2024-09355. Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes

AGENCY:

Federal Aviation Administration (FAA), DOT.

ACTION:

Final rule.

SUMMARY:

The FAA is adopting a new airworthiness directive (AD) for certain ATR—GIE Avions de Transport Régional Model ATR42 and ATR72 airplanes. This AD was prompted by a report of an electrical contactor that failed with contacts in the intermediate position, causing the airplane to lose power to multiple electrical systems. This AD requires repetitive operational tests of the affected part, and, depending on findings, accomplishment of applicable corrective action, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

DATES:

This AD is effective June 6, 2024.

The Director of the Federal Register approved the incorporation by reference of a certain publication listed in this AD as of June 6, 2024.

ADDRESSES:

AD Docket: You may examine the AD docket at regulations.gov under Docket No. FAA-2024-0222; or in person at Docket Operations between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this final rule, the mandatory continuing airworthiness information (MCAI), any comments received, and other information. The address for Docket Operations is U.S. Department of Transportation, Docket Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New Jersey Avenue SE, Washington, DC 20590.

Material Incorporated by Reference:

• For EASA material, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; website easa.europa.eu. You may find this material on the EASA website at ad.easa.europa.eu.

• You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195. It is also available in the AD docket at regulations.gov under Docket No. FAA-2024-0222.

FOR FURTHER INFORMATION CONTACT:

Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone: [phone]; email: [e-mail].

SUPPLEMENTARY INFORMATION:

Background

The FAA issued a notice of proposed rulemaking (NPRM) to amend 14 CFR part 39 by adding an AD that would apply to ATR—GIE Avions de Transport Régional Model ATR42-200, -300, -320, and -500; and ATR72-101, -102, -201, -202, -211, -212, and -212A airplanes, except those on which ATR modification (mod) 05948 has been embodied in production. The NPRM published in the Federal Register on February 7, 2024 (89 FR 8361). The NPRM was prompted by AD 2023-0181, dated October 13, 2023 (EASA AD 2023-0181) (also referred to as the MCAI), issued by EASA, which is the Technical Agent for the Member States of the European Union. The MCAI states that one event of electrical failure has been reported on a pre-mod 05948 airplane, possibly caused by a functional item number (FIN) 1PA contactor failing with contacts in the intermediate position.

In the NPRM, the FAA proposed to require repetitive operational tests of the affected part, and, depending on findings, accomplishment of applicable corrective action, as specified in EASA AD 2023-0181. The FAA is issuing this AD to address an electrical failure. This condition, if not addressed, could lead to temporary loss of the direct current emergency electrical network and loss of control of the airplane.

You may examine the MCAI in the AD docket at regulations.gov under Docket No. FAA-2024-0222.

Discussion of Final Airworthiness Directive

Comments

The FAA received comments from the Air Line Pilots Association, International, and an anonymous individual, both of whom supported the NPRM without change.

Conclusion

This product has been approved by the aviation authority of another country and is approved for operation in the United States. Pursuant to the FAA's bilateral agreement with this State of Design Authority, it has notified the FAA of the unsafe condition described in the MCAI referenced above. The FAA reviewed the relevant data, considered the comments received, and determined that air safety requires adopting this AD as proposed. Accordingly, the FAA is issuing this AD to address the unsafe condition on this product. Except for minor editorial changes this AD is adopted as proposed in the NPRM. None of the changes will increase the economic burden on any operator.

Related Service Information Under 1 CFR Part 51

EASA AD 2023-0181 specifies procedures for repetitive operational tests on the contactor 1PA, and, depending on findings, accomplishment of applicable corrective actions. Corrective actions include replacement of the contactor. This material is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section.

Costs of Compliance

The FAA estimates that this AD affects 49 airplanes of U.S. registry. The FAA estimates the following costs to comply with this AD:

Estimated Costs for Required Actions

Labor cost	Parts cost	Cost per product	Cost on U.S. operators
1 work-hour × $85 per hour = $85	$0	$85	$4,165 per test.

The FAA estimates the following costs to do any necessary on-condition actions that would be required based on the results of any required actions. The FAA has no way of determining the number of aircraft that might need this on-condition action:

Estimated Costs of On-Condition Actions

Labor cost	Parts cost	Cost per product
2 work-hours × $85 per hour = $170	$1,625	$1,795

Authority for This Rulemaking

Title 49 of the United States Code specifies the FAA's authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency's authority.

The FAA is issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: General requirements. Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action.

Regulatory Findings

This AD will not have federalism implications under Executive Order 13132. This AD will not have a substantial direct effect on the States, on the relationship between the national government and the States, or on the distribution of power and responsibilities among the various levels of government.

For the reasons discussed above, I certify that this AD:

(1) Is not a “significant regulatory action” under Executive Order 12866,

(2) Will not affect intrastate aviation in Alaska, and

(3) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

• Air transportation
• Aircraft
• Aviation safety
• Incorporation by reference
• Safety

The Amendment

Accordingly, under the authority delegated to me by the Administrator, the FAA amends 14 CFR part 39 as follows:

PART 39—AIRWORTHINESS DIRECTIVES

1. The authority citation for part 39 continues to read as follows:

Authority: 49 U.S.C. 106(g), 40113, 44701.

§ 39.13

[Amended]

2. The FAA amends § 39.13 by adding the following new airworthiness directive:

2024-08-02 ATR—GIE Avions de Transport Régional: Amendment 39-22735; Docket No. FAA-2024-0222; Project Identifier MCAI-2023-01072-T.

(a) Effective Date

This airworthiness directive (AD) is effective June 6, 2024.

(b) Affected ADs

None.

(c) Applicability

This AD applies to the ATR—GIE Avions de Transport Régional airplanes specified in paragraphs (c)(1) and (2) of this AD, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2023-0181, dated October 13, 2023 (EASA AD 2023-0181).

(1) Model ATR42-200, -300, -320, and -500 airplanes.

(2) Model ATR72-101, -102, -201, -202, -211, -212, and -212A airplanes.

(d) Subject

Air Transport Association (ATA) of America Code 24, Electrical power.

(e) Unsafe Condition

This AD was prompted by a report of an electrical contactor that failed with contacts in the intermediate position, causing the airplane to lose power to multiple electrical systems. The FAA is issuing this AD to address an electrical failure. The unsafe condition, if not addressed, could result in temporary loss of the direct current emergency electrical network and loss of control of the airplane.

(f) Compliance

Comply with this AD within the compliance times specified, unless already done.

(g) Requirements

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2023-0181.

(h) Exceptions to EASA AD 2023-0181

(1) Where EASA AD 2023-0181 refers to its effective date, this AD requires using the effective date of this AD.

(2) This AD does not adopt the “Remarks” section of EASA AD 2023-0181.

(i) Additional AD Provisions

The following provisions also apply to this AD:

(1) Alternative Methods of Compliance (AMOCs): The Manager, International Validation Branch, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or responsible Flight Standards Office, as appropriate. If sending information directly to the manager of the International Validation Branch, mail it to the address identified in paragraph (j) of this AD. Information may be emailed to: [e-mail]. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the responsible Flight Standards Office.

(2) Contacting the Manufacturer: For any requirement in this AD to obtain instructions from a manufacturer, the instructions must be accomplished using a method approved by the Manager, International Validation Branch, FAA; or EASA; or ATR—GIE Avions de Transport Régional's EASA Design Organization Approval (DOA). If approved by the DOA, the approval must include the DOA-authorized signature.

(j) Additional Information

For more information about this AD, contact Shahram Daneshmandi, Aviation Safety Engineer, FAA, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone: [phone]; email: [e-mail].

(k) Material Incorporated by Reference

(1) The Director of the Federal Register approved the incorporation by reference (IBR) of the service information listed in this paragraph under 5 U.S.C. 552(a) and 1 CFR part 51.

(2) You must use this service information as applicable to do the actions required by this AD, unless this AD specifies otherwise.

(i) European Union Aviation Safety Agency (EASA) AD 2023-0181, dated October 13, 2023.

(ii) [Reserved]

(3) For EASA AD 2023-0181, contact EASA, Konrad-Adenauer-Ufer 3, 50668 Cologne, Germany; telephone [phone]; email [e-mail]; website easa.europa.eu. You may find this EASA AD on the EASA website at ad.easa.europa.eu.

(4) You may view this material at the FAA, Airworthiness Products Section, Operational Safety Branch, 2200 South 216th St., Des Moines, WA. For information on the availability of this material at the FAA, call 206-231-3195.

(5) You may view this material at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, visit www.archives.gov/​federal-register/​cfr/​ibr-locations, or email [e-mail].

Issued on April 12, 2024.

Victor Wicklund,

Deputy Director, Compliance & Airworthiness Division, Aircraft Certification Service.