[Federal Register Volume 63, Number 72 (Wednesday, April 15, 1998)]
[Notices]
[Pages 18490-18491]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-9933]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. NHTSA-98-3717]
Receipt of Petition for Decision that Nonconforming 1990
Volkswagen Transporter Multi-Purpose Passenger Vehicles are Eligible
for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of receipt of petition for decision that nonconforming
1990 Volkswagen Transporter multi-purpose passenger vehicles (MPVs) are
eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt by the National Highway Traffic
Safety Administration (NHTSA) of a petition for a decision that 1990
Volkswagen Transporter MPVs that were not originally manufactured to
comply with all applicable Federal motor vehicle safety standards are
eligible for importation into the United States because (1) they are
substantially similar to vehicles that were originally manufactured for
importation into and sale in the United States and that were certified
by their manufacturer as complying with the safety standards, and (2)
they are capable of being readily altered to conform to the standards.
DATES: The closing date for comments on the petition is May 15, 1998.
ADDRESSES: Comments should refer to the docket number and notice
number, and be submitted to: Docket Management, Room PL-401, 400
Seventh St., SW, Washington, DC 20590. (Docket hours are from 10 am to
5 pm)
FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle
Safety Compliance, NHTSA (202-366-5306).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not
originally manufactured to conform to all applicable Federal motor
vehicle safety standards shall be refused admission into the United
States unless NHTSA has decided that the motor vehicle is substantially
similar to a motor vehicle originally manufactured for importation into
and sale in the United States, certified under 49 U.S.C. 30115, and of
the same model year as the model of the motor vehicle to be compared,
and is capable of being readily altered to conform to all applicable
Federal motor vehicle safety standards.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
Champagne Imports, Inc. of Lansdale, Pennsylvania (``Champagne'')
(Registered Importer 90-009) has petitioned NHTSA to decide whether
1990 Volkswagen Transporter MPVs are eligible for importation into the
United States. The vehicles which Champagne believes are substantially
similar are 1990 Volkswagen Vanagon MPVs that were manufactured for
importation into, and sale in, the United States and certified by their
manufacturer, Volkswagenwerke, A.G., as conforming to all applicable
Federal motor vehicle safety standards.
The petitioner claims that it carefully compared the 1990
Volkswagen Transporter to the 1990 Volkswagen Vanagon, and found the
two vehicles to be substantially similar with respect to
[[Page 18491]]
compliance with most Federal motor vehicle safety standards.
Champagne submitted information with its petition intended to
demonstrate that the 1990 Volkswagen Transporter, as originally
manufactured, conforms to many Federal motor vehicle safety standards
in the same manner as the 1990 Volkswagen Vanagon, or is capable of
being readily altered to conform to those standards.
Specifically, the petitioner claims that the 1990 Volkswagen
Transporter is identical to the 1990 Volkswagen Vanagon with respect to
compliance with Standard Nos. 102 Transmission Shift Lever Sequence . .
. ., 103 Defrosting and Defogging Systems, 104 Windshield Wiping and
Washing Systems, 105 Hydraulic Brake Systems, 106 Brake Hoses, 113 Hood
Latch Systems, 116 Brake Fluid, 119 New Pneumatic Tires for Vehicles
other than Passenger Cars, 124 Accelerator Control Systems, 201
Occupant Protection in Interior Impact, 203 Impact Protection for the
Driver From the Steering Control System, 204 Steering Control Rearward
Displacement, 205 Glazing Materials, 206 Door Locks and Door Retention
Components, 207 Seating Systems, 209 Seat Belt Assemblies, 210 Seat
Belt Assembly Anchorages, 212 Windshield Retention, 219 Windshield Zone
Intrusion, and 302 Flammability of Interior Materials.
Petitioner also contends that the vehicle is capable of being
readily altered to meet the following standards, in the manner
indicated:
Standard No. 101 Controls and Displays: (a) substitution of a lens
marked ``Brake'' for a lens with a noncomplying symbol on the brake
failure indicator lamp; (b) installation of a seat belt warning lamp
that displays the appropriate symbol; (c) recalibration of the
speedometer/odometer from kilometers to miles per hour.
Standard No. 108 Lamps, Reflective Devices and Associated
Equipment: (a) installation of U.S.-model sealed beam headlamp
assemblies; (b) installation of U.S.-model front and rear sidemarker/
reflector assemblies; (c) installation of U.S.-model tail lamp
assemblies.
Standard No. 111 Rearview Mirror: replacement of the passenger side
rearview mirror with a U.S.-model component.
Standard No. 114 Theft Protection: installation of a warning buzzer
microswitch in the steering lock assembly and a warning buzzer.
Standard No. 118 Power Window Systems: rewiring of the power window
system so that the window transport is inoperative when the ignition is
switched off.
Standard No. 120 Tire Selection and Rims for Motor Vehicles other
than Passenger Cars: installation of a tire information placard.
Standard No. 208 Occupant Crash Protection: (a) installation of a
U.S.-model seat belt in the driver's position, or a belt webbing
actuated microswitch inside the driver's seat belt retractor; (b)
installation of an ignition switch actuated seat belt warning lamp and
buzzer. The petitioner states that the vehicle is equipped with
combination lap and shoulder restraints that adjust by means of an
automatic retractor and release by means of a single push button at
both front outboard designated seating positions, and with a lap belt
in the front center designated seating position. The petitioner further
notes that the vehicle is not equipped with a rear seat.
Standard No. 301 Fuel System Integrity: installation of a rollover
valve in the fuel tank vent line between the fuel tank and the
evaporative emissions collection canister.
The petitioner also states that a vehicle identification number
plate must be affixed to the vehicle to meet the requirements of 49 CFR
Part 565.
Interested persons are invited to submit comments on the petition
described above. Comments should refer to the docket number and be
submitted to: Docket Management, Room PL-401, 400 Seventh St., SW,
Washington, DC 20590. It is requested but not required that 10 copies
be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before and after
that date. To the extent possible, comments filed after the closing
date will also be considered. Notice of final action on the petition
will be published in the Federal Register pursuant to the authority
indicated below.
Authority: 49 U.S.C. 30141 (a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued on: April 9, 1998.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 98-9933 Filed 4-14-98; 8:45 am]
BILLING CODE 4910-59-P
