also asserts that the identified models have manufacturing or
assembly defects created by inadequate or faulty components and/or
contacts which cause overheating and multiple fire-related hazards.
On this basis it is alleged that the heater models identified in
the Complaint present a ``substantial product hazard'' within the
meaning of Section 15(a)(2) of the CPSA, 15 U.S.C. 2064(a)(2).
In response, Cadet's Answer denies, generally and specifically, the
allegations that its products are defective and that its heaters
present a substantial product hazard within the meaning of the CPSA.
Should the allegations be proven, Complaint Counsel for the Office
of Compliance of the U.S. Consumer Product Safety Commission seeks a
finding that the product presents a substantial product hazard and that
public notification be made pursuant to section 15(c) of the CPSA and
that other appropriate relief be directed, as set forth in the
Complaint.
Dated: March 19, 1999.
Sadye E. Dunn,
Secretary, Consumer Product Safety Commission.
[FR Doc. 99-7226 Filed 3-24-99; 8:45 am]
BILLING CODE 6355-01-M
