2016-07482. MET Laboratories, Inc.: Grant of Expansion of Recognition and Modification to the NRTL Program's List of Appropriate Test Standards

AGENCY:

Occupational Safety and Health Administration (OSHA), Labor.

ACTION:

Notice.

SUMMARY:

In this notice, OSHA announces its final decision to expand the scope of recognition for MET Laboratories, Inc. as a Nationally Recognized Testing Laboratory (NRTL).

DATES:

The expansion of the scope of recognition becomes effective on April 4, 2016.

FOR FURTHER INFORMATION CONTACT:

Information regarding this notice is available from the following sources:

Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Communications, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3647, Washington, DC 20210; telephone: [phone]; email: [e-mail].

General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210; telephone: [phone]; email: [e-mail]. OSHA's Web page includes information about the NRTL Program (see http://www.osha.gov/​dts/​otpca/​nrtl/​index.html).

SUPPLEMENTARY INFORMATION:

I. Notice of Final Decision

OSHA hereby gives notice of the expansion of the scope of recognition of MET Laboratories, Inc. (MET), as an NRTL. MET's expansion covers the addition of five test standards to its scope of recognition. Additionally, OSHA announces a modification to the NRTL Program's List of Appropriate Test Standards to include three additional test standards.

OSHA recognition of an NRTL signifies that the organization meets the requirements specified by 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.

The Agency processes applications by an NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding and, in the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL that details its scope of recognition. These pages are available from the Agency's Web site at http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

MET submitted five applications, two dated April 6, 2015, (OSHA-2006-0028-0020) and three dated May 29, 2015 (OSHA-2006-0028-0021), to expand its recognition to include five additional test standards, including three test standards to be added to the NRTL Program's List of Appropriate Test Standards. OSHA staff performed a detailed analysis of the application packets and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

OSHA published the preliminary notice announcing MET's expansion application and modification to the NRTL Program's List of Appropriate Test Standards in the Federal Register on January 22, 2016 (81 FR 3830). The Agency requested comments by February 8, 2016, but it received no comments in response to this notice. OSHA is now proceeding with this final notice to grant expansion of MET's scope of recognition and modification to the NRTL Program's List of Appropriate Test Standards.

To obtain or review copies of all public documents pertaining to MET's application, go to www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 20210. Docket No. OSHA-2006-0028 contains all materials in the record concerning MET's recognition.

II. Final Decision and Order

OSHA staff examined MET's expansion applications, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that MET meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the specified limitation and conditions listed below. OSHA, therefore, is proceeding with this final notice to grant MET's scope of recognition. OSHA limits the expansion of MET's recognition to testing and certification of products for demonstration of conformance to the test standards listed in Table 1 below.

Additionally, Table 2, below, lists the test standards new to the NRTL Program's List of Appropriate Test Standards. The Agency evaluated the standards to (1) verify they represent a product category for which OSHA requires certification by an NRTL, (2) verify the documents represent end products and not components, and (3) verify the documents define safety test specifications (not installation or operational performance specifications). Based on this evaluation, OSHA finds that they are appropriate test standards and has added these standards to the NRTL Program's List of Appropriate Test Standards.

Table 1—List of Appropriate Test Standards for Inclusion in MET's NRTL Scope of Recognition

Test standard	Test standard title
UL 2738	Standard for Induction Power Transmitters and Receivers for Use with Low Energy Products.
UL 8750	Standard for Light Emitting Diode (LED) Equipment for Use in Lighting Products.
UL 8752 *	Organic Light Emitting Diode (LED) Panels.
UL 2735 *	Standard for Electric Utility Meters.
UL 2594 *	Standard for Electric Vehicle Supply Equipment.
* Represents a new standard that OSHA is adding to the NRTL Program's List of Appropriate Test Standards, as specified in Table 2 below.

Table 2—Test Standards OSHA Is Adding to the NRTL Program's List of Appropriate Test Standards

Test standard	Test standard title
UL 2735	Standard for Electric Utility Meters.
UL 2594	Standard for Electric Vehicle Supply Equipment.
UL 8752	Organic Light Emitting Diode (LED) Panels.

OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, an NRTL's scope of recognition does not include these products.

The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

A. Conditions

In addition to those conditions already required by 29 CFR 1910.7, MET must abide by the following conditions of the recognition:

1. MET must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as an NRTL, and provide details of the change(s);

2. MET must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and

3. MET must continue to meet the requirements for recognition, including all previously published conditions on MET's scope of recognition, in all areas for which it has recognition.

Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of MET, subject to the limitation and conditions specified above, and adds three standards to the NRTL Program's List of Appropriate Test Standards..

Authority and Signature

David Michaels, Ph.D., MPH, Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW., Washington, DC 20210, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

Signed at Washington, DC, on March 29, 2016.

David Michaels,

Assistant Secretary of Labor for Occupational Safety and Health.