2024-09457. Aluminum Lithographic Printing Plates From the People's Republic of China: Preliminary Affirmative Determination of Sales at Less Than Fair Value, Preliminary Affirmative Determination of Critical Circumstances, and Postponement of Final ...  

  • Start Preamble

    AGENCY:

    Enforcement and Compliance, International Trade Administration, Department of Commerce.

    SUMMARY:

    The U.S. Department of Commerce (Commerce) preliminarily determines that aluminum lithographic printing plates (printing plates) from People's Republic of China (China) are being, or are likely to be, sold in the United States at less than fair value (LTFV). The period of investigation (POI) is January 1, 2023, through June 30, 2023. Interested parties are invited to comment on this preliminary determination.

    DATES:

    Applicable May 1, 2024.

    Start Further Info

    FOR FURTHER INFORMATION CONTACT:

    Benito Ballesteros, AD/CVD Operations, Office IX, Enforcement and Compliance, International Trade Administration, U.S. Department of Commerce, 1401 Constitution Avenue NW, Washington, DC 20230; telephone: (202) 482-7425.

    End Further Info End Preamble Start Supplemental Information

    SUPPLEMENTARY INFORMATION:

    Background

    This preliminary determination is made in accordance with section 733(b) of the Tariff Act of 1930, as amended (the Act). Commerce initiated this investigation on October 18, 2023.[1] On February 14, 2024, Commerce postponed the preliminary determination of this investigation, and the revised deadline is now April 25, 2024.[2]

    For a complete description of the events that followed the initiation of this investigation, see the Preliminary Decision Memorandum.[3] A list of topics addressed in the Preliminary Decision Memorandum is included as Appendix II to this notice. The Preliminary Decision Memorandum is a public document and is on file electronically via Enforcement and Compliance's Antidumping and Countervailing Duty Centralized Electronic Service System (ACCESS). ACCESS is available to registered users at https://access.trade.gov. In addition, a complete version of the Preliminary Decision Memorandum can be accessed directly at https://access.trade.gov/​public/​FRNoticesListLayout.aspx.

    Scope of the Investigation

    The products covered by this investigation are printing plates from China. For a complete description of the scope of this investigation, see Appendix I.

    Scope Comments

    In accordance with the preamble to Commerce's regulations,[4] the Initiation Notice set aside a period of time for parties to raise issues regarding product coverage ( i.e., scope).[5] No interested party commented on the scope of the investigation as it appeared in the Initiation Notice. Therefore, Commerce is not preliminarily modifying the scope language as it appeared in the Initiation Notice. See the scope in Appendix I to this notice.

    Methodology

    Commerce is conducting this investigation in accordance with section 731 of the Act. Commerce has calculated constructed export prices in accordance with section 772(b) of the Act. Because China is a non-market economy, within the meaning of section 771(18) of the Act, Commerce has calculated normal value in accordance with section 773(c) of the Act. Furthermore, pursuant to sections 776(a) and (b) of the Act, Commerce preliminarily has relied upon facts otherwise available, with adverse inferences, in determining the estimated weighted-average dumping margin for the China-wide entity. For a full description of the methodology underlying Commerce's preliminary determination, see the Preliminary Decision Memorandum.

    Preliminary Affirmative Determination of Critical Circumstances

    In accordance with section 733(e) of the Act and 19 CFR 351.206, Commerce preliminarily determines that critical Start Printed Page 35063 circumstances exist with respect to imports of printing plates from China for Fujifilm Printing Plate (China) Co., Ltd. (Fujifilm) and the China-wide entity. For a full description of the methodology and results of Commerce's critical circumstances analysis, see the Preliminary Decision Memorandum.

    Combination Rates

    In the Initiation Notice,[6] Commerce stated that it would calculate producer/exporter combination rates for the respondents that are eligible for a separate rate in this investigation. Policy Bulletin 05.1 describes this practice.[7]

    Preliminary Determination

    Commerce preliminarily determines that the following estimated weighted-average dumping margins exist:

    ProducerExporterEstimated weighted- average dumping margin (percent)Cash deposit rate (adjusted for subsidy offset) (percent)
    Fujifilm Printing Plate (China) Co., LtdFujifilm Printing Plate (China) Co., Ltd38.5738.56
    China-wide Entity107.62107.61

    Suspension of Liquidation

    In accordance with section 733(d)(2) of the Act, Commerce will direct U.S. Customs and Border Protection (CBP) to suspend liquidation of subject merchandise, as described in Appendix I, entered, or withdrawn from warehouse, for consumption, as discussed below. Further, pursuant to section 733(d)(1)(B) of the Act and 19 CFR 351.205(d), Commerce will instruct CBP to require a cash deposit equal to the weighted average amount by which normal value exceeds U.S. price, as indicated in the chart above, as follows: (1) for the producer/exporter combinations listed in the table above, the cash deposit rate is equal to the estimated weighted-average dumping margin listed for that combination in the table; (2) for all combinations of Chinese producers/exporters of merchandise under consideration that have not established eligibility for their own separate rates, the cash deposit rate will be equal to the estimated weighted-average dumping margin established for the China-wide entity; and (3) for all third-county exporters of merchandise under consideration not listed in the table above, the cash deposit rate is the cash deposit rate applicable to the Chinese producer/exporter combination (or the China-wide entity) that supplied that third-country exporter.

    Should the final estimated weighted-average dumping margin be zero or de minimis for the producer/exporter combination identified above, entries of merchandise from this producer/exporter combination will be excluded from the order. Such exclusion will not be applicable to merchandise exported to the United States by any other producer/exporter combinations or by third country exporters that sourced from the excluded producer/exporter combination.

    Section 733(e)(2) of the Act provides that, given an affirmative determination of critical circumstances, any suspension of liquidation shall apply to unliquidated entries of merchandise entered, or withdrawn from warehouse, for consumption on or after the later of: (a) the date which is 90 days before the date on which the suspension of liquidation was first ordered; or (b) the date on which notice of initiation of the investigation was published. Commerce preliminarily finds that critical circumstances exist for imports of subject merchandise from Fujifilm and the China-wide entity. In accordance with section 733(e)(2)(A) of the Act, the suspension of liquidation shall apply to all unliquidated entries of merchandise that were entered, or withdrawn from warehouse, for consumption on or after the date which is 90 days before the publication of this notice.

    To determine the cash deposit rate, Commerce normally adjusts the estimated weighted-average dumping margin by the amount of domestic subsidy pass-through and export subsidies determined in a companion countervailing duty (CVD) proceeding when CVD provisional measures are in effect. Accordingly, where Commerce has made a preliminary affirmative determination for domestic subsidy pass-through or export subsidies, Commerce has offset the calculated estimated weighted-average dumping margin by the appropriate rate(s). Any such adjusted rates may be found in the “Preliminary Determination” section's chart of estimated weighted-average dumping margins above.

    Should provisional measures in the companion CVD investigation expire prior to the expiration of provisional measures in this LTFV investigation, Commerce will direct CBP to begin collecting cash deposits at a rate equal to the estimated weighted-average dumping margins calculated in this preliminary determination unadjusted for the passed-through domestic subsidies or for export subsidies at the time the CVD provisional measures expire.

    These suspension of liquidation instructions will remain in effect until further notice.

    Disclosure

    Commerce intends to disclose to interested parties the calculations performed in connection with this preliminary determination within five days of its public announcement or, if there is no public announcement, within five days of the date of publication of this notice in accordance with 19 CFR 351.224(b).

    Verification

    As provided in section 782(i)(1) of the Act, Commerce intends to verify the information relied upon in making its final determination.

    Public Comment

    Case briefs or other written comments may be submitted to the Assistant Secretary for Enforcement and Compliance no later than seven days after the date on which the last verification report is issued in this investigation. Rebuttal briefs, limited to issues raised in the case briefs, may be filed not later than five days after the date for filing case briefs.[8] Interested Start Printed Page 35064 parties who submit case briefs or rebuttal briefs in this investigation must submit: (1) a statement of the issue; (2) a brief summary of the argument; and (3) a table of authorities.[9]

    As provided under 19 CFR 351.309(c)(2) and (d)(2), in prior proceedings we have encouraged interested parties to provide an executive summary of their brief that should be limited to five pages total, including footnotes. In this investigation, we instead request that interested parties provide at the beginning of their briefs a public, executive summary for each issue raised in their briefs.[10] Further, we request that interested parties limit their executive summary of each issue to no more than 450 words, not including citations. We intend to use the executive summaries as the basis of the comment summaries included in the issues and decision memorandum that will accompany the final determination in this investigation. We request that interested parties include footnotes for relevant citations in the executive summary of each issue. Note that Commerce has amended certain of its requirements pertaining to the service of documents in 19 CFR 351.303(f).[11]

    Pursuant to 19 CFR 351.310(c), interested parties who wish to request a hearing, limited to issues raised in the case and rebuttal briefs, must submit a written request to the Assistant Secretary for Enforcement and Compliance, U.S. Department of Commerce, within 30 days after the date of publication of this notice. Requests should contain the (1) party's name, address, and telephone number; (2) the number of participants and whether any participant is a foreign national; and (3) a list of the issues to be discussed. If a request for a hearing is made, Commerce intends to hold the hearing at a time and date to be determined.

    Postponement of Final Determination and Extension of Provisional Measures

    Section 735(a)(2) of the Act provides that a final determination may be postponed until not later than 135 days after the date of the publication of the preliminary determination if, in the event of an affirmative preliminary determination, a request for such postponement is made by exporters who account for a significant proportion of exports of the subject merchandise, or in the event of a negative preliminary determination, a request for such postponement is made by the petitioner. Pursuant to 19 CFR 351.210(e)(2), Commerce requires that requests by respondents for postponement of a final determination be accompanied by a request for extension of provisional measures from a four-month period to a period not more than six months in duration.

    On March 28, 2024, pursuant to 19 CFR 351.210(e), Fujifilm requested that Commerce postpone the final determination and extend provisional measures to a period not to exceed six months.[12] In accordance with section 735(a)(2)(A) of the Act and 19 CFR 351.210(b)(2)(ii), because: (1) the preliminary determination is affirmative; (2) the requesting exporter accounts for a significant proportion of exports of the subject merchandise; and (3) no compelling reasons for denial exist, Commerce is postponing the final determination and extending the provisional measures from a four-month period to a period not greater than six months. Accordingly, Commerce will make its final determination no later than 135 days after the date of publication of this preliminary determination.

    International Trade Commission Notification

    In accordance with section 733(f) of the Act, Commerce will notify the International Trade Commission (ITC) of its preliminary determination of sales at LTFV. If the final determination is affirmative, the ITC will determine before the later of 120 days after the date of this preliminary determination or 45 days after the final determination whether imports of the subject merchandise are materially injuring, or threaten material injury to, the U.S. industry.

    Notification to Interested Parties

    This determination is issued and published in accordance with sections 733(f) and 777(i)(1) of the Act, and 19 CFR 351.205(c).

    Start Signature

    Dated: April 25, 2024.

    Ryan Majerus,

    Deputy Assistant Secretary for Policy and Negotiations, performing the non-exclusive functions and duties of the Assistant Secretary for Enforcement and Compliance.

    End Signature

    Appendix I

    Scope of the Investigation

    The merchandise covered by this investigation is aluminum lithographic printing plates. Aluminum lithographic printing plates consist of a flat substrate containing at least 90 percent Aluminum. The aluminum-containing substrate is generally treated using a mechanical, electrochemical, or chemical graining process, which is followed by one or more anodizing treatments that form a hydrophilic layer on the aluminum-containing substrate. An image-recording, oleophilic layer that is sensitive to light, including but not limited to ultra-violet, visible, or infrared, is dispersed in a polymeric binder material that is applied on top of the hydrophilic layer, generally on one side of the aluminum lithographic printing plate. The oleophilic light-sensitive layer is capable of capturing an image that is transferred onto the plate by either light or heat. The image applied to an aluminum lithographic printing plate facilitates the production of newspapers, magazines, books, yearbooks, coupons, packaging, and other printed materials through an offset printing process, where an aluminum lithographic printing plate facilitates the transfer of an image onto the printed media. Aluminum lithographic printing plates within the scope of this investigation include all aluminum lithographic printing plates, irrespective of the dimensions or thickness of the underlying aluminum substrate, whether the plate requires processing after an image is applied to the plate, whether the plate is ready to be mounted to a press and used in printing operations immediately after an image is applied to the plate, or whether the plate has been exposed to light or heat to create an image on the plate or remains unexposed and is free of any image.

    Subject merchandise also includes aluminum lithographic printing plates produced from an aluminum sheet coil that has been coated with a light-sensitive image-recording layer in a subject country and that is subsequently unwound and cut to the final dimensions to produce a finished plate in a third country (including the United States), or exposed to light or heat to create an image on the plate in a third country (including in a foreign trade zone within the United States).

    Excluded from the scope of this investigation are lithographic printing plates manufactured using a substrate produced from a material other than aluminum, such as rubber or plastic.

    Aluminum lithographic printing plates are currently classifiable under Harmonized Tariff of the United States (HTSUS) subheadings 3701.30.0000 and 3701.99.6060. Further, merchandise that falls within the scope of this investigation may also be entered into the United States under HTSUS Start Printed Page 35065 subheadings 3701.99.3000 and 8442.50.1000. Although the HTSUS subheadings are provided for convenience and customs purposes, the written description of the scope of this investigation is dispositive.

    Appendix II

    List of Topics Discussed in the Preliminary Decision Memorandum

    I. Summary

    II. Background

    III. Period of Investigation

    IV. Discussion of the Methodology

    V. Currency Conversion

    VI. Preliminary Determination of Critical Circumstances

    VII. Adjustment Under Section 777A(F) of the Act

    VIII. Adjustment to Cash Deposit Rate for Export Subsidies

    IX. Recommendation

    End Supplemental Information

    Footnotes

    1.   See Aluminum Lithographic Printing Plates from the People's Republic of China and Japan: Initiation of Less-Than-Fair-Value Investigations,88 FR 73316 (October 25, 2023) ( Initiation Notice).

    Back to Citation

    2.   See Aluminum Lithographic Printing Plates from the People's Republic of China and Japan: Postponement of Preliminary Determinations in the Less-Than-Fair-Value Investigations,89 FR 11248 (February 14, 2024).

    Back to Citation

    3.   See Memorandum, “Decision Memorandum for the Preliminary Affirmative Determination in the Less-Than-Fair-Value Investigation of Aluminum Lithographic Printing Plates from the People's Republic of China,” dated concurrently with, and hereby adopted by, this notice (Preliminary Decision Memorandum).

    Back to Citation

    4.   See Antidumping Duties; Countervailing Duties, Final Rule,62 FR 27296, 27323 (May 19, 1997).

    Back to Citation

    5.   See Initiation Notic e, 88 FR at 73317.

    Back to Citation

    6.   Id. at 73320.

    Back to Citation

    7.   See Enforcement and Compliance's Policy Bulletin No. 05.1, regarding, “Separate-Rates Practice and Application of Combination Rates in Antidumping Investigations involving Non-Market Economy Countries,” (April 5, 2005) (Policy Bulletin 05.1), available on Commerce's website at https://enforcement.trade.gov/​policy/​bull05-1.pdf.

    Back to Citation

    8.   See19 CFR 351.309(d); see also19 CFR 351.303 (for general filing requirements).

    Back to Citation

    10.  We use the term “issue” here to describe an argument that Commerce would normally address in a comment of the Issues and Decision Memorandum.

    Back to Citation

    11.   See Administrative Protective Order, Service, and Other Procedures in Antidumping and Countervailing Duty Proceedings,88 FR 67069, 67077 (September 29, 2023).

    Back to Citation

    12.   See Fujifilm's Letter, “Fujifilm's Request to Postpone Final Determination,” dated March 28, 2024.

    Back to Citation

    [FR Doc. 2024-09457 Filed 4-30-24; 8:45 am]

    BILLING CODE 3510-DS-P

Document Information

Published:
05/01/2024
Department:
International Trade Administration
Entry Type:
Notice
Document Number:
2024-09457
Dates:
Applicable May 1, 2024.
Pages:
35062-35065 (4 pages)
Docket Numbers:
A-570-156
PDF File:
2024-09457.pdf