2024-06840. Certain Metal Lockers and Parts Thereof From the People's Republic of China: Final Results of Antidumping Duty Changed Circumstances Reviews, and Revocation of the Antidumping and Countervailing Duty Orders, in Part

AGENCY:

Enforcement and Compliance, International Trade Administration, Department of Commerce.

SUMMARY:

The U.S. Department of Commerce (Commerce) is issuing the final results of changed circumstances reviews (CCRs) of the antidumping duty (AD) and countervailing duty (CVD) orders on certain metal lockers and parts thereof (metal lockers) from the People's Republic of China (China), to revoke the orders, in part, with respect to certain metal safes.

DATES:

Applicable April 1, 2024.

FOR FURTHER INFORMATION CONTACT:

Matthew Palmer, AD/CVD Operations, Office III, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: [phone].

SUPPLEMENTARY INFORMATION:

Background

On February 21, 2024, Commerce published its initiation and preliminary results in the CCRs on metal lockers from China,^[1] in which Commerce found that changed circumstances warranted revocation of the Orders,^[2] in part, with respect to certain metal safes, with an effective date retroactive to December 1, 2021. We provided interested parties with the opportunity to comment and request a public hearing regarding the Preliminary Results. Commerce did not receive any comments from interested parties.

Scope of the Orders

The scope of the Orders covers certain metal lockers, with or without doors, and parts thereof (metal lockers). The subject certain metal lockers are classified under Harmonized Tariff Schedule of the United States (HTSUS) subheading 9403.20.0078. Parts of subject certain metal lockers are classified under HTSUS subheading 9403.90.8041. In addition, subject certain metal lockers may also enter under HTSUS subheading 9403.20.0050. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of the Orders is dispositive. For a full description of the revised scope of the Orders, see appendix.

Final Results of Changed Circumstances Reviews and Revocation of the Orders, in Part

Commerce did not receive comments, and as a result, continues to determine that domestic locker producers accounting for greater than 85 percent of the domestic industry have expressed support for SA Consumer Products (SA) and Academy, Ltd.'s (doing business as Academy Sports + Outdoors) (Academy), requested CCRs,^[3] which includes support from List Industries and Tennsco LLC, petitioners in the underlying investigation,^[4] as well as other domestic locker producers.^[5] As a result, Commerce finds that changed circumstances warrant revocation of the Orders, in part, with respect to certain metal safes, as described in the revised scope language, and will therefore be excluded from the Orders.^[6] For a full explanation of our analysis please see the Preliminary Results, which is adopted in these final results.^[7]

Application of the Final Results of These Reviews

SA and Academy requested that Commerce apply the final results of these reviews retroactively to December 1, 2021.^[8] Commerce has discretion to determine the applicable date of the determination pursuant to section 751(d)(3) of the Tariff Act of 1930, as amended (the Act), which provides that “{a} determination under this section to revoke an order . . . shall apply with respect to unliquidated entries of the subject merchandise which are entered, or withdrawn from warehouse, for consumption on or after the date determined by the administering authority.” Furthermore, we note that substantially all of the domestic industry, which is in support of the partial revocation, also agrees with applying the partial revocation retroactively to December 1, 2021. Thus, because all parties agree, and Commerce has no administrability concerns with the proposed effective date of the partial revocation being December 1, 2021, the final results of these CCRs are applicable, effective December 1, 2021. For a full explanation of our analysis please see the Preliminary Results.^[9]

Instructions to U.S. Customs and Border Protection (CBP)

Because we determine there are changed circumstances that warrant the revocation of on Orders, in part, we will instruct CBP to liquidate without regard to antidumping and countervailing duties, and to refund any estimated antidumping and countervailing duties on all unliquidated entries of the merchandise covered by this partial revocation, effective December 1, 2021.

Commerce intends to issue instructions to CBP no earlier than 35 days after the date of publication of these final results of CCRs in the Federal Register . If a timely summons is filed at the U.S. Court of International Trade, the instructions will direct CBP not to liquidate relevant entries until the time for parties to file a request for a statutory injunction has expired ( i.e., within 90 days of publication).

Administrative Protective Order

This notice serves as a final reminder to parties subject to an administrative protective order (APO) of their responsibility concerning the disposition of proprietary information disclosed under APO in accordance with 19 CFR 351.305(a)(3). Timely written notification of the return or destruction of APO materials or conversion to judicial protective order is hereby requested. Failure to comply with the regulations and terms of an APO is a sanctionable violation.

Notification to Interested Parties

This notice is published in accordance with sections 751(b)(1) and 777(i) of the Act, 19 CFR 351.216, 19 CFR 351.221(c)(3) and 19 CFR 351.222.

Dated: March 26, 2024.

Abdelali Elouaradia,

Deputy Assistant Secretary For Enforcement and Compliance.

Appendix

Revised Scope of the Orders

The scope of the Orders covers certain metal lockers, with or without doors, and parts thereof (metal lockers). The subject metal lockers are secure metal storage devices less than 27 inches wide and less than 27 inches deep, whether floor standing, installed onto a base or wall-mounted. In a multiple locker assembly (whether a welded locker unit, otherwise assembled locker unit or knocked down unit or kit), the width measurement shall be based on the width of an individual locker not the overall unit dimensions. All measurements in this scope are based on actual measurements taken on the outside dimensions of the single-locker unit. The height is the vertical measurement from the bottom to the top of the unit. The width is the horizontal (side to side) measurement of the front of the unit, and the front of the unit is the face with the door or doors or the opening for internal access of the unit if configured without a door. The depth is the measurement from the front to the back of the unit. The subject certain metal lockers typically include the bodies (back, side, shelf, top and bottom panels), door frames with or without doors which can be integrated into the sides or made separately, and doors.

The subject metal lockers typically are made of flat-rolled metal, metal mesh and/or expanded metal, which includes but is not limited to alloy or non-alloy steel (whether or not galvanized or otherwise metallically coated for corrosion resistance), stainless steel, or aluminum, but the doors may also include transparent polycarbonate, Plexiglas or similar transparent material or any combination thereof. Metal mesh refers to both wire mesh and expanded metal mesh. Wire mesh is a wire product in which the horizontal and transverse wires are welded at the cross-section in a grid pattern. Expanded metal mesh is made by slitting and stretching metal sheets to make a screen of diamond or other shaped openings.

Where the product has doors, the doors are typically configured with or for a handle or other device or other means that permit the use of a mechanical or electronic lock or locking mechanism, including, but not limited to: A combination lock, a padlock, a key lock (including cylinder locks) lever or knob lock, electronic key pad, or other electronic or wireless lock. The handle and locking mechanism, if included, need not be integrated into one another. The subject locker may or may not also enter with the lock or locking device included or installed. The doors or body panels may also include vents (including wire mesh or expanded metal mesh vents) or perforations. The bodies, body components and doors are typically powder coated, otherwise painted or epoxy coated or may be unpainted. The subject merchandise includes metal lockers imported either as welded or otherwise assembled units (ready for installation or use) or as knocked down units or kits (requiring assembly prior to installation or use).

The subject lockers may be shipped as individual or multiple locker units preassembled, welded, or combined into banks or tiers for ease of installation or as sets of component parts, bulk packed ( i.e., all backs in one package, crate, rack, carton or container and sides in another package, crate, rack, carton or container) or any combination thereof. The knocked down lockers are shipped unassembled requiring a supplier, contractor or end-user to assemble the individual lockers and locker banks prior to installation.

The scope also includes all parts and components of lockers made from flat-rolled metal or expanded metal ( e.g., doors, frames, shelves, tops, bottoms, backs, side panels, etc.) as well as accessories that are attached to the lockers when installed (including, but not limited to, slope tops, bases, expansion filler panels, dividers, recess trim, decorative end panels, and end caps) that may be imported together with lockers or other locker components or on their own. The particular accessories listed for illustrative purposes are defined as follows:

a. Slope tops: Slope tops are slanted metal panels or units that fit on the tops of the lockers and that slope from back to front to prevent the accumulation of dust and debris on top of the locker and to discourage the use of the tops of lockers as storage areas. Slope tops come in various configurations including, but not limited to, unit slope tops (in place of flat tops), slope hoods made of a back, top and end pieces which fit over multiple units and convert flat tops to a sloping tops, and slope top kits that convert flat tops to sloping tops and include tops, backs and ends.

b. Bases: Locker bases are panels made from flat-rolled metal that either conceal the legs of the locker unit, or for lockers without legs, provide a toe space in the front of the locker and conceal the flanges for floor anchoring.

c. Expansion filler panel: Expansion filler panels or fillers are metal panels that attach to locker units to cover columns, pipes or other obstacles in a row of lockers or fill in gaps between the locker and the wall. Fillers may also include metal panels that are used on the sides or the top of the lockers to fill gaps.

d. Dividers: Dividers are metal panels that divide the space within a locker unit into different storage areas.

e. Recess trim: Recess trim is a narrow metal trim that bridges the gap between lockers and walls or soffits when lockers are recessed into a wall.

f. Decorative end panels: End panels fit onto the exposed ends of locker units to cover holes, bolts, nuts, screws and other fasteners. They typically are painted to match the lockers.

g. End caps: End caps fit onto the exposed ends of locker units to cover holes, bolts, nuts, screws and other fasteners.

The scope also includes all hardware for assembly and installation of the lockers and locker banks that are imported with or shipped, invoiced, or sold with the imported locker or locker system except the lock.

Excluded from the scope are wire mesh lockers. Wire mesh lockers are those with each of the following characteristics:

(1) At least three sides, including the door, made from wire mesh;

(2) the width and depth each exceed 25 inches; and

(3) the height exceeds 90 inches.

Also excluded are lockers with bodies made entirely of plastic, wood, or any nonmetallic material.

Also excluded are exchange lockers with multiple individual locking doors mounted on one master locking door to access multiple units. Excluded exchange lockers have multiple individual storage spaces, typically arranged in tiers, with access doors for each of the multiple individual storage space mounted on a single frame that can be swung open to allow access to all of the individual storage spaces at once. For example, uniform or garment exchange lockers are designed for the distinct function of securely and hygienically exchanging clean and soiled uniforms. Thus, excluded exchange lockers are a multi-access point locker whereas covered lockers are a single access point locker for personal storage. The excluded exchange lockers include assembled exchange lockers and those that enter in `knock down' form in which all of the parts and components to assemble a completed exchange locker unit are packaged together. Parts for exchange lockers that are imported separately from the exchange lockers in `knock down' form are not excluded.

Also excluded are metal lockers that are imported with an installed electronic, internet-enabled locking device that permits communication or connection between the locker's locking device and other internet connected devices.

Also excluded are locks and hardware and accessories for assembly and installation of the lockers, locker banks and storage systems that are separately imported in bulk and are not incorporated into a locker, locker system or knocked down kit at the time of importation. Such excluded hardware and accessories include but are not limited to locks and bulk imported rivets, nuts, bolts, hinges, door handles, door/frame latching components, and coat hooks. Accessories of sheet metal, including but not limited to end panels, bases, dividers and sloping tops, are not excluded accessories.

Mobile tool chest attachments that meet the physical description above are covered by the scope of the Orders, unless such attachments are covered by the scope of the Orders on certain tool chests and cabinets from China. If the Orders on certain tool chests and cabinets from China are revoked, the mobile tool chest attachments from China will be covered by the scope of the Orders.

The scope also excludes metal safes with each of the following characteristics: (1) Pry resistant, concealed hinges; (2) body walls and doors of steel that are at least 17 gauge (0.05625 inch or 1.42874 mm thick); and (3) an integrated locking mechanism that includes at least two round steel bolts 0.75 inch (19 mm) or larger in diameter; or three bolts 0.70 inch (17.78 mm) or more in diameter; or four or more bolts at least 0.60 inch (15.24 mm) or more in diameter, that project from the door into the body or frame of the safe when in the locked position.

The scope also excludes metal safes with each of the following characteristics:

(1) Pry resistant hinges, whether concealed or external. External hinges must be accompanied by solid steel inactive bolts (minimum 0.75 inch (19 mm) diameter) or plates (minimum 0.177 inch (4.5 mm) thickness), welded or bolted to the door and protrude into the safe and into or behind the door frame by at least 0.39 inches (10 mm) to prevent the physical removal or opening of the door;

(2) body walls and doors made of steel that is at least 17 gauge (0.05625 inch or 1.42874 mm thick);

(3) an integrated locking mechanism that includes one of the following: (a) at least two round steel active bolts 0.75 inch (19 mm) or larger in diameter; (b) three or more steel active bolts 0.70 inch (17.78 mm) or more in diameter; (c) four or more steel active bolts at least 0.60 inch (15.24 mm) or more in diameter; or (d) four or more flat steel locking plates (at least two active and two inactive) of a minimum of 0.177 inch (4.5 mm) in thickness and minimum height of 1.57 inches (40 mm), that extend out from the door by at least 0.78 inches (20 mm). The bolts or plates must project from the door, into the safe, and into or behind the door frame by at least 0.39 inches (10 mm) to prevent the physical removal or opening of the door; and

(4) made of a welded body construction and enter the United States fully assembled.

The scope also excludes gun safes meeting each of the following requirements:

(1) Shall be able to fully contain firearms and provide for their secure storage.

(2) Shall have a locking system consisting of at minimum a mechanical or electronic combination lock. The mechanical or electronic combination lock utilized by the safe shall have at least 10,000 possible combinations consisting of a minimum three numbers, letters, or symbols. The lock shall be protected by a casehardened (Rc 60+) drill-resistant steel plate, or drill-resistant material of equivalent strength.

(3) Boltwork shall consist of a minimum of three steel locking bolts of at least 1/2 inch thickness that intrude from the door of the safe into the body of the safe or from the body of the safe into the door of the safe, which are operated by a separate handle and secured by the lock.

(4) The exterior walls shall be constructed of a minimum 12-gauge thick steel for a single-walled safe, or the sum of the steel walls shall add up to at least 0.100 inches for safes with walls made from two pieces of flat-rolled steel.

(5) Doors shall be constructed of a minimum one layer of 7-gauge steel plate reinforced construction or at least two layers of a minimum 12-gauge steel compound construction.

(6) Door hinges shall be protected to prevent the removal of the door. Protective features include, but are not limited to: Hinges not exposed to the outside, interlocking door designs, dead bars, jeweler's lugs and active or inactive locking bolts.

The scope also excludes gun safes meeting each of the following requirements:

(1) Shall be able to fully contain firearms and provide for their secure storage.

(2) Shall have a locking system consisting of at minimum a mechanical or electronic combination lock with a lock body that is integrated into the door of the safe. The mechanical or electronic combination lock utilized by the safe shall have at least 10,000 possible combinations consisting of a minimum three numbers, letters, or symbols.

(3) Bolt work shall consist of a minimum of three steel locking bolts of at least 1/2 -inch diameter that intrude from the door of the safe into the body of the safe or from the body of the safe into the door of the safe, which are operated by a separate handle and secured by the lock.

(4) The exterior walls (inclusive of the floor and top) shall be constructed of a minimum 14-gauge thick steel and shall be lined with one or more layers of fire-retardant gypsum board bonded, affixed with brackets or otherwise securely attached to the exterior walls. The fire retardant gypsum board shall be at least 15 mm in thickness for a single layer or shall sum to at least 19 mm in thickness where multiple layers are combined together.

(5) Doors shall be constructed of a minimum of one layer of 14-gauge steel lined with a minimum of one layer of 15 mm thick, fire-retardant gypsum board bonded, affixed with brackets or otherwise securely attached to the door. The doors shall fit into jambs equipped with a fire seal fitted completely around the door frame consisting of a hydrated sodium silicate encapsulated in a plastic film or sleeve that, when heat-activated by temperatures of over 210 degrees, expands to cover the space between the jambs and door, providing a barrier to prevent the intrusion of flames, gas, or smoke into the safe.

(6) Door hinges shall be protected to prevent the removal of the door. Protective features include but are not limited to: hinges not exposed to the outside, interlocking door designs, dead bars, jeweler's lugs and active or inactive locking bolts.

(7) The excluded safe must be imported in the fully assembled condition.

The scope also excludes metal storage devices that (1) have two or more exterior exposed drawers regardless of the height of the unit, or (2) are no more than 30 inches tall and have at least one exterior exposed drawer.

Also excluded from the scope are free standing metal cabinets less than 30 inches tall with a single opening, single door and an installed tabletop.

The scope also excludes metal storage devices less than 27 inches wide and deep that: (1) Have two doors hinged on the right and left side of the door frame respectively covering a single opening and that open from the middle toward the outer frame; or (2) are free standing or wall-mounted, single-opening units 20 inches or less high with a single door.

The subject certain metal lockers are classified under Harmonized Tariff Schedule of the United States (HTSUS) subheading 9403.20.0078. Parts of subject certain metal lockers are classified under HTS subheading 9403.90.8041. In addition, subject certain metal lockers may also enter under HTS subheading 9403.20.0050. While HTSUS subheadings are provided for convenience and Customs purposes, the written description of the scope of the Orders is dispositive.

Footnotes

1.   See Certain Metal Lockers and Parts Thereof from the People's Republic of China: Initiation and Preliminary Results of Changed Circumstances Reviews, and Intent to Revoke the Antidumping and Countervailing Duty Orders, In Part,89 FR 14432 (February 27, 2024) ( Preliminary Results).

2.   See Certain Metal Lockers and Parts Thereof from the People's Republic of China: Antidumping and Countervailing Duty Orders,86 FR 46826 (August 20, 2021) ( Orders).

3.   See Petitioners' Letter, “Response to Request for an Expedited Changed Circumstances Review to Amend the Scope of the Orders,” dated January 31, 2024 (Petitioners' Comments) at 2-3 and Attachment 1; see also Petitioners' Letter, “Petitioners' Submission of Amended Domestic Industry Form,” dated February 13, 2024 at 1-2.

4.   See Petitioners' Comments at 1.

5.   Id. at 2-3; see also Petitioners' Letter, “Petitioners' Response to First Supplemental Questionnaire,” dated February 9, 2024, at 3 and Attachment 1.

6.   See Appendix.

7.   See Preliminary Results.

8.   See Petitioners' Comments at 2.

9.   See Preliminary Results.