[Federal Register Volume 59, Number 94 (Tuesday, May 17, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-11963]
[[Page Unknown]]
[Federal Register: May 17, 1994]
-----------------------------------------------------------------------
DEPARTMENT OF COMMERCE
International Trade Administration, Commerce
Export Trade Certificate of Review
ACTION: Notice of Issuance of an Amended Export Trade Certificate of
Review, Application No. 87-9A004.
-----------------------------------------------------------------------
SUMMARY: The Department of Commerce has issued an amendment to the
Export Trade Certificate of Review granted to AMT--The Association For
Manufacturing Technology (``AMT'') on May 19, 1987. Notice of issuance
of the Certificate was published in the Federal Register on May 22,
1987 (52 FR 19371).
FOR FURTHER INFORMATION CONTACT: W. Dawn Busby, Director, Office of
Export Trading Company Affairs, International Trade Administration,
(202) 482-5131. This is not a toll-free number.
SUPPLEMENTARY INFORMATION: Title III of the Export Trading Company Act
of 1982 (15 U.S.C. sections 4001-21) authorizes the Secretary of
Commerce to issue Export Trade Certificates of Review. The regulations
implementing title III are found at 15 CFR part 325 (1993).
The Office of Export Trading Company Affairs is issuing this notice
pursuant to 15 CFR 325.6(b), which requires the Department of Commerce
to publish a summary of a Certificate in the Federal Register. Under
section 305(a) of the Act and 15 CFR 325.11(a), any person aggrieved by
the Secretary's determination may, within 30 days of the date of this
notice, bring an action in any appropriate district court of the United
States to set aside the determination on the ground that the
determination is erroneous.
Description of Amended Certificate
Export Trade Certificate of Review No. 87-00004, was issued to
AMT--The Association of Manufacturing Technology on May 19, 1987 (52 FR
19371, May 22, 1987) and previously amended on December 11, 1987 (52 FR
48454, December 22, 1987), January 3, 1989 (54 FR 837, January 10,
1989); April 20, 1989 (54 FR 19427, May 5, 1989); May 31, 1989 (54 FR
24931, June 12, 1989); May 29, 1990 (55 FR 23576, June 11, 1990); June
7, 1991 (56 FR 28140, June 19, 1991); November 27, 1991 (56 FR 63932,
December 6, 1991); and July 20, 1992 (57 FR 33319, July 28, 1992).
AMT's Export Trade Certificate of Review has been amended to:
1. Add each of the following companies as a new ``Member'' of the
Certificate within the meaning of Sec. 325.2 (1) of the Regulations (15
CFR 325.2(1)): BHS-Torin, Inc., Farmington, Connecticut; Bertsche
Engineering Corporation, Buffalo Grove, Illinois; Bohle Machine Tools,
Inc., Farmington Hills, Michigan; Bramac Machine Tool Co., Tucson,
Arizona; Burr King Mfg. Co., Inc., South El Monte, California; Cellular
Concepts Company, Detroit, Michigan (controlling entity: U.S. Equipment
Co.); City Machine Tool & Die Company, Inc., Muncie, Indiana; D & H
Machinery, Inc. Toledo, Ohio; Darex Corporation, Ashland, Oregon;
DeVlieg-Bullard Services Group, Rockford, Illinois (controlling entity:
DeVlieg-Bullard Inc.); Feldmann, Inc., Rockford, Illinois; Industrial
Metal Products Corporation, Lansing, Michigan; Kalamazoo Saw Co.,
Kalamazoo, Michigan (controlling entity: KTS Industries, Inc.);
Komatsu-Cybermation, Medford, Massachusetts (controlling entity:
Komatsu Ltd.); Lasercut, Inc., North Bradford, Connecticut; M T R
Ravensburg, Inc., Rochester, New York; Milltronics Manufacturing
Company, Chanhassen, Minnesota; Modern Machine Tool Company, Jackson,
Michigan; Munson Machinery Company, Inc., Utica, New York; Parlec,
Inc., Fairport, New York; Rofin-Sinar, Inc., Plymouth, Michigan
(controlling entity: Siemens Corporation); Sugino Corporation,
Schaumburg, Illinois (controlling entity: Sugino Machine Ltd.); Utilase
Systems, Inc., Detroit, Michigan; Weldun Flexible Assembly Systems,
Bridgman, Michigan (controlling entity: Weldun International, Robert
Bosch Corp.); Wes-Tech, Inc., Buffalo Grove, Illinois; Herman Williams
Company, Inc., Birmingham, Alabama; and Peter Wolters of America,
Plainville, Massachusetts (Peter Wolters AG);
2. Delete each of the following companies as a ``Member'' of the
Certificate: Abrasive Engineering & Manufacturing; Alpha Machine, Inc.;
American Machine & Science (Katy Inds.); Coherent General, Inc.;
Equipment Systems Technology Company; GTE Valenite Corporation; The
Hill Acme Company; C. O. Hoffacker Company; HZ Clearing Inc.; Jacobson
Tool & Manufacturing Corp.; L & J Press Corporation; Maho Machine Tool
Corporation; Manuflex Corporation; Mega Manufacturing Inc.; Pacific
Press & Shear Inc.; Perfekt Precision Mfg. Co., Inc.; Tannewitz, Inc.;
Truxton Machinery, Inc.; Unipunch Products, Inc.; and Vulcan Tool
Company; and
3. Change the listing of the company name for each current
``Member'' cited in this paragraph to the new listing cited in this
paragraph in parenthesis as follows: American Pfauter Limited (American
Pfauter Limited Partnership); Automation & Modular Components, Inc.
(Automation & Modular Components); Barnes Drill Company (Barnes
International, Inc.); Belden Tools, Inc. (Belden Inc.); Blue Valley
Machine and Mfg. Co., Inc. (Blue Valley Machine and Mfg. Co.); Bracker
Corporation (Bracker Corporation Pittsburgh); Bryant Grinder
Corporation (Vermont-USA Machine Tool Group); Cleveland Punch & Shear
(Bath Iron Works); The Cleveland Tapping Machine Company (TCE
Corporation); Command Corporation (Command Corporation International);
Compumachine Inc. (Compumachine Incorporated); Cooper-Weymouth,
Peterson Div., Reed National Corp. (Cooper-Weymouth, Peterson);
Crankshaft Machine Company (Crankshaft Machine Group); Dake Division,
JSJ Corporation (Dake); Danly Machine Division/Connell Ltd. Partnership
(Danly-Komatsu, L.P.); Digital Electronic Automation, Inc. (DEA); Eaton
Leonard Technologies, Inc. (Eaton Leonard, Inc.); Electro Arc
Manufacturing Co., Inc. (Electro Arc Manufacturing Co.); Esterline
Corporation (Esterline Technologies); Fadal Engineering Company, Inc.
(Fadal Engineering Co., Inc.); Fairfield Machine Co., Inc. (Fairfield
Machine); Fayscott Company (Fayscott Co.); Fellows Corporation
(Vermont-USA Machine Tool Group); Genesis Systems Group Inc. (Genesis
Systems Group); George Fischer--Bohle Machine Tools Corp. (George
Fischer, Ltd.); Gleason Corporation (The Gleason Corporation); Gold
Crown Machinery, Inc. (Goldcrown Machinery); Greenfield Industries--
Geometric Division (Greenfield Industries); Hansvedt Industries, Inc.
(Hansvedt EDM Division); Harper Company (Harper Surface Finishing
Systems, Inc.); HEM, Inc. (HE&M Saw); P. R. Hoffman Machine Products
Co. (P. R. Hoffman Machine Products); Hoglund Corporation (Hoglund
Technology Corporation); Imperial Stamp & Engraving Co., Inc. (Imperial
Stamp & Engraving Company); Jarvis Corporation (Jarvis Products
Corporation); Jones & Lamson-Vermont Corp. (Vermont-USA Machine Tool
Group); Litton Industrial Automation--Machining & Assembly Sys. Div.
(Litton Industrial Automation); Lynn Electronics Corp. (Lynn
Electronics Corporation); J.M. Montgomery Mfg. Inc. (J.M. Montgomery
Manufacturing Inc.); Multipress Incorporated (Multipress Division);
National Acme Co. (The National Acme Company); National Broach &
Machine Company (National Broach & Machine Co.); The Ohio Broach
Machine Co. (The Ohio Broach & Machine Co.); Okuma Machinery, Inc.
(Okuma Inc.); Peerless (Peerless Saw Division--Wisconsin Automated
Machinery); PH Hydraulics & Automation, Inc. (P H Hydraulics and
Automation, Inc.); PMC Industries, Inc. (PMC Industries); PS Group,
Inc. (PS Group); Pope Machinery Inc. (Pope Corporation); Rank Pneumo
Inc. (Rank Taylor Hobson Inc.); Republic Lagun CNC Corporation
(Republic Lagun Machine Tool Co.); The S-P Manufacturing Corporation
(S-P/Sheffer International, Inc.); Seneca Falls Machine Tool Co., Inc.
(Seneca Falls Technology Group); Setco Industries, Inc. (Setco Sales
Company); South Bend Lathe, Inc. (South Bend Lathe Corp.); and Teledyne
Industries, Inc. (Teledyne).
A copy of the amended certificate will be kept in the International
Trade Administration's Freedom of Information Records Inspection
Facility, room 4102, U.S. Department of Commerce, 14th Street and
Constitution Avenue, NW., Washington, DC 20230.
Dated: May 10, 1994.
W. Dawn Busby,
Director, Office of Export Trading Company Affairs.
[FR Doc. 94-11963 Filed 5-16-94; 8:45 am]
BILLING CODE 3510-DR-P
