[Federal Register Volume 63, Number 82 (Wednesday, April 29, 1998)]
[Notices]
[Pages 23444-23447]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-11409]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPTS-51894; FRL-5785-8]
Certain Chemicals; Premanufacture Notices
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture or import a new chemical to
notify EPA and comply with the statutory provisions pertaining to the
manufacture or import of substances not on the TSCA Inventory. Section
5 of TSCA also requires EPA to publish receipt and status information
in the Federal Register each month reporting premanufacture notices
(PMN) and test marketing exemption (TME) application requests received,
both pending and expired. The information in this document contains
notices received from February 1, 1998 to February 6, 1998.
ADDRESSES: Written comments, identified by the document control number
``[OPPTS-51894]'' and the specific PMN number, if appropriate, should
be sent to: Document Control Office (7407), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 401 M St., SW.,
Rm. ETG-099 Washington, DC 20460.
Comments and data may also be submitted electronically by sending
electronic mail (e-mail) to: oppt.ncic@epamail.epa.gov. Electronic
comments must be submitted as an ASCII file avoiding the use of special
characters and any form of encryption. Comments and data will also be
accepted on disks in WordPerfect in 5.1/6.1 file format or ASCII file
format. All comments and data in electronic form must be identified by
the docket number [OPPTS-51894]. No Confidential Business Information
(CBI) should be submitted through e-mail. Electronic comments on this
notice may be filed online at many Federal Depository Libraries.
Additional information on electronic submissions can be found under
``SUPPLEMENTARY INFORMATION''.
All comments which contain information claimed as CBI must be
clearly marked as such. Three sanitized copies of any comments
containing information claimed as CBI must also be submitted and will
be placed in the public record for this notice. Persons submitting
information on any portion of which they believe is entitled to
treatment as CBI by EPA must assert a business confidentiality claim in
accordance with 40 CFR 2.203(b) for each such portion. This claim must
be made at the time that the information is submitted to EPA. If a
submitter does not assert a confidentiality claim at the time of
submission, EPA will consider this as a waiver of any confidentiality
claim and the information may be made available to the public by EPA
without further notice to the submitter.
FOR FURTHER INFORMATION CONTACT: Susan B. Hazen, Director,
Environmental Assistance Division (7408), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, Rm. E-545, 401
M St., SW., Washington, DC, 20460, (202) 554-1404, TDD (202) 554-0551;
e-mail: TSCA-Hotline@epamail.epa.gov.
SUPPLEMENTARY INFORMATION: Under the provisions of TSCA, EPA is
required to publish notice of receipt and status reports of chemicals
subject to section 5 reporting requirements. The notice requirements
are provided in TSCA sections 5(d)(2) and 5(d)(3). Specifically, EPA is
required to provide notice of receipt of PMNs and TME application
requests received. EPA also is required to identify those chemical
submissions for which data has been received, the uses or intended uses
of such chemicals, and the nature of any test data which may have been
developed. Lastly, EPA is required to provide periodic status reports
of all chemical substances undergoing review and receipt of notices of
commencement.
A record has been established for this notice under docket number
``[OPPTS-51894]'' (including comments and data submitted electronically
as described
[[Page 23445]]
below). A public version of this record, including printed, paper
versions of electronic comments, which does not include any information
claimed as CBI, is available for inspection from 12 noon to 4 p.m.,
Monday through Friday, excluding legal holidays. The public record is
located in the TSCA Nonconfidential Information Center (NCIC), Rm. NEM-
B607, 401 M St., SW., Washington, DC 20460.
Electronic comments can be sent directly to EPA at:
oppt.ncic@epamail.epa.gov
Electronic comments must be submitted as an ASCII file avoiding the
use of special characters and any form of encryption.
The official record for this notice, as well as the public version,
as described above will be kept in paper form. Accordingly, EPA will
transfer all comments received electronically into printed, paper form
as they are received and will place the paper copies in the official
record which will also include all comments submitted directly in
writing. The official record is the paper record maintained at the
address in ``ADDRESSES'' at the beginning of this document.
In the past, EPA has published individual notices reflecting the
status of section 5 filings received, pending or expired, as well as
notices reflecting receipt of notices of commencement. In an effort to
become more responsive to the regulated community, the users of this
information and the general public, to comply with the requirements of
TSCA, to conserve EPA resources, and to streamline the process and make
it more timely, EPA is consolidating these separate notices into one
comprehensive notice that will be issued at regular intervals.
In this notice, EPA shall provide a consolidated report in the
Federal Register reflecting the dates PMN requests were received, the
projected notice end date, the manufacturer or importer identity, to
the extent that such information is not claimed as confidential and
chemical identity, either specific or generic depending on whether
chemical identity has been claimed confidential. Additionally, in this
same report, EPA shall provide a listing of receipt of new notices of
commencement.
EPA believes the new format of the notice will be easier to
understand by the interested public, and provides the information that
is of greatest interest to the public users. Certain information
provided in the earlier notices will not be provided under the new
format. The status reports of substances under review, potential
production volume, and summaries of health and safety data will not be
provided in the new notices.
EPA is not providing production volume information in the
consolidated notice since such information is generally claimed as
confidential. For this reason, there is no substantive loss to the
public in not publishing the data. Health and safety data are not
summarized in the notice since it is recognized as impossible, given
the format of this notice, as well as the previous style of notices, to
provide meaningful information on the subject. In those submissions
where health and safety data were received by the Agency, a footnote is
included by the Manufacturer/Importer identity to indicate its
existence. As stated below, interested persons may contact EPA directly
to secure information on such studies.
For persons who are interested in data not included in this notice,
access can be secured at EPA Headquarters in the NCIC at the address
provided above. Additionally, interested parties may telephone the
Document Control Office at (202) 260-1532, TDD (202) 554-0551, for
generic use information, health and safety data not claimed as
confidential or status reports on section 5 filings.
Send all comments to the address listed above. All comments
received will be reviewed and appropriate amendments will be made as
deemed necessary.
This notice will identify: (I) PMNs received; and (II) Notices of
Commencement to manufacture/import.
I. 48 Premanufacture Notices Received From: 02/01/98 to 02/06/98
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End Manufacturer/
Case No. Received Date Date Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-98-0412 02/02/98 05/03/98 CBI (G) Component of (G) Intermediate salt
coating with open for grind vehicle
use synthesis for use in
electrodepositable
primer
P-98-0413 02/02/98 05/03/98 CBI (G) Component of (G) Intermediate salt
coating with open for grind vehicle
use synthesis for use in
electrodepositable
primer
P-98-0414 02/02/98 05/03/98 CBI (G) Component of (G) Intermediate salt
coating with open for grind vehicle
use synthesis for use in
electrodepositable
primer
P-98-0415 02/02/98 05/03/98 CBI (G) Component of (G) Intermediate salt
coating with open for grind vehicle
use synthesis for use in
electrodepositable
primer
P-98-0416 02/02/98 05/03/98 CBI (G) Component of (G) Intermediate salt
coating with open for grind vehicle
use synthesis for use in
electrodepositable
primer
P-98-0417 02/02/98 05/03/98 CBI (G) Component of (G) Intermediate salt
coating with open for grind vehicle
use synthesis for use in
electrodepositable
primer
P-98-0418 02/02/98 05/03/98 CBI (G) Coomponent of (G) Intermediate salt
coating with open for grind vehicle
use synethesis for use in
electrodepositable
primer
P-98-0419 02/02/98 05/03/98 CBI (G) Coomponent of (G) Intermediate salt
coating with open for grind vehicle
use synethesis for use in
electrodepositable
primer
P-98-0420 02/02/98 05/03/98 CBI (G) Coomponent of (G) Intermediate salt
coating with open for grind vehicle
use synethesis for use in
electrodepositable
primer
P-98-0421 02/02/98 05/03/98 CBI (G) Coomponent of (G) Intermediate salt
coating with open for grind vehicle
use synethesis for use in
electrodepositable
primer
P-98-0422 02/02/98 05/03/98 CBI (G) Coomponent of (G) Intermediate salt
coating with open for grind vehicle
use synethesis for use in
electrodepositable
primer
[[Page 23446]]
P-98-0423 02/02/98 05/03/98 CBI (G) Coomponent of (G) Intermediate salt
coating with open for grind vehicle
use synethesis for use in
electrodepositable
primer
P-98-0424 02/02/98 05/03/98 CBI (G) Coating with open (G) Grind vehicle for
use electrodepositable
primer
P-98-0425 02/02/98 05/03/98 CBI (G) Coating with open (G) Grind vehicle for
use electrodepositable
primer
P-98-0426 02/02/98 05/03/98 CBI (G) Coating with open (G) Grind vehicle for
use electrodepositable
primer
P-98-0427 02/02/98 05/03/98 CBI (G) Coating with open (G) Grind vehicle for
use electrodepositable
primer
P-98-0428 02/02/98 05/03/98 CBI (G) Coating with open (G) Grind vehicle for
use electrodepositable
primer
P-98-0429 02/02/98 05/03/98 CBI (G) Coating with open (G) Grind vehicle for
use electrodepositable
primer
P-98-0430 02/02/98 05/03/98 CBI (G) Component of (G) Grind vehicle for
coating with open electrodepositable
use primer
P-98-0431 02/02/98 05/03/98 CBI (G) Component of (G) Grind vehicle for
coating with open electrodepositable
use primer
P-98-0432 02/02/98 05/03/98 CBI (G) Component of (G) Grind vehicle for
coating with open electrodepositable
use primer
P-98-0433 02/02/98 05/03/98 CBI (G) Component of (G) Grind vehicle for
coating with open electrodepositable
use primer
P-98-0434 02/02/98 05/03/98 CBI (G) Component of (G) Grind vehicle for
coating with open electrodepositable
use primer
P-98-0435 02/02/98 05/03/98 CBI (G) Component of (G) Grind vehicle for
coating with open electrodepositable
use primer
P-98-0436 02/02/98 05/03/98 CBI (S) Component of an (S) Propanoic acid, 3-
industrial coating hydroxy-2-
for metal (hydroxymethyl)-2-
methyl-, polymer with
(chloromethyl)oxirane
polymer with 4,4 - (1-
methylethylidene)bis[cy
clohexanol] 2-
propenoate, hexahydro-
1,3-isobenzofurandione
polymer with 2,2-
[oxybis(methylene)bis[2-
ethyl-1,3-propanediol]
ester with alpha-methyl-
omega-hydroxypoly (oxy-
1,2-ethanediyl) and 1,1-
methylenebis [4-
isocyanatocyclohexane],
4-hydroxybutyl acrylate-
blocked, compounds with
2-(dimethylamino)
ethanol
P-98-0437 02/02/98 05/03/98 DSM Fine Chemicals, (S) Agrochemical (S) Propanoic acid, 2-
Inc. intermediate; oxo-, methyl ester
pharmaceutical
intermediate;
specialty chemical
intermediate
P-98-0438 02/03/98 05/04/98 CBI (G) Component of (G) Benzenebutanoic
manufactured acid, y-oxo-, 2-
consumer article - [[(tetrahydrodioxo-4-
contained use heteromonocycle)methyl]
thio]ethyl ester
P-98-0439 02/03/98 05/04/98 Polyurethane and (G) Simeconductor and (G) Poly(arylene ether)
Performance microelectronic
Chemicals Division dielectrics
Air Products and
Chemicals
Incorporated
P-98-0440 02/02/98 05/03/98 CBI (G) Colorant for (G) Polymeric colorants
plastics
P-98-0441 02/02/98 05/03/98 CBI (G) Colorant for (G) Polymeric colorants
plastics
P-98-0442 02/02/98 05/03/98 CBI (G) Component of (G) Quaternary ammonium
coating with open functional acrylic
use polymer
P-98-0443 02/02/98 05/03/98 CBI (G) Component of (G) Quaternary ammonium
coating with open functional acrylic
use polymer
P-98-0444 02/02/98 05/03/98 CBI (G) Component of (G) Quaternary ammonium
coating with open functional acrylic
use polymer
P-98-0445 02/02/98 05/03/98 CBI (G) Component of (G) Quaternary ammonium
coating with open functional acrylic
use polymer
P-98-0446 02/02/98 05/03/98 CBI (G) Component of (G) Quaternary ammonium
coating with open functional acrylic
use polymer
P-98-0447 02/02/98 05/03/98 CBI (G) Component of (G) Quaternary ammonium
coating with open functional acrylic
use polymer
[[Page 23447]]
P-98-0448 02/04/98 05/05/98 Akzo nobel resins (S) Resin used to (S) 2-propenoic acid, 2-
manufacture; methyl-, polymer with
industrial coatings butyl 2-methyl-2-
propenoate, butyl 2-
propenoate,
ethenylbenzene and 2-
hydroxyethyl 2-
propenoate, tert-bu
peroxide-initiated
P-98-0449 02/03/98 05/04/98 CBI (G) Open non (G) Blocked hydrophilic
dispersive (coating aliphatic
material) polyisocyanate
P-98-0450 02/04/98 05/05/98 CBI (G) Component of (G) Methane derivative -
manufactured [3,5-bis(1,1-
consumer article - dimethylethyl)-4-
contained use hydroxyphenyl]-
P-98-0451 02/05/98 05/06/98 CBI (G) Ink component (G) Thermosetting
polyester
P-98-0452 02/05/98 05/06/98 CBI (S) High solids (G) Mixed glycol
baking enamel polyester resin
crosslinked with
melamines
P-98-0453 02/04/98 05/05/98 CBI (S) A thickener in (G) Mixed dicarboxylic
specialty greases acid, barium salt
P-98-0454 02/04/98 05/05/98 Ciba Specialty (G) Open, non- (G) Heterocyclic amine
Chemicals dispersive use and others
Corporation USA
P-98-0455 02/06/98 05/07/98 CBI (S) Polymer for (G) Silylated polyether
sealant prepolymer
manufacturing
P-98-0456 02/06/98 05/07/98 CBI (S) Polymer for (G) Silylated polyether
sealant prepolymer
manufacturing
P-98-0457 02/06/98 05/07/98 CBI (S) Polymer for (G) Silylated polyether
sealant prepolymer
manufacturing
P-98-0458 02/05/98 05/06/98 CBI (S) Resin for (G) Hydrocarbon modified
printing ink rosin resin
P-98-0460 02/06/98 05/07/98 Twilight Color & (S) An acid dye for (G) 2,7-
Chemical Company, leather naphtalenedisulfonic
Inc acid, 4-amino-3-
[[[[[[(2,4-
disubstituted phenyl)
azo] phenyl] amino]
sulfonyl] phenyl] azo] -
5-hydroxy-6-
[(substituted phenyl)
azo]-, alkaline salt
--------------------------------------------------------------------------------------------------------------------------------------------------------
II. 12 Notices of Commencement Received From: 02/01/98 to 02/06/98
----------------------------------------------------------------------------------------------------------------
Commencement/Import
Case No. Received Date Date Chemical
----------------------------------------------------------------------------------------------------------------
P-97-0090 02/02/98 01/05/98 (G) Substituted diphenyl
triazine
P-97-0096 02/02/98 01/05/98 (G) Substituted phenyl
triazine
P-97-0129 02/02/98 01/05/98 (S) 1,3-Benzenedicarboxylic
acid, polymer with 1,6-
hexanediamine and hexanedioic
acid
P-97-0338 02/05/98 01/22/98 (G) Polycarbodiimide
P-97-0586 02/05/98 01/19/98 (G) Polyurethane adhesive
P-97-0626 02/05/98 01/17/98 (G) Polyurethane polymer
P-97-1019 02/02/98 12/31/97 (G) Acrylic acid copolymer
P-97-1084 02/02/98 01/20/98 (G) Alkoxylated acrylic acid
polyester
P-97-1085 02/02/98 01/20/98 (G) Alkoxylate polyether
P-97-1090 02/06/98 01/23/98 (G) Acetylenic-oxy-
substituted, saturated pyran
P-98-0001 02/02/98 01/07/98 (G) Alkarylsulfonic acids,
alkylamine salt
P-98-0042 02/02/98 01/28/98 (G) Aromatic polyester polyol
----------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Premanufacture notices.
Dated: April 20, 1998.
Oscar Morales,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 98-11409 Filed 4-28-98; 8:45 am]
BILLING CODE 6560-50-F
