2024-07973. UL LLC: Grant of Expansion of Recognition and Modification to the NRTL Program's List of Appropriate Test Standards

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces the final decision to expand the scope of recognition for UL LLC, as a Nationally Recognized Testing Laboratory (NRTL). Additionally, OSHA announces the final decision to add two test standards to the NRTL Program's List of Appropriate Test Standards.

DATES:

The expansion of the scope of recognition becomes effective on April 16, 2024.

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor; telephone [phone] or email [e-mail].

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor; telephone [phone] or email [e-mail].

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

OSHA hereby gives notice of the expansion of the scope of recognition of UL LLC, (UL) as a NRTL. UL's expansion covers the addition of three test standards to the NRTL scope of recognition.

OSHA recognition of a NRTL signifies that the organization meets the requirements specified in 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within the scope of recognition. Each NRTL's scope of recognition includes (1) the type of products the NRTL may test, with each type specified by the applicable test standard; and (2) the recognized site(s) that has/have the technical capability to perform the product-testing and product-certification activities for test standards within the NRTL's scope. Recognition is not a delegation or grant of government authority; however, recognition enables employers to use products approved by the NRTL to meet OSHA standards that require product testing and certification.

The agency processes applications by NRTLs or applicant organizations for initial recognition, as well as for expansion or renewal of recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides a preliminary finding. In the second notice, the agency provides the final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational web page for each NRTL, including UL, which details that NRTL's scope of recognition. These pages are available from the OSHA website at https://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

UL submitted an application, dated July 26, 2022 (OSHA-2009-0025-0059) to expand the NRTL scope of recognition to include three additional test standards. OSHA staff performed a detailed analysis of the application packet and other pertinent information. OSHA did not perform any on-site reviews in relation to these applications.

OSHA published the preliminary notice announcing UL's expansion application in the Federal Register on February 9, 2024 (89 FR 9179). The agency requested comments by February 26, 2024, but it received no comments in response to this notice.

To obtain or review copies of all public documents pertaining to the UL application, go to http://www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor. Docket No. OSHA-2009-0025 contains all materials in the record concerning UL's recognition. Contact the OSHA Docket Office at [phone] (TTY [phone]) for assistance in locating docket submissions.

II. Final Decision and Order

OSHA staff examined UL's expansion application, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that UL meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitations and conditions listed in this notice. OSHA, therefore, is proceeding with this final notice to grant UL's expanded scope of recognition. OSHA limits the expansion of UL's recognition to testing and certification of products for demonstration of conformance to the test standards listed below in Table 1.

Table 1—Test Standards for Inclusion in UL's NRTL Scope of Recognition

Test standard	Test standard title
UL 6420	Equipment Use for System Isolation and Rated as a Single Unit.
UL 6200 *	Controllers for Use in Power Production.
UL 62091 *	Low-Voltage Switchgear and Controlgear—Controllers for Drivers of Stationary Fire Pump.
* Represents the standards that OSHA will add to the NRTL Program's List of Appropriate Test Standards.

In this notice, OSHA also announces the final decision to add two new test standards to the NRTL Program's List of Appropriate Test Standards. Table 2 below lists the standards that are new to the NRTL Program. OSHA has determined that these test standards are appropriate test standards and will add them to the NRTL Program's List of Appropriate Test Standards.

Table 2—Standards OSHA Will Add to the NRTL Program's List of Appropriate Test Standards

Test standard	Test standard title
UL 6200	Controllers for Use in Power Production.
UL 62091	Low-Voltage Switchgear and Controlgear—Controllers for Drivers of Stationary Fire Pump.

The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 01-00-004, Chapter 2, Section VIII), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

A. Conditions

In addition to those conditions already required by 29 CFR 1910.7, UL must abide by the following conditions of the recognition:

1. UL must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);

2. UL must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and

3. UL must continue to meet the requirements for recognition, including all previously published conditions on UL's scope of recognition, in all areas for which it has recognition.

Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of UL as a NRTL, subject to the limitations and conditions specified above. Additionally, OSHA will add two standards to the NRTL List of Appropriate Test Standards.

III. Authority and Signature

James S. Frederick, Deputy Assistant Secretary of Labor for Occupational Safety and Health, authorized the preparation of this notice. Accordingly, the agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 8-2020 (85 FR 58393, Sept. 18, 2020)), and 29 CFR 1910.7.

Signed at Washington, DC.

James S. Frederick,

Deputy Assistant Secretary of Labor for Occupational Safety and Health.