[Federal Register Volume 60, Number 63 (Monday, April 3, 1995)]
[Notices]
[Pages 16850-16854]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 95-8069]
[[Page 16850]]
DEPARTMENT OF COMMERCE
National Institute of Standards and Technology
[Docket No. 950314074-5074-01]
RIN 0693-AB39
Proposed Revision of Federal Information Proceeding Standard
(FIPS) 128-1, Computer Graphics Metafile (CGM)
AGENCY: National Institute of Standards and Technology (NIST),
Commerce.
ACTION: Notice; request for comments.
-----------------------------------------------------------------------
SUMMARY: NIST is proposing a revision of FIPS PUB 128-1, CGM, to adopt
voluntary industry specification American National Standards Institute/
International Organization for Standardization (ANSI/ISO) Computer
Graphics Metafile (CGM), ANSI/ISO 8632.1-4:1992[1994], and ISO
8632:1992/Amd. 1:1995, and to adopt three CGM profiles.
Prior to the submission of this proposed revision to FIPS 128-1 to
the Secretary of Commerce for review and approval, it is essential to
assure that consideration is given to the needs and views of
manufacturers, the public, and State and local governments. The purpose
of this notice is to solicit such views,
This proposed revision contains two sections: (1) An announcement
section, which provides information concerning the applicability,
implementation, and maintenance of the standards; and (2) a
specification section. Only the announcement section of the standard is
provided in this notice. Interested parties may obtain copies of the
specifications ANSI/ISO 8632.1-4:1992[1994] and CGM Amendment 1: Rules
of Profiles, ISO 8632:1992/Amd. 1:1994 from the American National
Standards Institute (ANSI), 11 West 42nd Street, 13th Floor, New York,
NY 10036, (212) 642-4900. To obtain copies of the three proposed CGM
profiles (ATA Specification 2100, Model Profile, and MIL-D-28003A),
contact the Standards Processing Coordinator, National Institute of
Standards and Technology, Technology Building, Room B-64, Gaithersburg,
MD 20899, telephone (301) 975-2816.
DATES: Comments on this proposed revision must be received on or before
July 3, 1995.
ADDRESSES: Written comments concerning the adoption of this proposed
revision should be sent to: Director, Computer Systems Laboratory,
ATTN: Proposed Revision of FIPS 128-1, CGM, Technology Building, Room
B154, national Institute of Standards and Technology, Gaithersburg, MD
20899.
Written comments received in response to this notice will be made
part of the public record and will be made available for inspection and
copying in the Central Reference and Records Inspection Facility, Room
6020, Herbert C. Hoover Building, 14th Street between Pennsylvania and
Constitution Avenues NW., Washington, DC 20230.
FOR FURTHER INFORMATION CONTACT:
Ms. Lynne Rosenthal, National Institute of Standards and Technology,
Gaithersburg, MD 20899, telephone (301) 975-3353.
Executive Order 12866: This FIPS notice has been determined to be
``not significant'' for purposes of E.O. 12866.
Dated: March 28, 1995.
Samuel Kramer,
Associate Director.
Proposed Federal Information Processing Standards Publication 128-2
Date
Announcing the Standard for Computer Graphics Metafile (CGM)
Federal Information Processing Standards Publications (FIPS PUBS)
are issued by the National Institute of Standards and Technology (NIST)
after approval by the Secretary of Commerce pursuant to Section 111(d)
of the Federal Property and Administration Service Act of 1949 as
amended by the Computer Security Act of 1987, Public Law 100-235.
1. Name of Standard. Computer Graphics Metafile (CGM) (FIPS PUB
128-2).
2. Category of Standard. Software Standard, Graphics.
3. Explanation. This publication is a revision of FIPS PUB 128-
1. This revision supersedes FIPS PUB 128-1 is its entirety and
modifies the standard by:
(1) Adopting the Computer Graphics Metafile standard designated,
ANSI/ISO 8632.1-4: 1992[1994], and CGM Amendment 1: Rules for Profiles,
ISO 8632:1992.Amd. 1:1994;
(2) Requiring the use of conforming profiles. Conformance of
metafiles (i.e., date files) and implementations (i.e., generators and
interpreters) is defined in terms of conformance to profiles; and
(3) Adopting several profiles, one of which is required for
implementation of this FIPS PUB.
FIPS PUB 128-2 adopts the American National Standards Institute/
International Organization for Standardization (ANSI/ISO) 8632.1-
4:1992[1994], ISO 8632:1992/Amd. 1:1994, and the following profiles:
(1) Model Profile as contained in CGM Amendment 1;
(2) Air Transport Association (ATA) Specification 2100, Graphics
Exchange for CGM;
(3) Continuous Acquisition and Life-Cycle Support (CALS), MIL-D-
28003A.
CGM is a graphics data interchange standard which defines a neutual
computer-interpretable representation of 2D graphical (pictorial)
information in a manner that is independent from any particular
application or system. The purpose of the standard is to facilitate the
storage and retrieval of graphical information between applications,
software systems, and/or devices. A CGM can contain:
--Vector graphics (e.g., polylines, ellipses, NURBS);
--Raster graphics (e.g., tile array); and
--Text,
The CGM standard defines three upward compatible versions. Each version
provides additional functionality.
CGM Amendment 1 provides the rules for defining profiles of CGM and
conformance requirements for profiles, metafiles, and implementations.
Since a proliferation of CGM profiles is not desirable, only those
profiles needed for Federal agency use have been added to the FIPS CGM.
The exact specification is in Section 10 of this standard.
4. Approving Authority. Secretary of Commerce.
5. Maintenance Agency. Department of Commerce, National Institute
of Standards and Technology (NIST), Computer Systems Laboratory (CSL).
6. Cross index.
a. American National Standard/International Organization for
Standardization (ANSI/ISO) Computer Graphics Metafile (CGM), ANSI/ISO
8632.1-4:1992 [1994] (Part 1: Functional Specifications; Part 2:
Character Encoding; Part 3: Binary Encoding; Part 4: Clear Text
Encoding).
b. International Organization for Standardization (ISO) Computer
Graphics Metafile (CGM), ISO 8632:1992/Amd. 1:1994.
c. Air Transport Association Specification 2100, Digital Data
Standards for Aircraft Support, Graphics Exchange v2.1, October 1994.
d. Military Specification, Digital Representation of Illustration
Data: CGM Application Profile (AP), MIL-D-28003A, November 15, 1991.
7. Related Documents. Related ISO documents are listed in the
reference section of the CGM standard, ANSI/ISO 8632.1-4:1992 [1994].
a. Federal Information Processing Standards Publication (FIPS PUB)
29-3, [[Page 16851]] Interpretation Procedures for FIPS Software.
b. Federal Information Processing Standards Publication (FIPS PUB)
120-1, Graphical Kernel System (GKS).
c. Federal Information Resources Management Regulations 201-20.303,
Standards, and subpart 201-39.1002, Federal Standards.
d. NISTIR 5475, Validated Products List, J. Kailey and P. Himes,
editors, republished quarterly.
e. NISTIR 5372, CGM: Procedures for NIST CGM Validation Test
Service, L. Rosenthal and J. Schneider, February 1994.
f. ISO 10641-1992, Conformance Testing of Implementations of
Graphics Standards.
8. Objectives. The primary objectives of this standard are:
--To reduce the overall life-cycle cost for digital systems by
establishing a common exchange format for storing, transferring, and
archiving graphical data across organizational boundaries and
independent from any particular system.
--To promote the exchange of graphical information enabling
applications to share data and reduce time spent recomputing in efforts
to regenerate pictorial information.
--To specify application profiles which provide functional subsets of
the CGM standard and maximize the probability of interchange between
systems implementing the profile.
--To promote the use and development of conforming profiles and the
harmonization of conformance testing efforts for metafiles, generators,
and interpreters.
9. Applicability.
9.1 Applications acquired for government use which purport to
create or read graphical pictures shall contain a conforming CGM
generator or CGM interpreter. FIPS CGM enables the representation,
transfer, and storage of graphical information between different
software systems, graphics devices, and/or applications (e.g., word
processing, publishing, drawing, spreadsheet, computer-aided design).
9.2 FIPS CGM shall be used when one or more of the following
situations exist:
--Graphical information (e.g. illustrations, clip art) will be acquired
for government use and incorporated into computer applications or
documents.
--Computer applications, programs, systems, or devices will be acquired
and used to create, modify, display, or render grapical information.
--Graphical information created by an application will be reviewed,
modified, or incorporated into another application on the same or
different computer systems.
--Graphical information will be used and maintained by other than the
original designer.
--Graphical information will be used by multiple people, groups, or
organizations within the Government or private sector.
9.3 The use of a profile is required for all metafiles and
implementations of CGM. A profile defines the options, elements, and
parameters of ANSI/ISO 8632 necessary to accomplish a particular
function and to maximize the probability of interchange between systems
implementing the profile. A profile addresses metafile requirements as
well as implementation requirements. The profiles added by this FIPS
CGM are required for industry specific and Federal government
applications.
--Model Profile: The Model Profile is appropriate for basic scientific
and technical graphics (e.g., computer-aided design, mapping, earth
sciences, cartography) and presentation, visualization, and publishing
applications (graphics arts, high end desk top publishing). This is a
general purpose profile which supports all three CGM encodings at the
CGM version 3 functionality level. For FIPS CGM, if no profile is
specified, the Model Profile will be assumed by default.
--ATA Specification 2100: The ATA profile is appropriate for
presentation, visualization, and publishing applications (e.g.,
graphical arts, imaging, electronic review of documents, hypermedia,
and multimedia documents). Although similar to the Model Profile, the
ATA profile allows for symbol libraries and the use of intelligent
graphics (i.e., graphics which contain application-specific information
along with the information necessary to render a picture). This
profile, developed by the Air Transport Association, supports the
binary and clear text encodings at the CGM version 3 functionality
level. Except for metafiles containing symbols or raster images, the
ATA profile limits the number of pictures per metafiles to one.
--MIL-D-28003A: The CALS profile is appropriate for basic scientific
and technical graphics, presentation and publishing applications (e.g.,
business presentation graphics, desktop publishing). In addition, this
profile is appropriate for a basic level of general-purpose graphical
interchange. This profile, developed by CALS, supports only the binary
encoding and is limited (by this FIPS CGM) to the CGM version 1
functionality level.
The diagram illustrates the relationship between the profiles. The
x-axis represents the level of functionality by CGM version; the y-axis
represents the complexity of problems that can be solved.
BILLING CODE 3510-CN-M
[[Page 16852]]
[GRAPHIC][TIFF OMITTED]TN03AP95.000
BILLING CODE 3510-CN-C
[[Page 16853]]
10. Specifications. ANSI/ISO 8632.1-4:1992[1994], Computer Graphics
Metafile, defines the scope of the specifications, the syntax, and
semantics of the CGM elements. The ANSI/ISO 8632 consists of four
parts: (Part 1: Functional Specifications; Part 2: Character and
Coding; Part 3: Binding and Coding; Part 4: Clear Text Encoding). ISO
8632:1994/Amd. 1 defines the rules for profiles, conformance, and the
Model profile, an instance of a CGM profile. In addition, one of the
following profiles shall be used when implementing FIPS CGM: the Model
Profile as specified in ISO 8632:1992/Amd. 1:1994, the ATA
Specification 2100 Graphics Exchange for CGM, or the Military
Specification MIL-D-28003A.
All implementations claiming conformance to this FIPS CGM must
adhere to the specific requirements defined in the ``Conformance''
clause of ISO 8632:1992/Amd. 1:1994 and the application profile.
11. Implementation. The implementation of this standard involves
four areas of consideration: effective date, acquisition,
interpretation, and validation.
11.1 Effective Date. This publication is effective six (6) months
after date of publication upon final announcement in the Federal
Register. A transition period of twelve (12) months, beginning on the
effective date, allows industry to produce CGM implementations and CGM
files conforming to this standard. Agencies are encouraged to use this
standard for solicitation proposals during the transition period. This
standard is mandatory for use in all solicitation proposals for CGM
files and implementations (i.e., products or software containing CGM
generators and/or interpreters) acquired twelve (12) months after the
effective date.
11.2 Acquisition of CGM Files and Implementations. The use of one
of the profiles specified in Section 9.3 is required for conformance to
CGM. Agencies should specify a profile in all acquisitions.
Conformance to this standard shall be considered whether CGM files
or implementations are developed internally, acquired as part of a
system procurement, acquired by separate procurement, used under a
leasing agreement, or specified for use in contracts for programming
services. Recommended terminology for procurement of FIPS CGM is
contained in the U.S. General Services Administration publication
Federal ADP and Telecommunications Standards Index, Chapter 5, Part 1.
11.3 Interpretation of FIPS CGM. Resolution of questions regarding
this standard will be provided by NIST. Procedures for interpretations
are specified in FIPS PUB 29-3. Questions concerning the content and
specifications should be addressed to: Director, Computer Systems
Laboratory, Attn: CGM Interpretation, National Institute of Standards
and Technology, Gaithersburg, MD 20899.
11.4 Validation of CGM Files and Implementations. CGM files and
implementations of FIPS CGM shall be validated in accordance with the
NIST Computer Systems Laboratory (CSL) validation procedures for FIPS
CGM, NISTIR 5372, Procedures for the NIST CGM Validation Test Service.
Recommended procurement terminology for validation of FIPS CGM is
contained in the U.S. General Services Administration publication
Federal ADP and Telecommunications Standards Index, Chapter 5, Part 2.
This GSA publication provides terminology for three validation options:
Delayed Validation, Prior Validation Testing, and Prior Validation. The
agency shall select the appropriate validation option and shall specify
appropriate time frames for validation and correction of
nonconformities. The agency is advised to refer to the NIST publication
Validated Products List for information about the validation status of
CGM products. This information may be used to specify validation time
frames that are not unduly restrictive of competition.
Metafiles and implementations shall be evaluated in terms of
conformance to a particular profile of CGM, using the NIST CGM Test
Service. If no profile is specified, the Model Profile will be used.
The goal of the NIST CGM Test Service, is to assist users and vendors
in determining compliance to FIPS PUB 128-2. The results of validation
testing by the NIST CGM Validation Test Service are published on a
quarterly basis in the Validated Products List, available from the
National Technical Information Service (NTIS).
Current information about the NIST CGM Validation Test Service and
validation procedures for FIPS CGM is available from: National
Institute of Standards and Technology, Computer Systems Laboratory,
Graphics Software Group, CGM Test Service, Building 225, Room A266,
Gaithersburg, MD 20899, (301) 975-3265.
12. Waivers.
Under certain exceptional circumstances, the heads of Federal
departments and agencies may approve waivers to Federal Information
Processing Standards (FIPS). The head of such agency may redelegate
such authority only to a senior official designated pursuant to section
3506(b) of title 44, U.S. Code. Waivers shall be granted only when:
a. Compliance with a standard would adversely affect the
accomplishment of the mission of an operator of a Federal computer
system, or
b. Cause a major adverse financial impact on the operator which is
not offset by Governmentwide savings.
Agency heads may act upon a written waiver request containing the
information detailed above. Agency heads may also act without a written
waiver request when they determine that conditions for meeting the
standard cannot be met. Agency heads may approve waivers only by a
written decision which explains the basis on which the agency head made
the required finding(s). A copy of each such decision, with procurement
sensitive or classified portions clearly identified, shall be sent to:
National Institute of Standards and Technology; ATTN: FIPS Waiver
Decisions, Technology Building, Room B-154; Gaithersburg, MD 20899.
In addition, notice of each waiver granted and each delegation of
authority to approve waivers shall be sent promptly to the Committee on
Government Operations of the House of Representatives and the Committee
on Governmental Affairs of the Senate and shall be published promptly
in the Federal Register.
When the determination on a waiver applies to the procurement of
equipment and/or services, a notice of the waiver determination must be
published in the Commerce Business Daily as a part of the notice of
solicitation for offers of an acquisition or, if the waiver
determination is made after that notice is published, but amendment to
such notice.
A copy of the waiver, any supporting documents, the document
approving the waiver and any supporting and accompanying documents,
with such deletions as the agency is authorized and decides to make
under 5 U.S.C. Sec. 552(b), shall be part of the procurement
documentation and retained by the agency.
13. Where to Obtain Copies. Copies of this publication are for sale
by the National Technical Information Service, U.S. Department of
Commerce, Springfield, VA 22161. (Sale of the included specifications
document is by arrangement with the American National Standards
Institute.) When ordering, refer to Federal Information Processing
Standards Publication 128-2 (FIPSPUB128-2), and title. Payment
[[Page 16854]] may be made by check, money order, or NTIS deposit
account.
[FR Doc. 95-8069 Filed 3-31-95; 8:45 am]
BILLING CODE 3510-CN-M
