2019-04048. Large Diameter Welded Pipe From India: Antidumping Duty Order  

  • Start Preamble

    AGENCY:

    Enforcement and Compliance, International Trade Administration, Department of Commerce.

    SUMMARY:

    Based on affirmative final determinations by the Department of Commerce (Commerce) and the International Trade Commission (ITC), Commerce is issuing an antidumping duty order on large diameter welded carbon and alloy steel line pipe from India.

    DATES:

    Applicable March 6, 2019.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Kate Johnson at (202) 482-4929 or Jaron Moore at (202) 482-3640, AD/CVD Operations, Enforcement and Compliance, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Background

    On November 14, 2018, Commerce published its affirmative final determination in the less-than-fair-value (LTFV) investigation of large diameter welded pipe from India.[1] The scope of the investigation in Commerce's final determination covered large diameter welded carbon and alloy steel line pipe (welded line pipe), large diameter welded carbon and alloy steel structural pipe (welded structural pipe), and stainless steel large diameter welded pipe (stainless steel pipe) from India.[2] As discussed below, the ITC subsequently found three domestic like products covered by the scope of the investigation (welded line pipe, welded structural pipe, and stainless steel pipe) and accordingly made a separate injury determination with respect to each domestic like product. On January 30, 2019, the ITC notified Commerce of its final determination, pursuant to 735(d) of the Tariff Act of 1930, as amended (the Act), that an industry in the United States is materially injured within the meaning of section 735(b)(1)(A)(i) of the Act, by reason of LTFV imports of welded line pipe from India.[3] Additionally, the ITC made a negligibility determination with respect to welded structural pipe and a negative determination of material injury or threat of material injury with respect to stainless steel pipe.[4] On February 13, 2019, Commerce released draft revised scope language for comment by parties. No party objected to the revised scope language in this proceeding.

    Start Printed Page 8080

    Scope of the Order

    The product covered by this order is welded line pipe from India. For a complete description of the scope of this order, see the Appendix to this notice.

    Antidumping Duty Order

    On January 30, 2019, in accordance with section 735(b)(1)(A)(i) and 735(d) of the Act, the ITC notified Commerce of its final determination in this investigation, in which it found that imports of large diameter welded line pipe are materially injuring a U.S. industry.[5] As a result, and in accordance with section 735(c)(2) and 736 of the Act, we are publishing this antidumping duty order. As noted above, in its determination, the ITC found three domestic like products covered by the scope of the LTFV investigation: Welded line pipe, welded structural pipe, and stainless steel pipe. The ITC made a negative determination with respect to stainless steel pipe from India, and found that imports of welded structural pipe from India are negligible. The ITC made an affirmative determination with respect to welded line pipe imported from India. Because the ITC made distinct and different injury determinations for separate domestic like products, Commerce will instruct U.S. Customs and Border Protection (CBP) to assess antidumping duties on entries of welded line pipe (subject merchandise) from India, and not on entries of welded structural pipe and stainless steel pipe (excluded merchandise) from India.

    Welded Line Pipe

    The Final ITC Report describes welded line pipe as a tubular product produced from carbon and alloy steel, produced to American Petroleum Instiute (API) 5L specifications, and designed for conveying liquids and gases.[6] Because the ITC determined that LTFV imports of welded line pipe from India are materially injuring a U.S. industry,[7] all unliquidated entries of subject merchandise from India, entered or withdrawn from warehouse, are subject to the assessment of antidumping duties, as described below.

    As a result of the ITC Final Determination, in accordance with section 736(a) of the Act, Commerce will direct CBP to assess, upon further instruction by Commerce, antidumping duties for all relevant entries of welded line pipe from India. Antidumping duties will be assessed on unliquidated entries of welded line pipe from India entered, or withdrawn from warehouse, for consumption on or after August 27, 2018, the date of publication of the Preliminary Determination,[8] but will not be assessed on entries occurring after the expiration of the provisional measures period (December 24, 2018), in accordance with section 733(d) of the Act), until the date of publication of the ITC Final Determination in the Federal Register.

    Welded Structural Pipe

    The Final ITC Report describes welded structural pipe as a tubular product produced from carbon and alloy steel, produced to American Society for Testing and Materials (ASTM) specifications, and designed for support in construction projects and piling.[9] Because the ITC found that imports of welded structural pipe from India are negligible, Commerce will direct CBP to terminate the suspension of liquidation for entries of welded structural pipe from India entered, or withdrawn from warehouse, and to refund all cash deposit with respect to these entries pursuant to section 705(c)(2) of the Act.

    Stainless Steel Pipe

    The Final ITC Report describes stainless steel pipe as being produced from stainless steel for its high-chrome chemistry and corrosion-resistant properties.[10] Because the ITC made a negative determination of material injury or threat of material injury by reason of LTFV imports of stainless steel pipe from India,[11] Commerce will direct CBP to terminate the suspension of liquidation for entries of stainless steel pipe from India entered, or withdrawn from warehouse, and to refund all cash deposits with respect to these entries pursuant to section 735(c)(2) of the Act.

    Suspension of Liquidation

    In accordance with section 736 of the Act, Commerce will direct CBP to reinstitute the suspension of liquidation of subject merchandise (i.e., welded line pipe) from India, effective the date of publication of the ITC Final Determination in the Federal Register, and to assess, upon further instruction by Commerce pursuant to section 736(a)(1) of the Act, antidumping duties for each entry of the subject merchandise equal to the amount by which the normal value of the merchandise exceeds the export price (or constructed export price) of the merchandise. We intend to instruct CBP to require, at the same time as importers would normally deposit estimated import duties on this merchandise, cash deposits for each entry of subject merchandise equal to the rates noted below. These instructions suspending liquidation will remain in effect until further notice. For the purpose of determining cash deposit rates, the estimated weighted-average dumping margins for imports of subject merchandise from India have been adjusted, as appropriate, for export subsidies found in the final determination of the companion countervailing duty investigation of this merchandise imported from India. The all-others rate applies to all other producers or exporters not specifically listed.

    Exporter or producerEstimated weighted- average dumping margin (percent)Estimated weighted- average dumping margin adjusted for subsidy offset(s) (percent)
    Bhushan Steel50.5516.85
    Welspun Trading Limited50.5516.85
    All-Others50.5516.85
    Start Printed Page 8081

    Notifications to Interested Parties

    This notice constitutes the antidumping duty order with respect to welded line pipe from India pursuant to section 736(a) of the Act. Interested parties can find a list of antidumping duty orders currently in effect at http://enforcement.trade.gov/​stats/​iastats1.html.

    This order is published in accordance with sections 735(c) and 736(a) of the Act and 19 CFR 351.211(b).

    Start Signature

    Dated: February 28, 2019.

    Gary Taverman,

    Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

    End Signature

    Appendix—Scope of the Order

    The merchandise covered by this order is welded carbon and alloy steel line pipe (other than stainless steel pipe), more than 406.4 mm (16 inches) in nominal outside diameter (large diameter welded line pipe), regardless of wall thickness, length, surface finish, grade, end finish, or stenciling. Large diameter welded pipe may be used to transport oil, gas, slurry, steam, or other fluids, liquids, or gases.

    Large diameter welded line pipe is used to transport oil, gas, or natural gas liquids and is normally produced to the American Petroleum Institute (API) specification 5L. Large diameter welded line pipe can be produced to comparable foreign specifications, grades and/or standards or to proprietary specifications, grades and/or standards, or can be non-graded material. All line pipe meeting the physical description set forth above, including any dual- or multiple-certified/stenciled pipe with an API (or comparable) welded line pipe certification/stencil, is covered by the scope of this order.

    Subject merchandise also includes large diameter welded line pipe that has been further processed in a third country, including but not limited to coating, painting, notching, beveling, cutting, punching, welding, or any other processing that would not otherwise remove the merchandise from the scope of the order if performed in the country of manufacture of the in-scope large diameter welded line pipe.

    Excluded from the scope of this order is structural pipe, which is produced only to American Society for Testing and Materials (ASTM) standards A500, A252, or A53, or other relevant domestic specifications, or comparable foreign specifications, grades and/or standards or to proprietary specifications, grades and/or standards. Also excluded is large diameter welded pipe produced only to specifications of the American Water Works Association (AWWA) for water and sewage pipe.

    The large diameter welded line pipe that is subject to this order is currently classifiable in the Harmonized Tariff Schedule of the United States (HTSUS) under subheadings 7305.11.1030, 7305.11.1060, 7305.11.5000, 7305.12.1030, 7305.12.1060, 7305.12.5000, 7305.19.1030, 7305.19.1060, and 7305.19.5000. Merchandise currently classifiable under subheadings 7305.31.4000, 7305.31.6090, 7305.39.1000 and 7305.39.5000 and that otherwise meets the above scope language is also covered. While the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this order is dispositive.

    End Supplemental Information

    Footnotes

    1.  See Large Diameter Welded Pipe from India: Final Determination of Sales at Less Than Fair Value; 2017, 83 FR 56811 (November 14, 2018).

    Back to Citation

    3.  See ITC Notification Letter to the Deputy Assistant Secretary for Enforcement and Compliance, referencing ITC Investigation Nos. 701-TA-593-594, 731-TA-1402, and 731-TA-1404 (January 30, 2019) (ITC Notification). See also Large Diameter Welded Pipe from China and India; Determinations, 84 FR 1785 (February 5, 2019) (ITC Final Determination) and Large Diameter Welded Pipe from China and India, Investigation Nos. 701-TA-593-594, 731-TA-1402 and 731-TA-1404 (Final), Publication 4859, January 2019 (Final ITC Report).

    Back to Citation

    5.  See ITC Notification; ITC Final Determination, 84 FR 1785.

    Back to Citation

    6.  See Final ITC Report at 11-12.

    Back to Citation

    7.  Id. at 1 and 3.

    Back to Citation

    8.  See Large Diameter Welded Pipe From India: Preliminary Determination of Sales at Less Than Fair Value, 83 FR 43653 (August 27, 2018) (Preliminary Determination).

    Back to Citation

    9.  Id. at 11-12.

    Back to Citation

    10.  Id. at 10.

    Back to Citation

    11.  Id. at 1 and 3.

    Back to Citation

    [FR Doc. 2019-04048 Filed 3-5-19; 8:45 am]

    BILLING CODE 3510-DS-P

Document Information

Published:
03/06/2019
Department:
International Trade Administration
Entry Type:
Notice
Document Number:
2019-04048
Dates:
Applicable March 6, 2019.
Pages:
8079-8081 (3 pages)
Docket Numbers:
A-533-881
PDF File:
2019-04048.Pdf