[Federal Register Volume 62, Number 99 (Thursday, May 22, 1997)]
[Notices]
[Pages 28066-28068]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 97-13416]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF LABOR
Occupational Safety and Health Administration
[Docket No. NRTL-2-93]
Entela, Inc.; Notice of Final Decision
AGENCY: Occupational Safety and Health Administration, Department of
Labor.
ACTION: Notice of expansion of recognition as a Nationally Testing
Laboratory.
-----------------------------------------------------------------------
SUMMARY: This notice announces the Agency's final decision on the
Entela, Inc. application for expansion of its recognition as a
Nationally Recognized Testing Laboratory (NRTL) under 29 CFR 1910.7.
FOR FURTHER INFORMATION CONTACT: Office of Variance Determination, NRTL
Recognition Program, Occupational Safety and Health Administration,
U.S. Department of Labor, 200 Constitution Avenue, N.W., Room N3653,
Washington, D.C. 20210.
SUPPLEMENTARY INFORMATION:
Notice of Final Decision
Entela, Inc. (ENT) previously made application pursuant to 29 CFR
1910.7 for recognition as a Nationally Recognized Testing Laboratory
(see 59 FR 10180, 3/3/94), and was so recognized (see 59 FR 37997, 7/
26/94). ENT applied for expansion of its current recognition as a
Nationally Recognized Testing Laboratory (NRTL) for equipment or
materials, programs and procedures, and inclusion of its Taiwan
facility, pursuant to 29 CFR 1910.7, which was published in the Federal
Register (62 FR 8041, 2/21/97). No comments were received concerning
this request for expansion.
Notice is hereby given that ENT's recognition as a Nationally
Recognized Testing Laboratory has been expanded to include the 57 test
standards (equipment and materials) and the programs and procedures
listed below, and also Entela's Taiwan facility with specific
limitations.
Copies of all pertinent documents (Docket No. NRTL-2-93) are
available for inspection and duplication at the Docket Office, Room N-
2634, Occupational Safety and Health Administration, U.S. Department of
Labor, 200 Constitution Avenue, N.W., Washington, D.C. 20210.
The addresses of the laboratories covered by this application are:
Entela, Inc., 3033 Madison, S.E., Grand Rapids, Michigan 49548 and
Entela Taiwan Laboratories, 3F No. 260 262 Wen, Lin North Road, Pei
Tou, Taipei, Taiwan.
[[Page 28067]]
Final Decision and Order
Based upon the facts found in the complete application file,
including details of necessary test equipment, procedures, and special
apparatus or facilities needed; adequacy of the staff, the application,
amendments, and documentation submitted by the applicant; the OSHA
staff finding including the original and the November 26, 1996 On-Site
Review Reports of the Grand Rapids facility, and the ``Survey Report''
of the Taiwan facility, dated February 24, 1994; and the evaluation of
the current requests, OSHA finds that Entela, Inc., has met the
requirements of 29 CFR 1910.7 for expansion of its present recognition
to test and clarify certain equipment or materials, to utilize specific
programs and procedures, and to utilize the Entela Taiwan Laboratories
facility.
Pursuant to the authority in 29 CFR 1910.7, ENT's recognitions is
hereby expanded to include (1) The 57 additional test standards
(product categories), (2) the eight programs and procedures cited
below, and (3) Entela Taiwan Laboratories, all subject to the
conditions listed below. This recognition is limited to equipment or
materials which, under 29 CFR part 1910, require testing, listing,
labeling, approval, acceptance, or certification by a Nationally
Recognized Testing Laboratory. This recognition is limited to the use
of the following 57 additional test standards for the testing and
certification of equipment or materials included within the scope of
these standards.
Expansion of Recognition--Test Standards
ENT has stated that these standards are used to test equipment or
materials which can be used in environments under OSHA's jurisdiction,
and OSHA has determined that they are appropriate within the meaning of
29 CFR 1910.7(c).
ANSI/UL 22--Amusement and Gaming Machines
UL 122--Photographic Equipment
ANSI/UL 244A--Solid State Controls for Appliances
ANSI/UL 353--Limit Controls
UL 355--Cord Reels
UL 429--Electrically Operated Valves
ANSI/UL 467--Grounding and Bonding Equipment
ANSI/UL 499--Electric Heating Appliances
ANSI/UL 696--Electric Toys
UL 745-1--Portable Electric Tools
UL 745-2-1--Drills
UL 745-2-2--Screwdrivers and Impact Wrenches
UL 745-2-3--Grinders, Polishers and Disk-type Sanders
UL 745-2-4--Sanders
UL 745-2-5--Circular Saws and Circular Knives
UL 745-2-6--Hammers
UL 745-2-8--Shears and Nibblers
UL 745-2-9--Tappers
UL 745-2-11--Reciprocating Saws
UL 745-2-12--Concrete Vibrators
UL 745-2-14--Planers
UL 745-2-17--Routers and Trimmers
UL 745-2-30--Staplers
UL 745-2-31--Diamond Core Drills
UL 745-2-32--Magnetic Drill Press
UL 745-2-33--Portable Bandsaws
UL 745-2-34--Strapping Tools
UL 745-2-35--Drain Cleaners
UL 745-2-36--Hand Motor Tools
UL 745-2-37--Plate Joiners
UL 749--Household Dishwashers
UL 763--Motor Operated Commercial Food Preparing Machines
ANSI/UL 826--Household Electric Clocks
ANSI/UL 859--Household Electric Personal Grooming Appliances
ANSI/UL 917--Clock Operated Switches
ANSI/UL 921--Commercial Electric Dishwashers
UL 982--Motor Operated Household Food Preparing Machines
UL 987--Stationary and Fixed Electric Tools
UL 1018--Electric Aquarium Equipment
UL 1028--Hair Clipping and Shaving Appliances
ANSI/UL 1083--Household Electric Skillets and Frying Type Appliances
UL 1086--Household Trash Compactors
UL 1206--Electric Commercial Clothes Washing Machines
ANSI/UL 1262--Laboratory Equipment
ANSI/UL 1310--Class 2 Power Units
ANSI/UL 1447--Electric Lawn Mowers
ANSI/UL 1448--Electric Hedge Trimmers
ANSI/UL 1555--Electric Coin Operated Clothes Washing Equipment
ANSI/UL 1556--Electric Coin Operated Clothes Drying Equipment
UL 1574--Track Lighting Systems
ANSI/UL 1585--Class 2 and Class 3 Transformers
ANSI/UL 1594--Sewing and Cutting Machines
ANSI/UL 1727--Commercial Electric Personal Grooming Appliances
UL 1786--Nightlights
UL 1838--Low Voltage Landscape Lighting Systems
UL 3101-1--Electric Equipment for Laboratory Use, Part 1, General
UL 3111-1--Electric Controls for Household and Similar Use, Part 1,
General
Expansion of Recognition--Programs and Procedures
1. Acceptance of testing data from independent organizations, other
than NRTLs.
2. Acceptance of product evaluations from independent
organizations, other than NRTLs.
3. Acceptance of witnessed testing data.
4. Acceptance of testing data from non-independent organizations.
5. Acceptance of evaluation data from non-independent organizations
(requiring NRTL review prior to marketing).
6. Acceptance of product certification following minor
modifications by the client.
7. Acceptance of product evaluations from organizations that
function as part of the International Electrotechnical Commission
Certification Body (IEC-CB) Scheme.
8. Acceptance of services other than testing or evaluation
performed by subcontractors or agents.
Expansion of Recognition--Facilities
The following limitations will apply to the recognition of the
Taiwan facility:
a. The Taiwan facility shall be limited to carrying out minor
mechanical and electrical testing of instruments and small appliances.
b. Performance of inspections shall be limited to Entela personnel.
Entela, Inc. must also abide by the following conditions of the
expansion of its recognition, in addition to those already required by
29 CFR 1910.7:
The Occupational Safety and Health Administration shall be allowed
access to ENT's facility and records for purposes of ascertaining
continuing compliance with the terms of its recognition and to
investigate as OSHA deems necessary,
If ENT has reason to doubt the efficacy of any test standard it is
using under this program, it shall promptly inform the test standard
developing organizations of this fact and provide that organization
with appropriate relevant information upon which its concerns are
based;
ENT shall not engage in or permit others to engage in any
misrepresentation of the scope or conditions of its recognition. As
part of this condition, ENT agrees that it will allow no representation
that it is either a recognized or an accredited Nationally Recognized
Testing Laboratory (NRTL) without clearly indicating the specific
equipment or material to which this recognition is tied, or that its
recognition is limited to certain products;
[[Page 28068]]
ENT shall inform OSHA as soon as possible, in writing, of any
change of ownership or key personnel, including details;
ENT will continue to meet the requirements for recognition in all
areas where it has been recognized; and
ENT will always cooperate with OSHA to assure compliance with the
spirit as well as the letter of its recognition and 29 CFR 1910.7.
EFFECTIVE DATE: This renewal and recognition will become effective on
May 22, 1997 and will be valid until July 26, 1999, (a period of five
years from the date of the original recognition), unless terminated
prior to that date, in accordance with 29 CFR 1910.7.
Signed at Washington, D.C. this 15th day of May, 1997.
Greg Watchman,
Acting Assistant Secretary.
[FR Doc. 97-13416 Filed 5-21-97; 8:45 am]
BILLING CODE 4510-26-M
