[Federal Register Volume 59, Number 85 (Wednesday, May 4, 1994)]
[Unknown Section]
[Page 0]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 94-10697]
[[Page Unknown]]
[Federal Register: May 4, 1994]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
[OPPTS-59979; FRL-4770-8]
Certain Chemicals; Premanufacture Notices
AGENCY: Environmental Protection Agency (EPA).
ACTION: Notice.
-----------------------------------------------------------------------
SUMMARY: Section 5(a)(1) of the Toxic Substances Control Act (TSCA)
requires any person who intends to manufacture or import a new chemical
substance to submit a premanufacture notice (PMN) to EPA at least 90
days before manufacture or import commences. Statutory requirements for
section 5(a)(1) premanufacture notices are discussed in the final rule
published in the Federal Register of May 13, 1983 (48 FR 21722). In the
Federal Register of November 11, 1984, (49 FR 46066) (40 CFR 723.250),
EPA published a rule which granted a limited exemption from certain PMN
requirements for certain types of polymers. Notices for such polymers
are reviewed by EPA within 21 days of receipt. This notice announces
receipt of 9 such PMN(s) and provides a summary of each.
DATES: Close of review periods:
Y 94-66, 94-67, 94-68, 94-69, 94-70, March 27, 1994.
Y 94-71, 94-72, 94-73, March 28, 1994.
Y 94-74, March 29, 1994.
FOR FURTHER INFORMATION CONTACT: Susan B. Hazen, Director,
Environmental Assistance Division (7408), Office of Pollution
Prevention and Toxics, Environmental Protection Agency, Rm. E-545, 401
M St., SW., Washington, DC, 20460 (202) 260-1024, TDD (202) 554-0551.
SUPPLEMENTARY INFORMATION: The following notice contains information
extracted from the nonconfidential version of the submission provided
by the manufacturer on the PMNs received by EPA. The complete
nonconfidential document is available in the TSCA Nonconfidential
Information Center (NCIC), Rm B-607, Northeast Mall, at the above
address between 12 noon and 4 p.m., Monday through Friday, excluding
legal holidays.
Importer. Hanse Chemical USA, Inc.
Chemical. (G) Biphenol A epoxy resin-silicone copolyester.
Use/Import. (G) Function: elastification additive application in
epoxy resin additives, potting, and casting. Import range: 2,000-40,000
kg/yr.
Manufacturer. Confidential.
Chemical. (G) An isophthallic acid, phthallic anhydride, neopentyl
glycol, trimethyl propane, ethylene glycol, 2-butyl-2-ethyl-1,3
propanediol polyester.
Use/Import. (G) Polyester resin used for industrial coating. Prod.
range: Confidential.
Manufacturer. Confidential.
Chemical. (G) Acrylic acid/vinyl ester copolymer.
Use/Import. (S) Thickening agent mainly for the cosmetic industry.
Prod. range: Confidential.
Importer. Unitika America Corporation.
Chemical. (G) Co-polyester.
Use/Import. (G) Resin for powder coating. Import range: 3,000-6,000
kg/yr.
Importer. Unitika American Corporation.
Chemical. (G) Co-polyester.
Use/Import. (G) Resin for powder coating. Import range: 3,000-6,000
kg/yr.
Manufacturer. Confidential.
Chemical. (G) Epoxy ester resin.
Use/Production. (G) Thermoset epoxy-ester for metal coatings. Prod.
range: Confidential.
Manufacturer. Henkel Corporation.
Chemical. (G) Polyester.
Use/Production. (S) Plasticizer for polyvinyl chloride resin. Prod.
range: 75,000-150,000 kg/yr.
Manufacturer. Air Products and Chemicals, Inc.
Chemical. (G) Acrylic ester copolymer.
Use/Production. (G) Adhesive. Prod. range: Confidential.
Manufacturer. Confidential.
Chemical. (S) Neopentyl glycol; trimethylolpropane; isophthalic
acid; C16'-18 and C18' fatty acids; phenyl, propyl
silicone resin; and trimellitic anhydride.
Use/Production. (S) Resin for water based paint. Prod. range:
2,700,000 kg/yr.
List of Subjects
Environmental protection, Premanufacture notification.
Dated: April 26, 1994.
Frank V. Ceasar,
Acting Director, Information Management Division, Office of Pollution
Prevention and Toxics.
[FR Doc. 94-10697 Filed 5-3-94; 8:45 am]
BILLING CODE 6560-50-F
