[Federal Register Volume 62, Number 100 (Friday, May 23, 1997)]
[Notices]
[Pages 28530-28531]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 97-13637]
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
National Highway Traffic Safety Administration
[Docket No. 97-034; Notice 1]
Receipt of Petition for Decision that Nonconforming 1988 Jaguar
XJ6 Sovereign Passenger Cars Are Eligible for Importation
AGENCY: National Highway Traffic Safety Administration, DOT.
ACTION: Notice of receipt of petition for decision that nonconforming
1988 Jaguar XJ6 Sovereign passenger cars are eligible for importation.
-----------------------------------------------------------------------
SUMMARY: This notice announces receipt by the National Highway Traffic
Safety Administration (NHTSA) of a petition for a decision that a 1988
Jaguar XJ6 Sovereign that was not originally manufactured to comply
with all applicable Federal motor vehicle safety standards is eligible
for importation into the United States because (1) It is substantially
similar to a vehicle that was originally manufactured for importation
into and sale in the United States and that was certified by its
manufacturer as complying with the safety standards, and (2) it is
capable of being readily altered to conform to the standards.
DATES: The closing date for comments on the petition is June 23, 1997.
ADDRESSES: Comments should refer to the docket number and notice
number, and be submitted to: Docket Section, Room 5109, National
Highway Traffic Safety Administration, 400 Seventh St., SW, Washington,
DC 20590. [Docket hours are from 9:30 am to 4 pm]
FOR FURTHER INFORMATION CONTACT: George Entwistle, Office of Vehicle
Safety Compliance, NHTSA (202-366-5306).
[[Page 28531]]
SUPPLEMENTARY INFORMATION:
Background
Under 49 U.S.C. Sec. 30141(a)(1)(A), a motor vehicle that was not
originally manufactured to conform to all applicable Federal motor
vehicle safety standards shall be refused admission into the United
States unless NHTSA has decided that the motor vehicle is substantially
similar to a motor vehicle originally manufactured for importation into
and sale in the United States, certified under 49 U.S.C. Sec. 30115,
and of the same model year as the model of the motor vehicle to be
compared, and is capable of being readily altered to conform to all
applicable Federal motor vehicle safety standards.
Petitions for eligibility decisions may be submitted by either
manufacturers or importers who have registered with NHTSA pursuant to
49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice
in the Federal Register of each petition that it receives, and affords
interested persons an opportunity to comment on the petition. At the
close of the comment period, NHTSA decides, on the basis of the
petition and any comments that it has received, whether the vehicle is
eligible for importation. The agency then publishes this decision in
the Federal Register.
J.K. Motors of Kingsville, Maryland (``J.K.'') (Registered Importer
90-006) has petitioned NHTSA to decide whether 1988 Jaguar XJ6
Sovereign passenger cars are eligible for importation into the United
States. The vehicle which J.K. believes is substantially similar is the
1988 Jaguar XJ6 Sovereign that was manufactured for importation into,
and sale in, the United States and certified by its manufacturer as
conforming to all applicable Federal motor vehicle safety standards.
The petitioner claims that it carefully compared the non-U.S.
certified 1988 Jaguar XJ6 Sovereign to its U.S. certified counterpart,
and found the two vehicles to be substantially similar with respect to
compliance with most Federal motor vehicle safety standards.
J.K. submitted information with its petition intended to
demonstrate that the non-U.S. certified 1988 Jaguar XJ6 Sovereign, as
originally manufactured, conforms to many Federal motor vehicle safety
standards in the same manner as its U.S. certified counterpart, or is
capable of being readily altered to conform to those standards.
Specifically, the petitioner claims that the non-U.S. certified
1988 Jaguar XJ6 Sovereign is identical to its U.S. certified
counterpart with respect to compliance with Standard Nos. 102
Transmission Shift Lever Sequence . . . ., 103 Defrosting and Defogging
Systems, 104 Windshield Wiping and Washing Systems, 105 Hydraulic Brake
Systems, 106 Brake Hoses, 109 New Pneumatic Tires, 113 Hood Latch
Systems, 116 Brake Fluid, 124 Accelerator Control Systems, 201 Occupant
Protection in Interior Impact, 202 Head Restraints, 204 Steering
Control Rearward Displacement, 205 Glazing Materials, 206 Door Locks
and Door Retention Components, 207 Seating Systems, 209 Seat Belt
Assemblies, 210 Seat Belt Assembly Anchorages, 212 Windshield
Retention, 214 Side Impact Protection, 216 Roof Crush Resistance, 219
Windshield Zone Intrusion, 301 Fuel System Integrity, and 302
Flammability of Interior Materials.
Additionally, the petitioner states that the non-U.S. certified
1988 Jaguar XJ6 Sovereign complies with the Bumper Standard found in 49
CFR part 581.
Petitioner also contends that the vehicle is capable of being
readily altered to meet the following standards, in the manner
indicated:
Standard No. 101 Controls and Displays: (a) Substitution of a lens
marked ``Brake'' for a lens with a noncomplying symbol on the brake
failure indicator lamp; (b) replacement of the speedometer with a unit
calibrated in miles per hour.
Standard No. 108 Lamps, Reflective Devices and Associated
Equipment: (a) Installation of U.S.-model sealed headlamps and front
sidemarker lights; (b) installation of U.S.-model taillamp assemblies
which incorporate rear sidemarker lights; (c) installation of a U.S.-
model high mounted stop lamp.
Standard No. 110 Tire Selection and Rims: installation of a tire
information placard.
Standard No. 111 Rearview Mirror: replacement of the passenger side
rearview mirror with a U.S.-model component.
Standard No. 114 Theft Protection: installation of a warning buzzer
microswitch in the steering lock assembly and a warning buzzer.
Standard No. 118 Power Window Systems: installation of a relay in
the power window system so that the window transport is inoperative
when the ignition is switched off.
Standard No. 208 Occupant Crash Protection: installation of a seat
belt warning buzzer, wired to the seat belt latch. The petitioner
states that the non-U.S. certified 1988 Jaguar XJ6 Sovereign is
equipped with seat belts and warning lamps identical to those found on
its U.S.-certified counterpart.
The petitioner also states that a vehicle identification number
plate must be affixed to the vehicle near the left windshield post and
a reference and certification label must be affixed in the left front
door post area to meet the requirements of 49 CFR part 565.
Interested persons are invited to submit comments on the petition
described above. Comments should refer to the docket number and be
submitted to: Docket Section, National Highway Traffic Safety
Administration, Room 5109, 400 Seventh Street, S.W., Washington, DC
20590. It is requested but not required that 10 copies be submitted.
All comments received before the close of business on the closing
date indicated above will be considered, and will be available for
examination in the docket at the above address both before and after
that date. To the extent possible, comments filed after the closing
date will also be considered. Notice of final action on the petition
will be published in the Federal Register pursuant to the authority
indicated below.
Authority: 49 U.S.C. 30141(a)(1)(A) and (b)(1); 49 CFR 593.8;
delegations of authority at 49 CFR 1.50 and 501.8.
Issued on: May 20, 1997.
Marilynne Jacobs,
Director, Office of Vehicle Safety Compliance.
[FR Doc. 97-13637 Filed 5-22-97; 8:45 am]
BILLING CODE 4910-59-P
