2011-5125. Certain Cut-to-Length Carbon-Quality Steel Plate From India, Indonesia, Italy, Japan, and the Republic of Korea; Final Results of the Expedited Second Sunset Reviews of the Antidumping Duty Orders

AGENCY:

Import Administration, International Trade Administration, Department of Commerce.

SUMMARY:

On December 1, 2010, the Department of Commerce (the Department) initiated the second sunset reviews of the antidumping duty orders on certain cut-to-length carbon-quality steel plate (CTL Plate) from India, Indonesia, Italy, Japan, and the Republic of Korea, pursuant to section 751(c) of the Tariff Act of 1930, as amended (the Act). The Department has conducted expedited (120-day) sunset reviews for these orders pursuant to 19 CFR 351.218(e)(1)(ii)(C)(2). As a result of these sunset reviews, the Department finds that revocation of the antidumping duty orders would be likely to lead to continuation or recurrence of dumping.

FOR FURTHER INFORMATION CONTACT:

David Goldberger or Gemal Brangman, AD/CVD Operations, Office 2, Import Administration, International Trade Administration, U.S. Department of Commerce, 14th Street and Constitution Avenue, NW., Washington, DC 20230; telephone: [phone] and [phone], respectively.

SUPPLEMENTARY INFORMATION:

Background

On December 1, 2010, the Department published the notice of initiation of the second sunset reviews of the antidumping duty orders on CTL Plate from India, Indonesia, Italy, Japan, and the Republic of Korea, pursuant to section 751(c) of the Act. See Initiation of Five-Year (“Sunset”) Review, 75 FR 74685 (December 1, 2010).

The Department received notices of intent to participate from the following domestic parties within the deadline specified in 19 CFR 351.218(d)(1)(i): ArcelorMittal Steel USA Inc., Evraz Claymont Steel, Evraz Oregon Steel Mills, Nucor Corporation, and SSAB N.A.D (collectively “the domestic interested parties”). These parties claimed interested party status under section 771(9)(C) of the Act and 19 CFR 351.102(b), as domestic manufacturers and producers of the domestic like product.

The Department received complete (collective) substantive responses to the notice of initiation from the domestic interested parties within the 30-day deadline specified in 19 CFR 351.218(d)(3)(i). We received no substantive responses from respondent interested parties with respect to any of the orders covered by these sunset reviews. As a result, pursuant to 19 CFR 351.218(e)(1)(ii)(C)(2), the Department conducted expedited (120-day) sunset reviews of the antidumping duty orders on CTL Plate from India, Indonesia, Italy, Japan, and the Republic of Korea.

Scope of the Orders

The products covered under the CTL Plate antidumping duty orders are certain hot-rolled carbon-quality steel: (1) Universal mill plates (i.e., flat-rolled products rolled on four faces or in a closed box pass, of a width exceeding 150 mm but not exceeding 1250 mm, and of a nominal or actual thickness of not less than 4 mm, which are cut-to-length (not in coils) and without patterns in relief), of iron or non-alloy-quality steel; and (2) flat-rolled products, hot-rolled, of a nominal or actual thickness of 4.75 mm or more and of a width which exceeds 150 mm and measures at least twice the thickness, and which are cut-to-length (not in coils). Steel products to be included in the scope of the orders are of rectangular, square, circular or other shape and of rectangular or non-rectangular cross-section where such non-rectangular cross-section is achieved subsequent to the rolling process (i.e., products which have been “worked after rolling”)—for example, products which have been beveled or rounded at the edges. Steel products that meet the noted physical characteristics that are painted, varnished or coated with plastic or other non-metallic substances are included within the scope. Also, specifically included in the scope of the orders are high strength, low alloy (HSLA) steels. HSLA steels are recognized as steels with micro-alloying levels of elements such as chromium, copper, niobium, titanium, vanadium, and molybdenum.

Steel products to be included in the scope, regardless of Harmonized Tariff Schedule of the United States (HTSUS) definitions, are products in which: (1) Iron predominates, by weight, over each of the other contained elements, (2) the carbon content is two percent or less, by weight, and (3) none of the elements listed below is equal to or exceeds the quantity, by weight, respectively indicated: 1.80 percent of manganese, or 1.50 percent of silicon, or 1.00 percent of copper, or 0.50 percent of aluminum, or 1.25 percent of chromium, or 0.30 percent of cobalt, or 0.40 percent of lead, or 1.25 percent of nickel, or 0.30 percent of tungsten, or 0.10 percent of molybdenum, or 0.10 percent of niobium, or 0.41 percent of titanium, or 0.15 percent of vanadium, or 0.15 percent zirconium. All products that meet the written physical description, and in which the chemistry quantities do not equal or exceed any one of the levels listed above, are within the scope of the orders unless otherwise specifically excluded. The following products are specifically excluded from the orders: (1) Products clad, plated, or coated with metal, whether or not painted, varnished or coated with plastic or other non-metallic substances; (2) SAE grades (formerly AISI grades) of series 2300 and above; (3) products made to ASTM A710 and A736 or their proprietary equivalents; (4) abrasion-resistant steels (i.e., USS AR 400, USS AR 500); (5) products made to ASTM A202, A225, A514 grade S, A517 grade S, or their proprietary equivalents; (6) ball bearing steels; (7) tool steels; and (8) silicon manganese steel or silicon electric steel.

Regarding the scope of the order for Japan, the following additional exclusions apply with respect to abrasion-resistant steels: NK-EH-360 (NK Everhard 360) and NK-EH-500 (NK Everhard 500). NK-EH-360 has the following specifications: (a) Physical Properties: Thickness ranging from 6-50 mm, Brinell Hardness: 361 min.; (b) Heat Treatment: controlled heat treatment; and (c) Chemical Composition (percent weight): C: 0.20 max., Si: 0.55 max., Mn: 1.60 max., P: 0.030 max., S: 0.030 max., Cr: 0.40 max., Ti: 0.005-0.020, B: 0.004 max. NK-EH-500 has the following specifications: (a) Physical Properties: Thickness ranging from 6-50 mm, Brinell Hardness: 477 min.; (b) Heat Treatment: Controlled heat treatment; and (c) Chemical Composition (percent weight): C: 0.35 max., Si: 0.55 max., Mn: 1.60 max., P: 0.030 max., S: 0.030 max., Cr: 0.80 max., Ti: 0.005-0.020, B: 0.004 max.

The merchandise subject to the orders is currently classifiable in the HTSUS under subheadings: 7208.40.3030, 7208.40.3060, 7208.51.0030, 7208.51.0045, 7208.51.0060, 7208.52.0000, 7208.53.0000, 7208.90.0000, 7210.70.3000, 7210.90.9000, 7211.13.0000, 7211.14.0030, 7211.14.0045, 7211.90.0000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7225.40.3050, 7225.40.7000, 7225.50.6000, 7225.99.0090, 7226.91.5000, 7226.91.7000, 7226.91.8000, 7226.99.0000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the merchandise covered by the orders is dispositive.

Analysis of Comments Received

All issues raised in these reviews are addressed in the “Issues and Decision Memorandum for the Expedited Sunset Reviews of the Antidumping Duty Orders on Certain Cut-To-Length Carbon-Quality Steel Plate from India, Indonesia, Italy, Japan, and the Republic of Korea” from Christian Marsh, Deputy Assistant Secretary for Antidumping and Countervailing Duty Operations, to Ronald K. Lorentzen, Deputy Assistant Secretary for Import Administration (Decision Memo), which is hereby adopted by, and issued concurrently with, this notice. The issues discussed in the Decision Memo include the likelihood of continuation or recurrence of dumping and the magnitude of the margins likely to prevail if the orders were revoked. Parties can find a complete discussion of all issues raised in these reviews and the corresponding recommendations in this public memorandum which is on file in the Central Records Unit, room 7046 of the main Department building.

In addition, a complete version of the Decision Memo can be accessed directly on the Web at http://ia.ita.doc.gov/​frn. The paper copy and electronic version of the Decision Memo are identical in content.

Final Results of Reviews

We determine that revocation of the antidumping duty orders on CTL Plate from India, Indonesia, Italy, Japan, and the Republic of Korea would be likely to lead to continuation or recurrence of dumping at the rates listed below:

Exporter/manufacturer	Margin percentage
India:
Steel Authority of India, Ltd	42.39
All Others	42.39
Indonesia:
PT Gunawan Dianjaya/PT Jaya Pari Steel Corporation	50.80
PT Krakatau Steel	52.42
All Others	50.80
Italy:
Palini and Bertoli S.p.A	7.64
All Others	7.64
Japan:
Kawasaki Steel Corporation	9.46
Kobe Steel, Ltd	59.12
Nippon Steel Corporation	59.12
NKK Corporation	59.12
Sumitomo Metal Industries, Ltd	59.12
All Others	9.46
Republic of Korea:
Dongkuk Steel Mill Co., Ltd	2.98
All Others	2.98

This notice also serves as the only reminder to parties subject to administrative protective order (APO) of their responsibility concerning the return or destruction of proprietary information disclosed under APO in accordance with 19 CFR 351.305. Timely notification of the return or destruction of APO materials or conversion to judicial protective orders is hereby requested. Failure to comply with the regulations and terms of an APO is a violation which is subject to sanction.

We are issuing and publishing the results and notice in accordance with sections 751(c), 752(c), and 777(i)(1) of the Act.

Dated: March 1, 2011.

Ronald K. Lorentzen,

Deputy Assistant Secretary for Import Administration.