[Federal Register Volume 63, Number 96 (Tuesday, May 19, 1998)]
[Notices]
[Pages 27617-27618]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 98-13251]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. NHTSA-98-3852]
Notice of Receipt of Petition for Decision That Nonconforming
1997 Porsche Boxster Passenger Cars Are Eligible for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of receipt of petition for decision that nonconforming
1997 Porsche Boxster passenger cars are eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt by the National Highway Traffic
Safety Administration (NHTSA) of a petition for a decision that a 1997
Porsche Boxster that was not originally manufactured to comply with all
applicable Federal motor vehicle safety standards is eligible for
importation into the United States because (1) it is substantially
similar to a vehicle that was originally manufactured for importation
into and sale in the United States and that was certified by its
manufacturer as complying with the safety standards, and (2) it is
capable of being readily altered to conform to the standards.
DATES: The closing date for comments on the petition is June 18, 1998.
ADDRESSES: Comments should refer to the docket number and notice
number, and be submitted to: Docket Management, Room PL-401, 400
Seventh St., SW, Washington, DC 20590. [Docket hours are from 10 am to
5 pm].
FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle
Safety Compliance, NHTSA (202-366-5306).
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. 30141(a)(1)(A), a motor vehicle that was not
originally manufactured to conform to all applicable Federal motor
vehicle safety standards shall be refused admission into the United
States unless NHTSA has decided that the motor vehicle is substantially
similar to a motor vehicle originally manufactured for importation into
and sale in the United States, certified under 49 U.S.C. 30115, and of
the same model year as the model of the motor vehicle to be compared,
and is capable of being readily altered to conform to all applicable
Federal motor vehicle safety standards.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then
[[Page 27618]]
publishes this decision in the Federal Register.
Wallace Environmental Testing Laboratories, Inc. of Houston, Texas
(``Wallace'') (Registered Importer 90-005) has petitioned NHTSA to
decide whether 1997 Porsche Boxster passenger cars are eligible for
importation into the United States. The vehicle which Wallace believes
is substantially similar is the 1997 Porsche Boxster that was
manufactured for importation into, and sale in, the United States and
certified by its manufacturer, as conforming to all applicable Federal
motor vehicle safety standards.
The petitioner claims that it carefully compared the non-U.S.
certified 1997 Porsche Boxster to its U.S. certified counterpart, and
found the two vehicles to be substantially similar with respect to
compliance with most Federal motor vehicle safety standards.
Wallace submitted information with its petition intended to
demonstrate that the non-U.S. certified 1997 Porsche Boxster, as
originally manufactured, conforms to many Federal motor vehicle safety
standards in the same manner as its U.S. certified counterpart, or is
capable of being readily altered to conform to those standards.
Specifically, the petitioner claims that the non-U.S. certified
1997 Porsche Boxster is identical to its U.S. certified counterpart
with respect to compliance with Standards Nos. 102 Transmission Shift
Lever Sequence * * *, 103 Defrosting and Defogging Systems, 104
Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems,
106 Brake Hoses, 109 New Pneumatic Tires, 113 Hood Latch Systems,
116 Brake Fluid, 124 Accelerator Control Systems, 201 Occupant
Protection in Interior Impact, 202 Head Restraints, 204 Steering
Control Rearward Displacement, 205 Glazing Materials, 206 Door Locks
and Door Retention Components, 207 Seating Systems, 209 Seat Belt
Assemblies, 210 Seat Belt Assembly Anchorages, 212 Side Impact
Protection, 216 Roof Crush Resistance, 219 Windshield Zone Intrusion,
and 302 Flammability of Interior Materials.
Petitioner also contends that the vehicle is capable of being
readily altered to meet the following standards, in the manner
indicated:
Standard No. 101 Controls and Displays: (a) Substitution of a lens
marked ``Brake'' for a lens with an ECE symbol on the brake failure
indicator lamp; (b) replacement of the speedometer/odometer with one
calibrated in miles per hour.
Standard No. 108 Lamps, Reflective Devices and Associated
Equipment: Installation of U.S.-model taillamp assemblies and front
sidemarkers. The petitioner states that the vehicle is equipped with
conforming headlights, turn signal lenses, and a high mounted stoplamp.
Standard No. 110 Tire Selection and Rims: Installation of a tire
information placard.
Standard No. 111 Rearview Mirror: Inscription of the required
warning statement on the passenger side rearview mirror.
Standard No. 114 Theft Protection: Installation of a warning
buzzer in the steering lock assembly. The petitioner states that the
vehicle is already equipped with a warning buzzer microswitch.
Standard No. 118 Power Window Systems: Rewiring of the power
window system so that the window transport is inoperative when the
ignition is switched off.
Standard No. 208 Occupant Crash Protection: (a) Installation of a
safety belt warning system through replacement of the driver's seat
belt latch and the addition of a seat belt warning buzzer; (b)
replacement of the driver's and passenger's side air bags and knee
bolsters with U.S.-model components on vehicles that are not already so
equipped. The petitioner states that the vehicle is equipped with Type
II seat belts at both front designated seating positions. The
petitioner notes that the vehicle is a 2-seater.
Standard No. 301 Fuel System Integrity: Installation of a rollover
valve in the fuel tank vent line between the fuel tank and the
evaporative emissions collection canister.
Additionally, the petitioner states that bumper shocks and bumper
pads must be added to the rear bumper of the non-U.S. certified 1997
Porsche Boxster for it to comply with the Bumper Standard found in 49
CFR part 581.
The petitioner also states that a vehicle identification number
plate must be affixed to the vehicle to meet the requirements of 49 CFR
part 565.
The petitioner finally states that all vehicles will be inspected
prior to importation to assure compliance with the Theft Prevention
Standard found in 49 CFR part 541.
Interested persons are invited to submit comments on the petition
described above. Comments should refer to the docket number and be
submitted to: Docket Management, Room PL-401, 400 Seventh St., SW,
Washington, DC 20590. [Docket hours are from 10 am to 5 pm]. It is
requested but not required that 10 copies be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before and after
that date. To the extent possible, comments filed after the closing
date will also be considered. Notice of final action on the petition
will be published in the Federal Register pursuant to the authority
indicated below.
Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued on: May 14, 1998.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 98-13251 Filed 5-18-98; 8:45 am]
BILLING CODE: 4910-59-P
