[Federal Register Volume 63, Number 44 (Friday, March 6, 1998)]
[Notices]
[Page 11317]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-5806]
-----------------------------------------------------------------------
NUCLEAR REGULATORY COMMISSION
[Docket No. 50-220]
Niagara Mohawk Power Corporation; Notice of Withdrawal of
Application for Amendment to Facility Operating License
The U.S. Nuclear Regulatory Commission (the Commission) is
permitting the withdrawal of Niagara Mohawk Power Corporation's (the
licensee) application of September 26, 1996, regarding the proposed
amendment to Facility Operating License No. DPR-63 for Nine Mile Point
Nuclear Station, Unit No. 1, located in Oswego County, New York.
The proposed amendment would have revised the facility technical
specifications by adding Specification 3.7.2/4.7.2, ``Special Test
Exception--System Leakage and Hydrostatic Testing.''
The Commission had previously issued a Notice of Consideration of
Issuance of Amendment published in the Federal Register on November 21,
1996 (61 FR 59248). However, by letter dated February 2, 1998, the
licensee withdrew the proposed change.
For further details with respect to this action, see the
application for amendment dated September 26, 1996, as supplemented by
letter dated May 6, 1997, and the licensee's letter dated February 2,
1998, which withdrew the application for license amendment. The above
documents are available for public inspection at the Commission's
Public Document Room, the Gelman Building, 2120 L Street, NW.,
Washington, DC, and at the local public document room located at the
Reference and Documents Department, Penfield Library, State University
of New York, Oswego, New York 13126.
Dated at Rockville, Maryland, this 2nd day of March 1998.
For the Nuclear Regulatory Commission.
Darl S. Hood,
Senior Project Manager, Project Directorate I-1, Division of Reactor
Projects-I/II, Office of Nuclear Reactor Regulation.
[FR Doc. 98-5806 Filed 3-5-98; 8:45 am]
BILLING CODE 7590-01-M
