98-12342. Manufactured Home Construction and Safety Standards: Metal Roofing; Advance Notice of Proposed Rulemaking  

  • [Federal Register Volume 63, Number 91 (Tuesday, May 12, 1998)]
    [Proposed Rules]
    [Page 26392]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 98-12342]
    
    
    
    [[Page 26391]]
    
    _______________________________________________________________________
    
    Part VII
    
    
    
    
    
    Department of Housing and Urban Development
    
    
    
    
    
    _______________________________________________________________________
    
    
    
    24 CFR Part 3280
    
    
    
    Manufactured Home Construction and Safety Standards: Metal Roofing; 
    Advance Notice; Proposed Rule
    
    Federal Register / Vol. 63, No. 91 / Tuesday, May 12, 1998 / Proposed 
    Rules
    
    [[Page 26392]]
    
    
    
    DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT
    
    24 CFR Part 3280
    
    [Docket No. FR-4271-A-02]
    RIN 2502-AH05
    
    
    Manufactured Home Construction and Safety Standards: Metal 
    Roofing; Advance Notice of Proposed Rulemaking
    
    AGENCY: Office of the Assistant Secretary for Housing-Federal Housing 
    Commissioner, HUD.
    
    ACTION: Advance notice of proposed rulemaking.
    
    -----------------------------------------------------------------------
    
    SUMMARY: Elsewhere in today's Federal Register, the Department is 
    publishing an Interpretative Bulletin (IB) on roofing requirements for 
    manufactured homes designed to be sited in high wind areas. That IB 
    reiterates the Department's current policy as it addresses questions 
    that have arisen concerning: Whether manufacturers that design their 
    products using the wind pressures specified in a table in the 
    Manufactured Home Construction and Safety Standards must provide roof 
    sheathing under metal roofing; and the appropriateness of the testing 
    of metal roofing that has been done under current regulations. By this 
    advance notice of proposed rulemaking, the Department is providing an 
    opportunity for interested persons to make recommendations regarding 
    any changes in the table with respect to roofing requirements for 
    manufactured homes designed to be sited in high wind areas. The 
    Department will review any comments received in response to this 
    advance notice and consider them in making a determination whether to 
    revise the applicable Federal standards and regulations.
    
    DATES: Comment Due Date: July 13, 1998.
    
    ADDRESSES: Interested persons are invited to submit comments regarding 
    this advance notice of proposed rulemaking to the Regulations Division, 
    Room 10276, Office of General Counsel, Department of Housing and Urban 
    Development, 451 Seventh Street, SW, Washington, DC 20410-0500. 
    Comments should refer to the above docket number and title. A copy of 
    each comment submitted will be available for public inspection and 
    copying during regular business hours at the above address. Facsimile 
    (FAX) comments are not acceptable.
    
    FOR FURTHER INFORMATION CONTACT: David R. Williamson, Director, Office 
    of Consumer and Regulatory Affairs, Department of Housing and Urban 
    Development, 451 Seventh Street, S.W., Room 9156, Washington, DC 20410, 
    telephone: (202) 708-6401 (this is not a toll-free number). For 
    hearing- and speech-impaired persons, this number may be accessed via 
    TTY (text telephone) by calling the Federal Information Relay Service 
    at 1-800-877-8339.
    
    SUPPLEMENTARY INFORMATION: Prospective commenters should review 
    Interpretative Bulletin I-2-98 published elsewhere in today's Federal 
    Register for an explanation of the Department's interpretation of the 
    standard in 24 CFR 3280.305(c)(1)(ii)(B), which includes the Table of 
    Design Wind Pressures (``Table''), as applied to metal roofing in wind 
    zones II and III. In that IB, HUD interprets the standard to require 
    every design for manufactured housing for high wind areas to include 
    roof sheathing or alternative roof material that performs like 
    sheathing in resisting the wind pressures specified in the Table, 
    whenever the Table is used as the basis for qualifying the design.
        If the Department receives or develops information that indicates 
    the standard codified in 24 CFR 3280.305(c)(1)(ii)(B) should be 
    revised, the Department may propose revisions for further review and 
    public comment in subsequent rulemaking. To ensure that all interested 
    parties are given access to any advice the Department receives on this 
    subject, a public docket has been opened. Comments received in response 
    to this advance notice will be included in the public docket for 
    inspection and copying.
    
        Authority: 42 U.S.C. 3535(d) and 5424.
    
        Dated: April 29, 1998.
    Art Agnos,
    Acting General Deputy Assistant Secretary for Housing.
    [FR Doc. 98-12342 Filed 5-11-98; 8:45 am]
    BILLING CODE 4210-27-P
    
    
    

Document Information

Published:
05/12/1998
Department:
Housing and Urban Development Department
Entry Type:
Proposed Rule
Action:
Advance notice of proposed rulemaking.
Document Number:
98-12342
Dates:
Comment Due Date: July 13, 1998.
Pages:
26392-26392 (1 pages)
Docket Numbers:
Docket No. FR-4271-A-02
RINs:
2502-AH05: Metal Roofing for Manufactured Housing--Interpretative Bulletin (FR-4271)
RIN Links:
https://www.federalregister.gov/regulations/2502-AH05/metal-roofing-for-manufactured-housing-interpretative-bulletin-fr-4271-
PDF File:
98-12342.pdf
CFR: (1)
24 CFR 3280