[Federal Register Volume 63, Number 82 (Wednesday, April 29, 1998)]
[Notices]
[Pages 23460-23462]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-11415]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPTS-51901; FRL-5786-6]
Certain Chemicals; Premanufacture Notices
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5 of the Toxic Substances Control Act (TSCA) requires
any person who intends to manufacture or import a new chemical to
notify EPA and comply with the statutory provisions pertaining to the
manufacture or import of substances not on the TSCA Inventory. Section
5 of TSCA also requires EPA to publish receipt and status information
in the Federal Register each month reporting premanufacture notices
(PMN) and test marketing exemption (TME) application requests received,
both pending and expired. The information in this document contains
notices received from March 23, 1998 to March 27, 1998.
ADDRESSES: Written comments, identified by the document control number
``[OPPTS-51901]'' and the specific PMN number, if appropriate, should
be sent to: Document Control Office (7407), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, 401 M St., SW.,
Rm. ETG-099 Washington, DC 20460.
Comments and data may also be submitted electronically by sending
electronic mail (e-mail) to: oppt.ncic@epamail.epa.gov. Electronic
comments must be submitted as an ASCII file avoiding the use of special
characters and any form of encryption. Comments and data will also be
accepted on disks in WordPerfect in 5.1/6.1 file format or ASCII file
format. All comments and data in electronic form must be identified by
the docket number [OPPTS-51901]. No Confidential Business Information
(CBI) should be submitted through e-mail. Electronic comments on this
notice may be filed online at many Federal Depository Libraries.
Additional information on electronic submissions can be found under
``SUPPLEMENTARY INFORMATION''.
All comments which contain information claimed as CBI must be
clearly marked as such. Three sanitized copies of any comments
containing information claimed as CBI must also be submitted and will
be placed in the public record for this notice. Persons submitting
information on any portion of which they believe is entitled to
treatment as CBI by EPA must assert a business confidentiality claim in
accordance with 40 CFR 2.203(b) for each such portion. This claim must
be made at the time that the information is submitted to EPA. If a
submitter does not assert a confidentiality claim at the time of
submission, EPA will consider this as a waiver of any confidentiality
claim and the information may be made available to the public by EPA
without further notice to the submitter.
FOR FURTHER INFORMATION CONTACT: Susan B. Hazen, Director,
Environmental Assistance Division (7408), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, Rm. E-545, 401
M St., SW., Washington, DC, 20460, (202) 554-1404, TDD (202) 554-0551;
e-mail: TSCA-Hotline@epamail.epa.gov.
SUPPLEMENTARY INFORMATION: Under the provisions of TSCA, EPA is
required to publish notice of receipt and status reports of chemicals
subject to section 5 reporting requirements. The notice requirements
are provided in TSCA sections 5(d)(2) and 5(d)(3). Specifically, EPA is
required to provide notice of receipt of PMNs and TME application
requests received. EPA also is required to identify those chemical
submissions for which data has been received, the uses or intended uses
of such chemicals, and the nature of any test data which may have been
developed. Lastly, EPA is required to provide periodic status reports
of all chemical substances undergoing review and receipt of notices of
commencement.
A record has been established for this notice under docket number
``[OPPTS-51901]'' (including comments and data submitted electronically
as described below). A public version of this record,
[[Page 23461]]
including printed, paper versions of electronic comments, which does
not include any information claimed as CBI, is available for inspection
from 12 noon to 4 p.m., Monday through Friday, excluding legal
holidays. The public record is located in the TSCA Nonconfidential
Information Center (NCIC), Rm. NEM-B607, 401 M St., SW., Washington, DC
20460.
Electronic comments can be sent directly to EPA at:
oppt.ncic@epamail.epa.gov
Electronic comments must be submitted as an ASCII file avoiding the
use of special characters and any form of encryption.
The official record for this notice, as well as the public version,
as described above will be kept in paper form. Accordingly, EPA will
transfer all comments received electronically into printed, paper form
as they are received and will place the paper copies in the official
record which will also include all comments submitted directly in
writing. The official record is the paper record maintained at the
address in ``ADDRESSES'' at the beginning of this document.
In the past, EPA has published individual notices reflecting the
status of section 5 filings received, pending or expired, as well as
notices reflecting receipt of notices of commencement. In an effort to
become more responsive to the regulated community, the users of this
information and the general public, to comply with the requirements of
TSCA, to conserve EPA resources, and to streamline the process and make
it more timely, EPA is consolidating these separate notices into one
comprehensive notice that will be issued at regular intervals.
In this notice, EPA shall provide a consolidated report in the
Federal Register reflecting the dates PMN requests were received, the
projected notice end date, the manufacturer or importer identity, to
the extent that such information is not claimed as confidential and
chemical identity, either specific or generic depending on whether
chemical identity has been claimed confidential. Additionally, in this
same report, EPA shall provide a listing of receipt of new notices of
commencement.
EPA believes the new format of the notice will be easier to
understand by the interested public, and provides the information that
is of greatest interest to the public users. Certain information
provided in the earlier notices will not be provided under the new
format. The status reports of substances under review, potential
production volume, and summaries of health and safety data will not be
provided in the new notices.
EPA is not providing production volume information in the
consolidated notice since such information is generally claimed as
confidential. For this reason, there is no substantive loss to the
public in not publishing the data. Health and safety data are not
summarized in the notice since it is recognized as impossible, given
the format of this notice, as well as the previous style of notices, to
provide meaningful information on the subject. In those submissions
where health and safety data were received by the Agency, a footnote is
included by the Manufacturer/Importer identity to indicate its
existence. As stated below, interested persons may contact EPA directly
to secure information on such studies.
For persons who are interested in data not included in this notice,
access can be secured at EPA Headquarters in the NCIC at the address
provided above. Additionally, interested parties may telephone the
Document Control Office at (202) 260-1532, TDD (202) 554-0551, for
generic use information, health and safety data not claimed as
confidential or status reports on section 5 filings.
Send all comments to the address listed above. All comments
received will be reviewed and appropriate amendments will be made as
deemed necessary.
This notice will identify: PMNs received.
31 Premanufacture Notices Received From: 03/23/98 to 03/27/98
--------------------------------------------------------------------------------------------------------------------------------------------------------
Projected Notice End Manufacturer/
Case No. Received Date Date Importer Use Chemical
--------------------------------------------------------------------------------------------------------------------------------------------------------
P-98-0607 03/24/98 06/22/98 CBI (G) Coatings binder (G) Urethane oligomer
component
P-98-0608 03/23/98 06/21/98 Strem Chemicals, Inc. (S) Chemical (G) Derivative
intermediate for the tetrasubstituted alkane
production of
product described in
PMN TS-int 506
P-98-0609 03/23/98 06/21/98 Strem Chemicals, Inc. (S) Chemical (G) Tetrasubstituted
intermediate for the alkane
production of
product described in
pmn TS-int 222
P-98-0610 03/23/98 06/21/98 Creanova Inc. (G) Coatings (S) Propanedioic acid,
component bis(1-methylethyl)
ester*
P-98-0611 03/23/98 06/21/98 Strem Chemicals, Inc. (S) Chemical (G) Derivatized
intermediate for the tetrasubstituted alkane
production of
product described in
PMN TSs-PRD380
P-98-0612 03/23/98 06/21/98 CBI (G) Coatings binder (G) Urethane oligomer
component
P-98-0613 03/23/98 06/21/98 U.S.Polymers Inc. (S) This resin is (G) Reaction product of-
used in two methyl methacrylate, N-
component isocyanate butyl methacrylate,
crosslinked urethane hydroxy functional
coatings methacrylate, aliphatic
methacrylates and
methacrylate acid
P-98-0614 03/23/98 06/21/98 Olin Corporation (S) Film-forming (G) Polyamic acid, ethyl
polymer ester, acrylate ester
P-98-0615 03/26/98 06/24/98 CBI (G) Chemical (G) Polyoxyalkylated
intermediate alcolhol
P-98-0616 03/26/98 06/24/98 CBI (G) Open, non- (G) Polyester resin
dispersive use
P-98-0617 03/23/98 06/21/98 Gateway Additive (S) Metalworking (S) Hexanedioic acid,
Company. fluids, water polymer with 2,2-
extendable, cutting bis(hydroxymethyl)-1,3-
oils, lubricants propanediol,
isooctadecanoate
P-98-0618 03/23/98 06/21/98 CBI (G) Molding compounds (G) Poly(ester-ether)
P-98-0619 03/24/98 06/22/98 CBI (G) Open, non- (G) Acrylic polymer
dispersive
P-98-0620 03/24/98 06/22/98 CBI (G) Open, non- (G) Acrylic polymer
dispersive
P-98-0621 03/27/98 06/18/98 CBI (G) Developer (G) Derivative bisphenol
sulfone
[[Page 23462]]
P-98-0622 03/23/98 06/21/98 Strem Chemicals, Inc. (S) Chemical (G) Derivatized
intermediate for the tetrasubstituted alkane
production of
product described in
PMN TS-254
P-98-0623 03/23/98 06/21/98 Strem Chemicals, Inc. (S) Chemical (G) Derivatized
intermediate for the tetrasubstituted alkane
production of
product described in
PMN TS-254
P-98-0624 03/23/98 06/21/98 Strem Chemicals, Inc. (S) Chemical (G) Derivatized
intermediate for the tetrasubstituted alkane
production of
product described in
PMN TS-254
P-98-0625 03/23/98 06/21/98 Strem Chemicals, Inc. (G) Commercial r&d (G) Metal derivatized
tetrasubstituted alkane
compound
P-98-0626 03/23/98 06/21/98 Strem Chemicals, Inc. (G) Commercial r&d (G) Metal derivatized
tetrasubstituted alkane
compound
P-98-0627 03/23/98 06/21/98 Strem Chemicals, Inc. (G) Commercial r&d (G) Metal derivatized
tetrasubstituted alkane
compound
P-98-0628 03/23/98 06/21/98 Strem Chemicals, Inc. (G) Commercial r&d (G) Metal derivatized
tetrasubstituted alkane
compound
P-98-0629 03/23/98 06/21/98 Strem Chemicals, Inc. (G) Commercial r&d (G) Metal derivatized
tetrasubstituted alkane
compound
P-98-0630 03/23/98 06/21/98 W.R. Grace & Company- (G) Material (G) Grace
Conn. processing additive isopropanolamine salt
solution
P-98-0631 03/25/98 06/23/98 CBI (S) Paper dye (G) 1H- imidazolium, 1,1
[alkanediylbis[4,1-
phenylazo(1,2-dihydro-6-
hydroxy-alkyl-2-oxo-3,5-
pyridindiyl)]]bis3-
[alkyll, salt with
alkanoic acid
P-98-0632 03/25/98 06/23/98 CBI (S) Paper dye (G) 1H-imidazolium, 1,1
[alkanediylbis[4,1-
phenylazo(1,2-dihydro-6-
hydroxy-alkyl-2-oxo-3,5-
pyridindiyl)]]bis3-
[alkyll, salt with
alkanoic acid*
P-98-0633 03/26/98 06/24/98 Salsbury Chemicals, (G) Chemical (G) Amino substituted
Inc. intermediate aromatic acid
derivative
P-98-0634 03/26/98 06/24/98 Henkel Adhesives (S) Hot melt adhesive (S) Fatty acids, C18-
unsaturated, dimers,
polymers with adipic
acid, ethylenediamine,
piperazime and
polypropylene glycol
diamine
P-98-0635 03/26/98 06/24/98 CBI (G) Used in plating (G) Substituted organic
for metal salt
electrodeposition of
nickel
P-98-0636 03/26/98 06/24/98 CBI (G) Resin for coating (G) Epoxy resin
P-98-0637 03/26/98 06/24/98 CBI (S) Resin for paints (G) Copolymer of methyl
methacrylate
--------------------------------------------------------------------------------------------------------------------------------------------------------
List of Subjects
Environmental protection, Premanufacture notices.
Dated: April 20, 1998.
Oscar Morales,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 98-11415 Filed 4-28-98; 8:45 am]
BILLING CODE 6560-50-F