94-12684. Receipt of Petition for Determination That Nonconforming 1993 Jaguar Sovereign Passenger Cars Are Eligible for Importation  

  • [Federal Register Volume 59, Number 100 (Wednesday, May 25, 1994)]
    [Unknown Section]
    [Page 0]
    From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
    [FR Doc No: 94-12684]
    
    
    [[Page Unknown]]
    
    [Federal Register: May 25, 1994]
    
    
    -----------------------------------------------------------------------
    
    DEPARTMENT OF TRANSPORTATION
    [Docket No. 94-42; Notice 1]
    
     
    
    Receipt of Petition for Determination That Nonconforming 1993 
    Jaguar Sovereign Passenger Cars Are Eligible for Importation
    
    AGENCY: National Highway Traffic Safety Administration, DOT.
    
    ACTION: Notice of receipt of petition for determination that 
    nonconforming 1993 Jaguar Sovereign passenger cars are eligible for 
    importation.
    
    -----------------------------------------------------------------------
    
    SUMMARY: This notice announces receipt by the National Highway Traffic 
    Safety Administration (NHTSA) of a petition for a determination that a 
    1993 Jaguar Sovereign that was not originally manufactured to comply 
    with all applicable Federal motor vehicle safety standards is eligible 
    for importation into the United States because (1) it is substantially 
    similar to a vehicle that was originally manufactured for importation 
    into and sale in the United States and that was certified by its 
    manufacturer as complying with the safety standards, and (2) it is 
    capable of being readily modified to conform to the standards.
    
    DATES: The closing date for comments on the petition is June 24, 1994.
    
    ADDRESSES: Comments should refer to the docket number and notice 
    number, and be submitted to: Docket Section, room 5109, National 
    Highway Traffic Safety Administration, 400 Seventh St., SW., 
    Washington, DC 20590. [Docket hours are from 9:30 am to 4 pm].
    
    FOR FURTHER INFORMATION CONTACT:
    Ted Bayler, Office of Vehicle Safety Compliance, NHTSA (202-366-5306).
    
    SUPPLEMENTARY INFORMATION: 
    
    Background
    
        Under section 108(c)(3)(A)(i) of the National Traffic and Motor 
    Vehicle Safety Act (the Act), 15 U.S.C. 1397(c)(3)(A)(i), a motor 
    vehicle that was not originally manufactured to conform to all 
    applicable Federal motor vehicle safety standards shall be refused 
    admission into the United States on and after January 31, 1990, unless 
    NHTSA has determined that the motor vehicle is substantially similar to 
    a motor vehicle originally manufactured for importation into and sale 
    in the United States, certified under section 114 of the Act, and of 
    the same model year as the model of the motor vehicle to be compared, 
    and is capable of being readily modified to conform to all applicable 
    Federal motor vehicle safety standards.
        Petitions for eligibility determinations may be submitted by either 
    manufacturers or importers who have registered with NHTSA pursuant to 
    49 CFR part 592. As specified in 49 CFR 593.7, NHTSA publishes notice 
    in the Federal Register of each petition that it receives, and affords 
    interested persons an opportunity to comment on the petition. At the 
    close of the comment period, NHTSA determines, on the basis of the 
    petition and any comments that it has received, whether the vehicle is 
    eligible for importation. The agency then publishes this determination 
    in the Federal Register.
        J.K. Motors, Inc. of Kingsville, Maryland (``J.K.'') (Registered 
    Importer R-90-006) has petitioned NHTSA to determine whether 1993 
    Jaguar Sovereign passenger cars that were not originally manufactured 
    to comply with all applicable Federal motor vehicle safety standards 
    are eligible for importation into the United States. The vehicle which 
    J.K. believes is substantially similar is the 1993 Jaguar Sovereign 
    manufactured for importation into and sale in the United States and 
    certified by its manufacturer, Jaguar Cars Ltd., as conforming to all 
    applicable Federal motor vehicle safety standards
        The petitioner states that it has carefully compared the non-U.S.-
    certified version of the Jaguar Sovereign to its U.S.-certified 
    counterpart, and found the two vehicles to be substantially similar 
    with respect to most applicable Federal motor vehicle safety standards.
        J.K. submitted information with its petition intended to 
    demonstrate that the non-U.S.-certified version of the 1993 Jaguar 
    Sovereign, as originally manufactured, conforms to many Federal motor 
    vehicle safety standards in the same manner as its U.S.-certified 
    counterpart, or is capable of being readily modified to conform to 
    those standards.
        Specifically, the petitioner claims that the non-U.S.-certified 
    1993 Jaguar Sovereign is identical to its U.S.-certified counterpart 
    with respect to compliance with Standard Nos. 102 Transmission Shift 
    Lever Sequence * * *, 103 Defrosting and Defogging Systems, 104 
    Windshield Wiping and Washing Systems, 105 Hydraulic Brake Systems, 106 
    Brake Hoses, 107 Reflecting Surfaces, 109 New Pneumatic Tires, 113 Hood 
    Latch Systems, 116 Brake Fluid, 124 Accelerator Control Systems, 201 
    Occupant Protection in Interior Impact, 202 Head Restraints, 203 Impact 
    Protection for the Driver From the Steering Control System, 204 
    Steering Control Rearward Displacement, 205 Glazing Materials, 206 Door 
    Locks and Door Retention Components; 207 Seating Systems 209 Seat Belt 
    Assemblies, 210 Seat Belt Assembly Anchorages, 211 Wheel Nuts, Wheel 
    Discs and Hubcaps, 212 Windshield Retention, 214 Side Door Strength, 
    216 Roof Crush Resistance, 219 Windshield Zone Intrusion, 301 Fuel 
    System Integrity, and 302 Flammability of Interior Materials.
        Petitioner also contends that the vehicle is capable of being 
    readily modified to meet the following standards, in the manner 
    indicated:
        Standard No. 101 Controls and Displays: (a) Substitution of a lens 
    marked ``Brake'' for a lens with an ECE symbol on the brake failure 
    indicator lamp; (b) recalibration of the speedometer/odometer from 
    kilometers to miles per hour.
        Standard No. 108 Lamps, Reflective Devices and Associated 
    Equipment: (a) Installation of U.S.-model headlamp assemblies which 
    incorporate sealed beam headlamps and front sidemarkers; (b) 
    installation of U.S.-model taillamp assemblies which incorporate rear 
    sidemarkers; (c) installation of a high mounted stop lamp; (d) 
    replacement of the buld failure modules for the about lighting systems 
    with U.S.-model components.
        Standard No. 110 Tire Selection and Rims: Installation of a tire 
    information placard.
        Standard No. 111 Rearview Mirrors: Replacement of the passenger 
    side rearview, which is convex, but lacks the required warning 
    statement.
        Standard No. 114 Theft Protection: Installation of a microswitch 
    and warning buzzer in the steering lock electrical circuit.
        Standard No. 115 Vehicle Identification Number: Installation of a 
    VIN plate that can be read from outside the left windshield pillar, and 
    a VIN reference label on the edge of the door or latch post nearest the 
    driver.
        Standard No. 118 Power-Operated Window Systems: Installation of a 
    relay in the power window system so that the window transport is 
    inoperative when the ignition is turned off.
        Standard No. 208 Occupant Crash Protection: (a) Installation of a 
    seat belt warning buzzer wired to the driver's seat belt latch; (b) 
    replacement of the air bag and steering column jacket with U.S.-model 
    components; (c) installation of a knee bolster to augment the vehicle's 
    passive restraint system.
        Additionally, the petitioner states that the bumpers on the non-
    U.S.-certified 1993 model Sovereign must be reinforced to comply with 
    the Bumper Standard found in 49 CFR part 581.
        Interested persons are invited to submit comments on the petition 
    described above. Comments should refer to the docket number and be 
    submitted to: Docket Section, National Highway Traffic Safety 
    Administration, room 5109, 400 Seventh Street, SW., Washington, DC 
    20590. It is requested but not required that 10 copies be submitted.
        All comments received before the close of business on the closing 
    date indicated above will be considered, and will be available for 
    examination in the docket at the above address both before and after 
    that date. To the extent possible, comments filed after the closing 
    date will also be considered. Notice of final action on the petition 
    will be published in the Federal Register pursuant to the authority 
    indicated below.
    
        Authority: 15 U.S.C. 1397(c)(3)(A)(i)(I) and (C)(ii); 49 CFR 
    593.8; delegations of authority at 49 CFR 1.50 and 501.8.
    
        Issued on: May 17, 1994.
    William A. Boehly,
    Associate Administrator for Enforcement.
    [FR Doc. 94-12684 Filed 5-24-94; 8:45 am]
    BILLING CODE 4910-59-M
    
    
    

Document Information

Published:
05/25/1994
Department:
Transportation Department
Entry Type:
Uncategorized Document
Action:
Notice of receipt of petition for determination that nonconforming 1993 Jaguar Sovereign passenger cars are eligible for importation.
Document Number:
94-12684
Dates:
The closing date for comments on the petition is June 24, 1994.
Pages:
0-0 (1 pages)
Docket Numbers:
Federal Register: May 25, 1994, Docket No. 94-42, Notice 1