2017-06765. MET Laboratories, Inc.: Grant of Expansion of Recognition and Modification to the NRTL Program's List of Appropriate Test Standards  

  • Start Preamble

    AGENCY:

    Occupational Safety and Health Administration (OSHA), Labor.

    ACTION:

    Notice.

    SUMMARY:

    In this notice, OSHA announces its final decision to expand the scope of recognition for MET Laboratories, Inc., as a Nationally Recognized Testing Laboratory (NRTL).

    DATES:

    The expansion of the scope of recognition becomes effective on April 5, 2017.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Information regarding this notice is available from the following sources:

    Press inquiries: Contact Mr. Frank Meilinger, Director, OSHA Office of Start Printed Page 16631Communications, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3647, Washington, DC 20210; telephone: (202) 693-1999; email: meilinger.francis2@dol.gov.

    General and technical information: Contact Mr. Kevin Robinson, Director, Office of Technical Programs and Coordination Activities, Directorate of Technical Support and Emergency Management, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-3655, Washington, DC 20210; telephone: (202) 693-2110; email: robinson.kevin@dol.gov. OSHA's Web page includes information about the NRTL Program (see http://www.osha.gov/​dts/​otpca/​nrtl/​index.html).

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    I. Notice of Final Decision

    OSHA hereby gives notice of the expansion of the scope of recognition of MET Laboratories, Inc. (MET), as a NRTL. MET's expansion covers the addition of five test standards to its scope of recognition, including one test standard that will be added to the NRTL List of Appropriate Test Standards.

    OSHA recognition of an NRTL signifies that the organization meets the requirements specified by 29 CFR 1910.7. Recognition is an acknowledgment that the organization can perform independent safety testing and certification of the specific products covered within its scope of recognition and is not a delegation or grant of government authority. As a result of recognition, employers may use products properly approved by the NRTL to meet OSHA standards that require testing and certification of the products.

    The Agency processes applications by a NRTL for initial recognition, or for expansion or renewal of this recognition, following requirements in Appendix A to 29 CFR 1910.7. This appendix requires that the Agency publish two notices in the Federal Register in processing an application. In the first notice, OSHA announces the application and provides its preliminary finding and, in the second notice, the Agency provides its final decision on the application. These notices set forth the NRTL's scope of recognition or modifications of that scope. OSHA maintains an informational Web page for each NRTL that details its scope of recognition. These pages are available from the Agency's Web site at http://www.osha.gov/​dts/​otpca/​nrtl/​index.html.

    MET submitted five applications, four dated July 7, 2015 (OSHA-2006-0028-0026), (OSHA-2006-0028-0027), (OSHA-2006-0028-0028), (OSHA-2006-0028-0029) and one dated August 4, 2015 (OSHA-2006-0028-0025), to expand its recognition to include five additional test standards. OSHA staff performed a comparability analysis and reviewed other pertinent information. OSHA did not perform any on-site reviews in relation to this application.

    OSHA published the preliminary notice announcing MET's expansion application in the Federal Register on November 15, 2016 (81 FR 80089). The Agency requested comments by November 30, 2016, but it received no comments in response to this notice. OSHA now is proceeding with this final notice to grant expansion of MET's scope of recognition.

    To obtain or review copies of all public documents pertaining to the MET's application, go to www.regulations.gov or contact the Docket Office, Occupational Safety and Health Administration, U.S. Department of Labor, 200 Constitution Avenue NW., Room N-2625, Washington, DC 20210. Docket No. OSHA-2006-0028 contains all materials in the record concerning MET's recognition.

    II. Final Decision and Order

    OSHA staff examined MET's expansion applications, its capability to meet the requirements of the test standards, and other pertinent information. Based on its review of this evidence, OSHA finds that MET meets the requirements of 29 CFR 1910.7 for expansion of its recognition, subject to the limitation and conditions listed below. OSHA, therefore, is proceeding with this final notice to grant MET's scope of recognition. OSHA limits the expansion of MET's recognition to testing and certification of products for demonstration of conformance to the test standards listed in Table 1 below.

    Table 1—List of Appropriate Test Standards for Inclusion in MET's NRTL Scope of Recognition

    Test standardTest standard title
    UL 62368-1Audio/Video, Information and Communication Technology Equipment—Part 1: Safety Requirements.
    UL 60079-0Explosive Atmospheres—Part 0: Equipment—General Requirements.
    UL 60079-2Explosive Atmospheres—Part 2: Equipment Protection by Pressurized Enclosure “p”.
    UL 60079-11Explosive Atmospheres—Part 11: Equipment Protection by Intrinsic Safety “i”.
    UL 60079-15Explosive Atmospheres—Part 15: Equipment Protection by Type of Protection “n”.

    In this notice, OSHA also announces the addition of a new test standard to the NRTL Program's List of Appropriate Test Standards. Table 2, below, lists the test standard that is new to the NRTL Program. OSHA has determined that this test standard is an appropriate test standard and will include it in the NRTL Program's List of Appropriate Test Standards.

    Table 2—Test Standard OSHA Is Adding to the NRTL Program's List of Appropriate Test Standards

    Test standardTest standard title
    UL 60079-2Explosive Atmospheres—Part 2: Equipment Protection by Pressurized Enclosure “p”.

    OSHA's recognition of any NRTL for a particular test standard is limited to equipment or materials for which OSHA standards require third-party testing and certification before using them in the workplace. Consequently, if a test standard also covers any products for which OSHA does not require such testing and certification, an NRTL's scope of recognition does not include these products.Start Printed Page 16632

    The American National Standards Institute (ANSI) may approve the test standards listed above as American National Standards. However, for convenience, we may use the designation of the standards-developing organization for the standard as opposed to the ANSI designation. Under the NRTL Program's policy (see OSHA Instruction CPL 1-0.3, Appendix C, paragraph XIV), any NRTL recognized for a particular test standard may use either the proprietary version of the test standard or the ANSI version of that standard. Contact ANSI to determine whether a test standard is currently ANSI-approved.

    A. Conditions

    In addition to those conditions already required by 29 CFR 1910.7, MET must abide by the following conditions of the recognition:

    1. MET must inform OSHA as soon as possible, in writing, of any change of ownership, facilities, or key personnel, and of any major change in its operations as a NRTL, and provide details of the change(s);

    2. MET must meet all the terms of its recognition and comply with all OSHA policies pertaining to this recognition; and

    3. MET must continue to meet the requirements for recognition, including all previously published conditions on MET's scope of recognition, in all areas for which it has recognition.

    Pursuant to the authority in 29 CFR 1910.7, OSHA hereby expands the scope of recognition of MET, subject to the limitation and conditions specified above.

    III. Authority and Signature

    Dorothy Dougherty, Deputy Assistant Secretary of Labor for Occupational Safety and Health, 200 Constitution Avenue NW., Washington, DC 20210, authorized the preparation of this notice. Accordingly, the Agency is issuing this notice pursuant to 29 U.S.C. 657(g)(2), Secretary of Labor's Order No. 1-2012 (77 FR 3912, Jan. 25, 2012), and 29 CFR 1910.7.

    Start Signature

    Signed at Washington, DC, on March 22, 2017.

    Dorothy Dougherty,

    Deputy Assistant Secretary of Labor for Occupational Safety and Health.

    End Signature End Supplemental Information

    [FR Doc. 2017-06765 Filed 4-4-17; 8:45 am]

    BILLING CODE 4510-26-P