[Federal Register Volume 63, Number 82 (Wednesday, April 29, 1998)]
[Notices]
[Pages 23616-23620]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-11370]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPTS-51892; FRL-5774-7]
Certain Chemicals; Premanufacture Notices
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture or import a new chemical to
notify EPA and comply with the statutory provisions pertaining to the
manufacture or import of substances not on the TSCA Inventory. Section
5 of TSCA also requires EPA to publish receipt and status information
in the Federal Register each month reporting premanufacture notices
(PMN) and test marketing exemption (TME) application requests received,
both pending and expired. The information in this document contains
notices received from January 20, 1998 to January 23, 1998.
ADDRESSES: Written comments, identified by the document control number
``[OPPTS-51892]'' and the specific PMN number, if appropriate, should
be sent to: Document Control Office (7407), Office of Pollution
Prevention and Toxics, Environmental
[[Page 23617]]
Protection Agency, 401 M St., SW., Rm. ETG-099 Washington, DC 20460.
Comments and data may also be submitted electronically by sending
electronic mail (e-mail) to: oppt.ncic@epamail.epa.gov. Electronic
comments must be submitted as an ASCII file avoiding the use of special
characters and any form of encryption. Comments and data will also be
accepted on disks in WordPerfect in 5.1/6.1 file format or ASCII file
format. All comments and data in electronic form must be identified by
the docket number [OPPTS-51892]. No Confidential Business Information
(CBI) should be submitted through e-mail. Electronic comments on this
notice may be filed online at many Federal Depository Libraries.
Additional information on electronic submissions can be found under
``SUPPLEMENTARY INFORMATION''.
All comments which contain information claimed as CBI must be
clearly marked as such. Three sanitized copies of any comments
containing information claimed as CBI must also be submitted and will
be placed in the public record for this notice. Persons submitting
information on any portion of which they believe is entitled to
treatment as CBI by EPA must assert a business confidentiality claim in
accordance with 40 CFR 2.203(b) for each such portion. This claim must
be made at the time that the information is submitted to EPA. If a
submitter does not assert a confidentiality claim at the time of
submission, EPA will consider this as a waiver of any confidentiality
claim and the information may be made available to the public by EPA
without further notice to the submitter.
FOR FURTHER INFORMATION CONTACT: Susan B. Hazen, Director,
Environmental Assistance Division (7408), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, Rm. E-545, 401
M St., SW., Washington, DC, 20460, (202) 554-1404, TDD (202) 554-0551;
e-mail: TSCA-Hotline@epamail.epa.gov.
SUPPLEMENTARY INFORMATION: Under the provisions of TSCA, EPA is
required to publish notice of receipt and status reports of chemicals
subject to section 5 reporting requirements. The notice requirements
are provided in TSCA sections 5(d)(2) and 5(d)(3). Specifically, EPA is
required to provide notice of receipt of PMNs and TME application
requests received. EPA also is required to identify those chemical
submissions for which data has been received, the uses or intended uses
of such chemicals, and the nature of any test data which may have been
developed. Lastly, EPA is required to provide periodic status reports
of all chemical substances undergoing review and receipt of notices of
commencement.
A record has been established for this notice under docket number
``[OPPTS-51892]'' (including comments and data submitted electronically
as described below). A public version of this record, including
printed, paper versions of electronic comments, which does not include
any information claimed as CBI, is available for inspection from 12
noon to 4 p.m., Monday through Friday, excluding legal holidays. The
public record is located in the TSCA Nonconfidential Information Center
(NCIC), Rm. NEM-B607, 401 M St., SW., Washington, DC 20460.
Electronic comments can be sent directly to EPA at:
oppt.ncic@epamail.epa.gov
Electronic comments must be submitted as an ASCII file avoiding the
use of special characters and any form of encryption.
The official record for this notice, as well as the public version,
as described above will be kept in paper form. Accordingly, EPA will
transfer all comments received electronically into printed, paper form
as they are received and will place the paper copies in the official
record which will also include all comments submitted directly in
writing. The official record is the paper record maintained at the
address in ``ADDRESSES'' at the beginning of this document.
In the past, EPA has published individual notices reflecting the
status of section 5 filings received, pending or expired, as well as
notices reflecting receipt of notices of commencement. In an effort to
become more responsive to the regulated community, the users of this
information and the general public, to comply with the requirements of
TSCA, to conserve EPA resources, and to streamline the process and make
it more timely, EPA is consolidating these separate notices into one
comprehensive notice that will be issued at regular intervals.
In this notice, EPA shall provide a consolidated report in the
Federal Register reflecting the dates PMN requests were received, the
projected notice end date, the manufacturer or importer identity, to
the extent that such information is not claimed as confidential and
chemical identity, either specific or generic depending on whether
chemical identity has been claimed confidential. Additionally, in this
same report, EPA shall provide a listing of receipt of new notices of
commencement.
EPA believes the new format of the notice will be easier to
understand by the interested public, and provides the information that
is of greatest interest to the public users. Certain information
provided in the earlier notices will not be provided under the new
format. The status reports of substances under review, potential
production volume, and summaries of health and safety data will not be
provided in the new notices.
EPA is not providing production volume information in the
consolidated notice since such information is generally claimed as
confidential. For this reason, there is no substantive loss to the
public in not publishing the data. Health and safety data are not
summarized in the notice since it is recognized as impossible, given
the format of this notice, as well as the previous style of notices, to
provide meaningful information on the subject. In those submissions
where health and safety data were received by the Agency, a footnote is
included by the Manufacturer/Importer identity to indicate its
existence. As stated below, interested persons may contact EPA directly
to secure information on such studies.
For persons who are interested in data not included in this notice,
access can be secured at EPA Headquarters in the NCIC at the address
provided above. Additionally, interested parties may telephone the
Document Control Office at (202) 260-1532, TDD (202) 554-0551, for
generic use information, health and safety data not claimed as
confidential or status reports on section 5 filings.
Send all comments to the address listed above. All comments
received will be reviewed and appropriate amendments will be made as
deemed necessary.
This notice will identify: (I) PMNs received; (II) TMEs received;
and (III) Notices of Commencement to manufacture/import.
[[Page 23618]]
I. 59 Premanufacture Notices Received From: 01/20/98 to 01/23/98
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End Manufacturer/
Case No. Received Date Date Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-98-0352 01/20/98 04/20/98 TFI Inc. (G) Softner for (G) Fatty oil, oxidized,
leather sulfited sodium salt
P-98-0353 01/20/98 04/20/98 The C.P. Hall Company (S) Plasticizer; (S) 2-butenedioic acid,
surfactant dicyclohexyl ester
P-98-0354 01/20/98 04/20/98 CBI (G) Open, non- (G) Glycidyl ketime
dispersive use adduct
P-98-0355 01/20/98 04/20/98 CBI (G) Open, non- (G) Ketime adduct
dispersive use
P-98-0357 01/21/98 04/21/98 CBI (G) Open, non (G) Acrylic resin
dispesive use
P-98-0358 01/21/98 04/21/98 CBI (G) Component of (G)
manufactured Naphthalenesulfonamide,
consumer article - N,N-bis [3-[[[3-
contained use (dimethyloctadecylheter
omonocycle)-4-
hydroxyphenyl]sulfonyl]
amino]propyl]-1-hydroxy-
4-[[4-methoxy-2-(4-
morpholinosulfamoyl)phe
nyl]azo]-5-
[(methylsulfonyl)amino]-
P-98-0359 01/21/98 04/21/98 CBI (S) Formulation (G) Alkoxylated acrylate
component for uv monomer
curable inks;
formulation
component for UV
curable coatings
P-98-0360 01/21/98 04/21/98 CBI (G) Industrial metal (G) Salt of amine
coating binder modified bisphenol a-
eposy resin
P-98-0361 01/21/98 04/21/98 CBI (S) Electronic (G) Aromatic acid
photoresist; acrylate half ester
electronic solder
mask; printing
plates; printing
inks
P-98-0362 01/21/98 04/21/98 CBI (G) Component of (G) Organic acid amine
industrial fluid salt
with open use
P-98-0363 01/21/98 04/21/98 CBI (G) Component of (G) Organic acid amine
industrial fluid salt
with open use
P-98-0364 01/21/98 04/21/98 CBI (G) Component of (G) Organic acid amine
industrial fluid salt
with open use
P-98-0365 01/21/98 04/21/98 CBI (G) Component of (G) Organic acid amine
industrial fluid salt
with open use
P-98-0366 01/21/98 04/21/98 CBI (G) Component of (G) Organic acid amine
industrial fluid salt
with open use
P-98-0367 01/21/98 04/21/98 CBI (G) Component of (G) Organic acid amine
industrial fluid salt
with open use
P-98-0368 01/21/98 04/21/98 CBI (S) Corrosive (G) Organic acid amine
additive for salt
machining fluids;
machining fluid
(coolant); synthetic
forming lubricant;
corrosion inhibitor
P-98-0369 01/21/98 04/21/98 CBI (S) Corrosive (G) Organic acid amine
additive for salt
machining fluids;
machining fluid
(coolant); synthetic
forming lubricant;
corrosion inhibitor
P-98-0370 01/21/98 04/21/98 CBI (S) Corrosive (G) Organic acid amine
additive for salt
machining fluids;
machining fluid
(coolant); synthetic
forming lubricant;
corrosion inhibitor
P-98-0371 01/21/98 04/21/98 CBI (S) Corrosive (G) Organic acid amine
additive for salt
machining fluids;
machining fluid
(coolant); synthetic
forming lubricant;
corrosion inhibitor
P-98-0372 01/21/98 04/21/98 CBI (S) Corrosive (G) Organic acid amine
additive for salt
machining fluids;
machining fluid
(coolant); synthetic
forming lubricant;
corrosion inhibitor
P-98-0373 01/21/98 04/21/98 CBI (S) Corrosive (G) Organic acid amine
additive for salt
machining fluids;
machining fluid
(coolant); synthetic
forming lubricant;
corrosion inhibitor
P-98-0374 01/21/98 04/21/98 CBI (G) Component of (G) Quarternary ammonium
coating with open functional acrylic
use polymer
P-98-0375 01/21/98 04/21/98 CBI (G) Component of (G) Quarternary ammonium
coating with open functional acrylic
use polymer
P-98-0376 01/21/98 04/21/98 CBI (G) Component of (G) Quarternary ammonium
coating with open functional acrylic
use polymer
P-98-0377 01/21/98 04/21/98 CBI (G) Component of (G) Quarternary ammonium
coating with open functional acrylic
use polymer
P-98-0378 01/21/98 04/21/98 CBI (G) Component of (G) Quarternary ammonium
coating with open functional acrylic
use polymer
P-98-0379 01/21/98 04/21/98 CBI (G) Component of (G) Quarternary ammonium
coating with open functional acrylic
use polymer
P-98-0380 01/21/98 04/21/98 Allied Signal (S) A monomer for a (G) Dihalogenated
Corporation polymer for biphenyl
electronics industry
[[Page 23619]]
P-98-0381 01/21/98 04/21/98 CBI (S) Coatings; (G) Polycaprolactive
thermoplastic polyol
polyurethanes
P-98-0382 01/21/98 04/21/98 CBI (S) Coatings; (G) Polycaprolactive
thermoplastic polyol
polyurethanes
P-98-0383 01/21/98 04/21/98 CBI (S) Coatings; (G) Polycaprolactive
thermoplastic polyol
polyurethanes
P-98-0384 01/21/98 04/21/98 CBI (S) Coatings; (G) Polycaprolactive
thermoplastic polyol
polyurethanes
P-98-0385 01/23/98 04/23/98 CBI (G) Open non (G) 1703802746
dispersive (coating
material)
P-98-0386 01/23/98 04/23/98 CBI (G) Adhesive (G) Polymer of
component methylenebis[isocyanato
benzene],
benzenedicarboxylic
acid-based polyester,
and mixed polyether
polyols
P-98-0387 01/26/98 04/26/98 Arco Chemical Company (S) Unsaturated (G) Glycerol-propylene
polyester resin oxide polyether triol,
polyester with maleic
anhydride, 1,2-propane
diol and 2-
ethylhexanol.
P-98-0388 01/27/98 04/27/98 CBI (G) Intermediate in (G) Polyester polyol
the manufacture of
the acrylic acid
ester
P-98-0389 01/23/98 04/23/98 CBI (S) Industrial (G) PDI polyester
products: belts, prepolymer
timing belts;
wheels, small
rollers
P-98-0390 01/26/98 04/26/98 3M Company (S) Protective (G) Acrylate resin
treatment for carpet
P-98-0391 01/26/98 04/26/98 CBI (S) Thermoplastic (G) Polyurethane resin
polyurethane coating
material applied to
textiles
P-98-0392 01/26/98 04/26/98 CBI (G) Open, non- (G) Blocked
dispersive polyisocyanate
(crosslinker for
coatings
applications))
P-98-0393 01/26/98 04/26/98 CBI (G) Open, non- (G) Aqueous polyurethane
dispersive (coating dispersion
material)
P-98-0394 01/28/98 04/28/98 CBI (G) Component in (G) Polyurethane
polyurethane prepolymer
adhesive/sealant
P-98-0395 01/28/98 04/28/98 CBI (G) Polyurethane (G) Polyurethane
adhesive component prepolymer
P-98-0396 01/27/98 04/27/98 CBI (G) Chemical for use (S) 2,6,7-trioxabicyclo
in industrial [2.2.2] octane 4-ethyl-
coatings , 1-C5-9-alkyl
derivatives
P-98-0397 01/26/98 04/26/98 3M Company (S) Chemical (G) Acrylate resin
intermediate
P-98-0398 01/27/98 04/27/98 CBI (S) UV absorber for (G) Substituted
polyester fibers benzophenone
P-98-0399 01/27/98 04/27/98 CBI (G) Additive for (G) Benzene sulfonic
polymers fibres acid, dodecyl, ion(1-),
N,N,N-tributyl benzene
methananium
P-98-0400 01/29/98 04/29/98 Dover Chemical (S) Extreme pressure (S) Amines, 12-14-tert-
Corporation lubricant additive alkyl, sulfonates
P-98-0401 01/28/98 04/28/98 CBI (G) Coating with open (G) Non-ionic, hydroxyl-
use rich polyurethane
oligomer
P-98-0402 01/28/98 04/28/98 CBI (G) Coating with open (G) Non-ionic, hydroxyl-
use rich polyurethane
oligomer
P-98-0403 01/28/98 04/28/98 CBI (G) Coating with open (G) Non-ionic, hydroxyl-
use rich polyurethane
oligomer
P-98-0404 01/28/98 04/28/98 CBI (G) Coating with open (G) Non-ionic, hydroxyl-
use rich polyurethane
oligomer
P-98-0405 01/28/98 04/28/98 CBI (G) Coating with open (G) Non-ionic, hydroxyl-
use rich polyurethane
oligomer
P-98-0406 01/28/98 04/28/98 CBI (G) Coating with open (G) Non-ionic, hydroxyl-
use rich polyurethane
oligomer
P-98-0407 01/30/98 04/30/98 CBI (S) Marker or tracer (G) Substituted bis
for petroleum fuels (phenyl)
and lubes isobenzofuranone
P-98-0408 01/29/98 04/29/98 Eastman Chemical (G) Ink and paint (G) Substituted styrene-
Company vehicle, acrylate polymer
intermediate
P-98-0409 01/30/98 04/30/98 CBI (S) Curing agent in (G) Cross linking
baked finishes stoving polyurethane
resin
P-98-0410 01/29/98 04/29/98 CBI (G) Plastic additive (G) Halogenated bisimide
P-98-0411 01/30/98 04/30/98 CBI (G) Paint (G) Polyester polyol
--------------------------------------------------------------------------------------------------------------------------------------------------------
[[Page 23620]]
II. 1 Test Marketing Exemption Notice Received From: 01/20/98 to 01/23/98
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End Manufacturer/
Case No. Received Date Date Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
T-98-0001 11/28/97 01/12/98 CBI (G) Alternative (G) Hydrofluorocarbon
fluorocarbon for
open, non-dispersive
and contained uses
--------------------------------------------------------------------------------------------------------------------------------------------------------
III. 15 Notices of Commencement Received From: 01/20/98 to 01/23/98
----------------------------------------------------------------------------------------------------------------
Commencement/Import
Case No. Received Date Date Chemical
----------------------------------------------------------------------------------------------------------------
P-97-0567 09/23/97 08/01/97 (G) Aluminium salicylate
P-92-0845 01/26/98 01/08/98 (G) Fatty acids, C5-9,
straight chain and branched,
esters with pentaerythritol
P-95-1322 01/20/98 01/08/98 (G) Substituted phthalocyanine
P-95-2078 01/26/98 01/09/98 (S) 1,4-butanediamine,
catch,N,N,N-terakis (3-
aminopropyl)
P-96-0325 01/20/98 12/31/97 (G) Magnesium alkylbenzene
sulfonates
P-97-0051 01/22/98 01/09/98 (G) Substituted aromatic
ketone
P-97-0688 01/23/98 12/21/97 (G) Chromophore substituted
polyoxyalkylene tint
P-97-0887 01/23/98 01/08/98 (G) Dipentaerythritol, mixed
ester with fatty acids, 5-9,
straight and branched
P-97-1026 01/21/98 01/06/98 (G) Polyacrylic derivative
P-97-1043 01/21/98 01/10/98 (G) 2H-1-benzopyran-2-one, 3,4-
dihydro-6-hydroxy-polymethyl-
P-97-1046 01/22/98 01/15/98 (G) Substituted s-
phenylthiazole
P-97-0868 01/29/98 01/13/98 (S) Cyclopropanecarboxylic
acid, 3-hexenyl ester, (z)
P-97-1068 01/30/98 01/20/98 (G) Vinyl alkyl polyester
copolymer
P-97-1069 01/30/98 01/20/98 (G) Alkyl polyester polymer
P-97-1100 01/28/98 01/21/98 (G) Polyacrylic resin
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Premanufacture notices.
Dated: April 19, 1998.
Oscar Morales,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 98-11370 Filed 4-28-98; 8:45 am]
BILLING CODE 6560-50-F
