2018-04391. Diamond Sawblades and Parts Thereof From the People's Republic of China: Notice of Covered Merchandise Referral

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

Pursuant to the Enforce and Protect Act of 2015 (EAPA), the Department of Commerce (Commerce) received a covered merchandise referral from U.S. Customs and Border Protection (CBP) in connection with a CBP Enforce and Protect Act (EAPA) investigation concerning the antidumping duty (AD) order on diamond sawblades and parts thereof (diamond sawblades) from the People's Republic of China (China). In accordance with EAPA, Commerce intends to determine whether the merchandise subject to the referral is covered by the scope of the order and promptly transmit its determination to CBP. Commerce is providing notice of the referral and inviting participation from interested parties.

DATES:

Applicable March 5, 2018.

FOR FURTHER INFORMATION CONTACT:

Yang Jin Chun at [phone] or Minoo Hatten at [phone], AD/CVD Operations Office I, Enforcement & Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230.

SUPPLEMENTARY INFORMATION:

Background

On February 24, 2016, the Trade Facilitation and Trade Enforcement Act of 2015 was signed into law, which contains Title IV—Prevention of Evasion of Antidumping and Countervailing Duty Orders (short title “Enforce and Protect Act of 2015” or “EAPA”) (Pub. L. 114-125, 130 Stat. 122, 155, Feb. 24, 2016). Effective August 22, 2016, section 421 of the EAPA added section 517 to the Tariff Act of 1930, as amended (the Act), which establishes a formal process for CBP to investigate allegations of the evasion of antidumping and countervailing duty (AD/CVD) orders. Section 517(b)(4)(A) of the Act provides a procedure whereby if, during the course of an EAPA investigation, CBP is unable to determine whether the merchandise at issue is covered merchandise within the meaning of section 517(a)(3) of the Act, it shall refer the matter to Commerce to make such a determination. Section 517(a)(3) of the Act defines covered merchandise as merchandise that is subject to an antidumping duty order issued under section 736 of the Act or a countervailing duty order issued under section 706 of the Act. Section 517(b)(4)(B) of the Act states that Commerce, after receiving a covered merchandise referral from CBP, shall determine whether the merchandise is covered merchandise and promptly transmit its determination to CBP. The Act does not establish a deadline within which Commerce must issue its determination.

On November 21, 2017, Commerce received a covered merchandise referral from CBP regarding CBP EAPA Investigation No. 7184 ^[1] which concerns the AD order on diamond sawblades from China.^[2] Specifically, based on an allegation by Diamond Sawblades Manufacturers Coalition (DSMC), CBP has requested that Commerce issue a determination as to whether diamond sawblades, imported by Diamond Tools Technology LLC (“DTT USA”), that are laser welded in Thailand by Diamond Tools Technology (Thailand), Ltd. (“DTT Thailand”) from: (1) Cores from Thailand and segments from China, (2) segments and cores that are both produced in China, and/or (3) cores from China and segments from Thailand, are merchandise subject to the AD order on diamond sawblades from China.

Notification to Interested Parties

Commerce is hereby notifying interested parties that it has received the covered merchandise referral referenced above, will begin a new segment of the proceeding, and intends to issue a determination regarding whether the merchandise subject to the referral is covered merchandise within the meaning of section 517(a)(3) of the Act. Additionally, Commerce intends to provide interested parties with the opportunity to participate in this segment of the proceeding, including through the submission of comments, and, if appropriate, new factual information and verification. Specifically, Commerce will notify parties on the segment-specific service list for this segment of the proceeding of a schedule for comments. In addition, Commerce may request factual information from any person to assist in making its determination and may verify submissions of factual information, if Commerce determines that such verification is appropriate. Commerce intends to issue a final determination within 120 days of the publication of this notice (this deadline may be extended if it is not practicable to complete the final determination within 120 days), and will promptly transmit its final determination to CBP in accordance with section 517(b)(4)(B) of the Act.

Parties are also hereby notified that this is the only notice that Commerce intends to publish in the Federal Register concerning this covered merchandise referral. Therefore, interested parties that wish to participate in this segment of the proceeding, and receive notice of the final determination, must submit their letters of appearance as discussed below. Further, any party desiring access to business proprietary information in this segment of the proceeding must file an application for access to business proprietary information under administrative protective order (APO), as discussed below.

Finally, we note that covered merchandise referrals constitute a new type of segment of a proceeding at Commerce and, therefore, Commerce will continue to develop its practice and procedures in this area. Additionally, we note that Commerce has recently initiated an anti-circumvention inquiry pursuant to section 781 of the Act concerning merchandise which may be similar to the merchandise at issue in the covered merchandise referral referenced above.^[3] Thus, Commerce may consider any potential overlapping issues in these separate segments of the proceeding.

Scope of the AD Order on Diamond Sawblades From China

The products covered by the order are all finished circular sawblades, whether slotted or not, with a working part that is comprised of a diamond segment or segments, and parts thereof, regardless of specification or size, except as specifically excluded below. Within the scope of the order are semifinished diamond sawblades, including diamond sawblade cores and diamond sawblade segments. Diamond sawblade cores are circular steel plates, whether or not attached to non-steel plates, with slots. Diamond sawblade cores are manufactured principally, but not exclusively, from alloy steel. A diamond sawblade segment consists of a mixture of diamonds (whether natural or synthetic, and regardless of the quantity of diamonds) and metal powders (including, but not limited to, iron, cobalt, nickel, tungsten carbide) that are formed together into a solid shape (from generally, but not limited to, a heating and pressing process).

Sawblades with diamonds directly attached to the core with a resin or electroplated bond, which thereby do not contain a diamond segment, are not included within the scope of the order. Diamond sawblades and/or sawblade cores with a thickness of less than 0.025 inches, or with a thickness greater than 1.1 inches, are excluded from the scope of the order. Circular steel plates that have a cutting edge of non-diamond material, such as external teeth that protrude from the outer diameter of the plate, whether or not finished, are excluded from the scope of the order. Diamond sawblade cores with a Rockwell C hardness of less than 25 are excluded from the scope of the order. Diamond sawblades and/or diamond segment(s) with diamonds that predominantly have a mesh size number greater than 240 (such as 250 or 260) are excluded from the scope of the order. Merchandise subject to the order is typically imported under heading 8202.39.00.00 of the Harmonized Tariff Schedule of the United States (HTSUS). When packaged together as a set for retail sale with an item that is separately classified under headings 8202 to 8205 of the HTSUS, diamond sawblades or parts thereof may be imported under heading 8206.00.00.00 of the HTSUS. On October 11, 2011, Commerce included the 6804.21.00.00 HTSUS classification number to the customs case reference file, pursuant to a request by CBP.^[4]

The tariff classifications are provided for convenience and customs purposes; however, the written description of the scope of the order is dispositive.

Filing Requirements

All submissions to Commerce must be filed electronically using ACCESS.^[5] An electronically filed document must be received successfully in its entirety by the time and date it is due. Documents exempted from the electronic submission requirements must be filed manually (i.e., in paper form) with Enforcement and Compliance's APO/Dockets Unit, Room 18022, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230, and stamped with the date of receipt by the applicable deadlines.

Letters of Appearance and Administrative Protective Order

Interested parties that wish to participate in this segment of the proceeding and be added to the public service list for this segment of the proceeding must file a letter of appearance in accordance with 19 CFR 351.103(d)(1), with one exception: The parties publicly identified by CBP in the covered merchandise referral (referenced above) are not required to submit a letter of appearance, and will be added to the public service list for this segment of the proceeding by Commerce.

Commerce placed an APO on the record on December 20, 2017,^[6] and established the APO service list for use in this segment. Commerce intends to place the business proprietary versions of the documents contained in the covered merchandise referral on the record of this proceeding in ACCESS within five days of publication of this notice.

Interested parties must submit applications for disclosure under the APO in accordance with the procedures outlined in Commerce's regulations at 19 CFR 351.305. Those procedures apply to this segment of the proceeding, with one exception: APO applicants representing the parties that have been identified by CBP as an importer in the covered merchandise referral (referenced above) are exempt from the additional filing requirements for importers pursuant to 19 CFR 351.305(d).

Dated: February 22, 2018.

Christian Marsh,

Deputy Assistant Secretary for Enforcement and Compliance.

Footnotes

1.  See Letter from CBP, “Scope Referral Request for merchandise under EAPA Investigation 7184, imported by Diamond Tools Technology LLC and concerning the investigation of evasion of the antidumping duty order on diamond sawblades from the People's Republic of China (A-570-900),” dated November 21, 2017. Commerce intends to make available this document and any supporting documents on Enforcement and Compliance's Antidumping Duty and Countervailing Duty Centralized Electronic Service System (ACCESS) within five days of publication of this notice.

2.  See Diamond Sawblades and Parts Thereof from the People's Republic of China and the Republic of Korea: Antidumping Duty Orders, 74 FR 57145 (November 4, 2009).

3.  See Diamond Sawblades and Parts Thereof from the People's Republic of China: Initiation of Anti-circumvention Inquiry, 82 FR 57709 (December 7, 2017).

4.  See Diamond Sawblades and Parts Thereof from the Republic of Korea: Preliminary Results of Antidumping Duty Administrative Review, 76 FR 76128, 76130 (December 6, 2011).

5.  See Antidumping and Countervailing Duty Proceedings: Electronic Filing Procedures; Administrative Protective Order Procedures, 76 FR 39263 (July 6, 2011), as amended in Enforcement and Compliance; Change of Electronic Filing System Name, 79 FR 69046 (November 20, 2014) for details of Commerce's electronic filing requirements, effective August 5, 2011. Information on help using ACCESS can be found at https://access.trade.gov/​help.aspx and a handbook can be found at https://access.trade.gov/​help/​Handbook%20on%20Electronic%20Filing%20Procedures.pdf.

6.  See the Administrative Protective Order “In the Matter of the Scope Inquiry of the Antidumping Duty Order on Diamond Sawblades from the People's Republic Of China (A-570-900) (CBP EAPA Inv. No. 7148),” dated December 20, 2017.